Manitou and Pike's Peak Railway

Manitou Springs, Colorado
Manitou Springs Historic District First Congregational Church - Manitou Mineral Springs - Manitou Springs Bridges - Midland Railroad - Midland Railroad Roundhouse - Manitou Post Office - Wheeler Bank - See also Historic buildings list
Historic hotels, inns and lodging Barker House - Briarhurst - Cliff House
Attractions Cave of the Winds - Cliff Dwellings - Cog Railway - Miramont Castle - Pikes Peak - See also Manitou Springs Attractions
Events Pikes Peak Ascent and Marathon - Pikes Peak International Hill Climb - Pikes Peak Marathon - See also Manitou Springs Events
Schools Manitou Springs School District 14 - Manitou Springs High School
Trails Barr Trail - Manitou Incline
Other Areas - Englemann Canyon- Iron Springs Radio Stations - KBIQ - KCME - KXRE Rivers and creeks - Fountain Creek - Ruxton Creek Transportation - Mountain Metropolitan Transit - US 24 - Ute Pass

The Broadmoor Pikes Peak Cog Railway (also known as the Pikes Peak Cog Railway) was an Abt rack system cog railway with 4 ft 8 ¹⁄₂ in (1,435 mm) standard gauge track in Colorado, USA, climbing the well-known mountain Pikes Peak. The base station was in Manitou Springs, Colorado near Colorado Springs.

The railway was the highest in North America by a considerable margin. It was built and operated solely for the tourist trade. As of March 15, 2018, the company has ceased operations for the foreseeable future. They state the entire infrastructure needs to be replaced or upgraded; this includes the rails, the ties, and the passenger cars.^[1][2][3]

History

Passengers aboard a train ca. 1890

The railway was started by Zalmon G. Simmons, inventor and founder of the Simmons Beautyrest Mattress Company. The company was founded in 1889 and limited service to the Halfway House Hotel was started in 1890. On June 30, 1891, the first train reached the summit.

Pikes Peak Cog Railway locomotive and car, circa 1900

A number of steam locomotives were built for the line by the Baldwin Locomotive Works, all rack-only locomotives with steeply inclined boilers to keep them level on the average 16% grades. Operating steam locomotives on such a line was back-breaking work and expensive, so when more modern forms of traction became available, the railway was eager to modernize.

A gasoline-powered railcar #7 was constructed in 1938. It was designed to be a cheaper alternative to the steam locomotives enabling economic service during quieter times of the year. Proving a huge success, the railway soon bought more internal combustion engined trains. This car is still on property having been re-engined with a more modern Cummins diesel.

The next were five 'streamlined' diesel locomotives from General Electric, which were equipped with matching passenger cars, acquired from 1939 onward.^[4] These slowly supplanted the steam locomotives, though some steam operations persisted until the 1960s as backup power and to operate the snow-clearing train (where their greater weight meant they were less likely to derail). A number of the steam locomotives are now on static display, in Manitou and elsewhere, and the Railway still has an operational steam locomotive (#4) and an original coach. The steam locomotive was put out of service for many years before being retrieved from a museum and brought back to service in 1980.

In 1964 the railway needed more equipment, but General Electric was not interested in the business. The railway went abroad, to Switzerland, home of most of the world's cog railways. In 1964, the Swiss Locomotive and Machine Works in Winterthur provided two bright red railcars (railcars contain a seating compartment as well as engineer stand, eliminating the need for a separate pushing locomotive), very similar to equipment used on many Swiss railways. Unit 14 was delivered in 1964 with a pair of air cooled 8 cylinder diesel engines that proved to be less than satisfactory on the railroad above treeline. Unit 14 was returned to Switzerland and redesigned to have facilities for water cooling. Unit 14's twin, Unit 15, was also rebuilt to house a pair of water cooled Cummins 724's. Two more (Units 16 and 17) were built in 1968 to increase the railroads capacity. All four of these units eventually received new Cummins 855 diesels. As of 2017 all four original Swiss trains are still in operation at the Manitou and Pikes Peak Cog Railway.

