Videotex character set

The character sets used by Videotex are based, to greater or lesser extents, on ISO/IEC 2022. Three Data Syntax systems are defined by ITU T.101, corresponding to the Videotex systems of different countries.

Data Syntax 1

Data Syntax 1 is defined in Annex B of T.101:1994. It is based on the CAPTAIN system used in Japan. Its graphical sets include JIS X 0201 and JIS X 0208.

The following G-sets are available through ISO/IEC 2022-based designation escapes:[1]:AnxB.2.3

NameG-set escape typeF byteISO-IR for F byte
Primary Character setSingle byte 94-code0x4A (J)ISO-IR-14 (JIS X 0201 Roman)
Katakana Character setSingle byte 94-code0x49 (I)ISO-IR-13 (JIS X 0201 Kana)
Mosaic I setSingle byte 94-code0x33 (3)(Occupies private-use F byte; also registered as ISO-IR-137 with F byte 0x79)[2]
Mosaic II setSingle byte 94-code0x63 (c)ISO-IR-71[3]
Display Control setSingle byte 96-code0x38 (8)(Occupies private-use F byte)
PDI setSingle byte 96-code0x57 (W)(F byte exceptionally reserved and not used in ISO-IR)[4]
MVI setSingle byte 96-code0x39 (9)(Occupies private-use F byte)
Kanji setMultiple byte 94n-code0x42 (B)ISO-IR-87 (JIS X 0208:1983)
Macro setSingle byte DRCS 96-code0x40 (@)(Uses a DRCS escape syntax)
DRCS I setSingle byte DRCS 94-code0x41 (A)(Is a DRCS)
DRCS II setMultiple byte DRCS 94n-code0x40 (@)(Is a DRCS)

Mosaic sets for Data Syntax 1

The mosaic sets supply characters for use in semigraphics.

Videotex Mosaic set: First Mosaic set for Data Syntax 1 (partial Unicode mapping)[2]
_0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F
0_
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
1_
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
2_
 

2596

 

 

259F

 

 

 

 

 

 

 
🮛
1FB9B

 

 

 
3_
2584

2597

 

 

2599

 

 

 

 

 

 

 
🮚
1FB9A

 

 

 
4_
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
5_
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
6_ 🭒
1FB52
🭓
1FB53
🭔
1FB54
🭕
1FB55
🭖
1FB56

25E5
🭗
1FB57
🭘
1FB58
🭙
1FB59
🭚
1FB5A
🭛
1FB5B
🭜
1FB5C
🭬
1FB6C
🭭
1FB6D

 

 
7_ 🭝
1FB5D
🭞
1FB5E
🭟
1FB5F
🭠
1FB60
🭡
1FB61

25E4
🭢
1FB62
🭣
1FB63
🭤
1FB64
🭥
1FB65
🭦
1FB66
🭧
1FB67
🭮
1FB6E
🭯
1FB6F

  Letter  Number  Punctuation  Symbol  Other  Undefined   � Not in Unicode


Videotex Mosaic set: Second Mosaic set for Data Syntax 1[3]
_0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F
0_
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
1_
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
2_ 🬀
1FB00
🬁
1FB01
🬂
1FB02
🬃
1FB03
🬄
1FB04
🬅
1FB05
🬆
1FB06
🬇
1FB07
🬈
1FB08
🬉
1FB09
🬊
1FB0A
🬋
1FB0B
🬌
1FB0C
🬍
1FB0D
🬎
1FB0E
3_ 🬏
1FB0F
🬐
1FB10
🬑
1FB11
🬒
1FB12
🬓
1FB13

258C
🬔
1FB14
🬕
1FB15
🬖
1FB16
🬗
1FB17
🬘
1FB18
🬙
1FB19
🬚
1FB1A
🬛
1FB1B
🬜
1FB1C
🬝
1FB1D
4_ 🬼
1FB3C
🬽
1FB3D
🬾
1FB3E
🬿
1FB3F
🭀
1FB40

25E3
🭁
1FB41
🭂
1FB42
🭃
1FB43
🭄
1FB44
🭅
1FB45
🭆
1FB46
🭨
1FB68
🭩
1FB69
🭰
1FB70
🮕
1FB95
5_ 🭇
1FB47
🭈
1FB48
🭉
1FB49
🭊
1FB4A
🭋
1FB4B

25E2
🭌
1FB4C
🭍
1FB4D
🭎
1FB4E
🭏
1FB4F
🭐
1FB50
🭑
1FB51
🭪
1FB6A
🭫
1FB6B
🭵
1FB75

2588
6_ 🬞
1FB1E
🬟
1FB1F
🬠
1FB20
🬡
1FB21
🬢
1FB22
🬣
1FB23
🬤
1FB24
🬥
1FB25
🬦
1FB26
🬧
1FB27

2590
🬨
1FB28
🬩
1FB29
🬪
1FB2A
🬫
1FB2B
🬬
1FB2C
7_ 🬭
1FB2D
🬮
1FB2E
🬯
1FB2F
🬰
1FB30
🬱
1FB31
🬲
1FB32
🬳
1FB33
🬴
1FB34
🬵
1FB35
🬶
1FB36
🬷
1FB37
🬸
1FB38
🬹
1FB39
🬺
1FB3A
🬻
1FB3B

  Letter  Number  Punctuation  Symbol  Other  Undefined

Data Syntax 2

Data Syntax 2 is defined in Annex C of T.101:1994. It corresponds to some European Videotex systems such as CEPT T/CD 06-01. The graphical character coding of Data Syntax 2 is based on T.51.

The default G2 set of Data Syntax 2 is based on an older version of T.51, lacking the non-breaking space, soft hyphen, not sign (¬) and broken bar (¦) present in the current version, but adding a dialytika tonoscombining form is U+0344) at the beginning of the row of diacritical marks for combination with codes from a Greek primary set.[5] An umlaut diacritic code distinct from the diaeresis code, as included in some versions of T.61, is also sometimes included.[6]

The default G1 set is the second mosaic set, corresponding roughly to the second mosaic set of Data Syntax 1.[1]:AnxCpt1/TableC.11 The default G3 set is the third mosaic set, matching the first mosaic set of Data Syntax 1 for 0x60 through 0x6D and 0x70 through 0x7D, and otherwise differing.[1]:AnxCpt1/TableC.12 The first mosaic set matches the second except for 0x40 through 0x5E: 0x40 through 0x5A follow ASCII (supplying uppercase letters), whereas the remainder are national variant characters; the displaced full block is placed at 0x7F.[1]:AnxCpt1/TableC.10

Videotex Mosaic set: First Mosaic set for Data Syntax 2[1]:AnxCpt1/TableC.10
_0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F
0_
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
1