As tourism increased in the 1970s the railway needed more capacity. In 1976 M&PPRy took delivery of two larger two-car articulated railcars from the Swiss Locomotive and Machine Works of Winterthur, designated Train 18 and Train 19. Passing sidings were built in several places at about the same time, allowing trains to pass at various points on the mountainside. Trains could previously pass only at the Mountain View siding, permitting only three trains a day up the mountain. Eight trains per day became possible with the new equipment and sidings (two additional larger railcars were delivered from SLM; Unit 24 in 1984 and the last, Unit 25, in 1989).

Rolling stock on the M&PPRy consists of four 214-passenger articulated Swiss-built railcars, four 78-passenger Swiss-built railcars, four GE built locomotives (one being rebuilt in 2017 to modern specifications), one snowplow (#22 - built upon the frame of a GE locomotive), one 23-passenger diesel railcar (#7), one steam locomotive (#4 - built by Baldwin), a Winter-Weiss "streamliner" coach, and an original Wasson wooden coach (#104). Only the Swiss-built railcars carry regular passengers. The steam locomotive and passenger coaches are used on rare special occasions, but can no longer make it to the summit due to the demolition of most water towers on the line.

Manitou Incline

Night-time panorama of Colorado Springs as viewed from the Manitou Incline.

More commonly called simply the Manitou Incline, the Mount Manitou Scenic Incline Railway was actually a funicular up the side of a peak called Rocky Mountain located adjacent to Mount Manitou. It was operated by the Manitou and Pike's Peak Railway until its closure following a rockslide in 1990. This line's lower terminus was adjacent to the Cog Railway base station in Manitou Springs. The Manitou Incline averaged almost a 40% grade, gaining 2,011 feet (613 m) in elevation over a length of approximately 1 mile (1.6 km), with the maximum grade being 68%.

The Manitou Incline was initially built in 1907 for use in construction of city water lines and a hydroelectric plant. When the construction was finished, the Manitou and Pike's Peak Railway took over the cable car as a tourist operation.

From 1990 forward, the defunct Incline had been controversial because, although legally off-limits to the public, its roadbed was heavily used for recreation and exercise by people ignoring the trespassing signs. It became legal to use the Incline on February 1, 2013.^[5] Colorado Springs Parks and Recreation manages the Incline trail through an intergovernmental agreement.^[6]

Recent Operations and Present Status

Railway parked on the summit. It is snow-covered for most part of the year. This picture was taken in May.

As of 2017 the railway owns enough equipment (railcars and snow plows) to run six to eight trains per day from mid-May through mid-September. During "off-peak" months (mid-September through mid-December and mid-March through mid-May), from one to five trains are run per day, with additional trains added if there is sufficient demand.

The railway was usually closed from mid-December through mid-March unless the snow plows were able to clear the line, but in 2006 the railway began year-round service. The winter service varies according to demand: in January, for example, trains run once a day on weekends and holidays. These Winter operations were suspended on October 29, 2017, for maintenance to the railway. In March 2018 it was announced that the railway would remain closed indefinitely while feasibiltiy studies are completed.

On June 13, 2018, the Manitou Springs City Council approved a pair of tax incentives to fund repairs of the railway. If all goes to plan, the railway says, they will reopen in 2020.^[7]

Locomotive Roster

^[8]

No	Built	Manufacturer	Type	Builders Number	Class	Status	Notes	Photo
1	4/1890	Baldwin Locomotive Works	Steam Locomotive	10835/13318	0-4-2T	On display at the Colorado Railroad Museum	Originally built as the "John Hulbert", rebuilt as a Vauclain Compound and numbered #1 in 3/1893
2	5/1890	Baldwin Locomotive Works	Steam Locomotive	10919/13319	0-4-2T	On Display in Manitou Springs	Originally built as the "Manitou", renamed to "T.F. Richardson" at some point before 1898. Rebuilt as a Vauclain Compound and numbered #2 in 3/1893
3	5/1890	Baldwin Locomotive Works	Steam Locomotive	10920/13324	0-4-2T	Scrapped for parts	Originally built as "Pike's Peak", rebuilt as a Vauclain Compound and numbered #3 in 3/1893
1st 4	5/1892	Baldwin Locomotive Works	Steam Locomotive	12681	0-4-2T	Wrecked 8/31/1896, scrapped	The smallest engine the railway owned, was known as the "little 4". It was the first engine delivered as a Vauclain Compound, and its superiority over the previous 3 engines resulted in them being sent back to Baldwin to be rebuilt. Broke a side rod and ran away in August 1896
2nd 4	1/1897	Baldwin Locomotive Works	Steam Locomotive	12681	0-4-2T	Operational, run on special occasions with coach 104	Built to replaced wrecked #4. Built to the specifications of the original larger engines. #4 Was sent to the Colorado Railroad Museum after retirement in October 1968. It was then traded for #1 in November 1979.
5	4/1901	Baldwin Locomotive Works	Steam Locomotive	18939	0-4-2T	On display in front of Broadmoor Hall	First engine built with an automatic brake. This engine was displayed at the Cog Railway Depot in Manitou for many years before being moved to the Broadmoor Hotel and put on display.
6	6/1906	Baldwin Locomotive Works	Steam Locomotive	28401	0-6-0T	Scrapped 1955	#6 was delivered as an Oil burner, it was converted to burn coal in 1907. #6 was the largest and most powerful engine delivered to the cog railway, however it suffered from mechanical issues and was usually the last engine in the lineups.
7	1938	Colorado Midland Shops	Gas Railcar (Diesel)			Stored Semi-serviceable	#7 was built in the Colorado Midland shops in 1938 for the purpose of having a smaller piece of equipment to run that was cheaper to operate when the off season occurred. Originally GM powered with 707 gasoline engines, it was repowered by Cadillac V8 in the early 1950s and finally with a Cummins diesel in the 1990s.
8	1939	General Electric	Diesel Electric Power car	12454		Stored Un-serviceable	First GE Unit delivered to the railway, builders number 12454. It had 3 2 stroke General Motors 71 engines and internal Dynamic brakes. Was retired with the arrival of the Swiss units and robbed of parts to maintain other engines.
9	1946	General Electric	Diesel Electric Power car	28372		Active Service for work trains.	Unit 9 was powered by 2 Cummins NHS diesels as built. Later rebuilt to have twin Cummins 855 Diesels.
10	1950	General Electric	Diesel Electric Power car	30279		Frame re-used for snowplow #22	Unit 10 was powered by 2 Cummins NHS diesels as built. The frame of this unit was the basis for snowplow 22.
11	1950	General Electric	Diesel Electric Power car	30280		Active Service for work trains.	Unit 11 was powered by 2 Cummins NHS diesels as built. Later rebuilt with Cummins 855 diesels.
12	1955	Manitou and Pikes Peak shops	Diesel Electric Power car			Rebuilt to unit 23	Built by the railroad shops, unit 12 was powered by 2 General Motors 110 diesels. Was built to the same body style as the GE built units. Rebuilt to Unit 23 1982.
14	1963	Swiss Locomotive and Machine Works	Diesel-Electric	4441	Bhm 2/4	Active service	78 Passenger. 14 was built with air cooled V8 diesels. These did not prove to be satisfactory on Pikes Peak and the unit was returned to Switzerland to be re-powered with Cummins 723's. Later replaced with Cummins 855's from units 18/19
15	1963	Swiss Locomotive and Machine Works	Diesel Electric	4442	Bhm 2/4	Active Service	78 Passenger. Built with Air Cooled V8's but never shipped with them. Received Cummins 723's and later 855's from units 18/19
16	1968	Swiss Locomotive and Machine Works	Diesel Electric	4778	Bhm 2/4	Active Service	78 Passenger. Built with Cummins 723's, re-powered with a big cam 855. Lacks the Vents found on 14 & 15. Lettered with US Railway Post Office Lettering in 1993 for the Centennial of America the Beautiful.
17	1968	Swiss Locomotive and Machine Works	Diesel Electric	4779	Bhm 2/4	Active Service	78 Passenger. Built with Cummins 723's, re-powered with 855's from units 18/19. Lacks the Vents found on 14 & 15.
18	1975	Swiss Locomotive and Machine Works	Diesel Hydraulic	5046	Bhm 4/8	Active Service	214 Passenger. Built with Cummins small cam 855's, later re-powered with big cam 855's. Unit was fully rewired and had new electronics installed in Winter 2016.
19	1975	Swiss Locomotive and Machine Works	Diesel Hydraulic	5047	Bhm 4/8	Active Service	214 Passenger. Built with Cummins small cam 855's, later re-powered with big cam 855's.
20	1934	Manitou and Pikes Peak Shops	Gas Work Car			Scrapped	A self-propelled work truck built in the shops in 1934. Its original Pierce Arrow engine was replaced by #7's former 707 engine in the 1950s. Unit later received the number 20 and was scrapped in 1982. It was replaced in work service by a rebuilt unit 23.
21	1953	Manitou and Pikes Peak Shops	Rotary Snowplow			Scrapped	Built in house in the 1950s, powered by General Motors 110 engines. This rotary snowplow proved to be unsuccessful in clearing large drifts from the track and it was replaced with snowplow 22.
22	1974	American Snowblast	Snowplow, Diesel Hydraulic			Active Service	Built on the frame on GE #10. Fully Diesel Hydraulic with a Cummins 1710 V-12.
23	1982	Manitou and Pikes Peak shops	Diesel Electric Power Car			Rebuilt to unit 26	Shop built unit #12 was rebuilt to unit 23 following the scrapping of work car 20. It had a roll up door and single Cummins 855 for power. Sent off to be rebuilt in 2015
24	1983	Swiss Locomotive and Machine Works	Diesel Hydraulic	5275	Bhm 4/8	Active Service	214 Passenger. Delivered with Cummins 855's, First train delivered with mustard color interiors.
25	1988	Swiss Locomotive and Machine Works	Diesel Hydraulic	5418	Bhm 4/8	Active Service	214 Passenger. Delivered with Cummins 855's. Features automotive style outboard headlights instead of the railroad center mounts.
26	2017		Diesel Electric power car			Testing	Formerly GE unit #12. Sent away for rebuild in 2015. Was returned to the railway October 30, 2017 and is currently undergoing testing.

-All steam locomotives were rebuilt in 1912 with new frames and rod arrangements in the Manitou shops using kits supplied by Baldwin Locomotive works. This resulted in all engines having boilers of 44 inches in diameter, 19.7 Square feet of grate area, a total heating surface of 576 square feet, and a water capacity of 600 gallons. These engines would burn slightly under 1 ton of coal per trip.^[9]

-The Diesel Hydraulic units 18/19/24/25 were built with transmissions built by twin disk in Wisconsin. These had Voith hydraulic retarders installed to the transmissions. In 1997, units 18 and 19 received new turbo transmissions with built in retarders from Voith. A total of 9 transmissions were ordered in 1997, one being a spare. In 2003, units 24 and 25 also received the Voith transmissions.

Rolling Stock Roster

Not included in this roster is the work equipment the railway has used throughout the years. These cars do not carry numbers and the records for these cars is limited. The original order of wooden coaches from Wason contained 2 flat cars, and these were later supplemented by one of the wooden coaches being cut down to make a longer flat car. One of these flat cars was usually left below the depot and the other was kept at Minnehaha. Later these 2 flat cars were rebuilt with steel underframes. Today there are 2 flat cars on property, a flatcar with a wedge plow and steel deck for work train service, and a flatcar with a wooden deck and crane used around the shop. The steel flatcar with the snowplow wedge is used to clear snow when not enough accumulation has occurred to warrant the snowplow. It features a hydraulic dump to assist with unloading snow.

See also

References

External links

Wikimedia Commons has media related to Manitou and Pike's Peak Railway.

• Manitou and Pike's Peak Railway home page
• Information on the Manitou Incline trail
• The Pikes Peak Web site

Coordinates: 38°51′22″N 104°55′53″W / 38.85605°N 104.93130°W / 38.85605; -104.93130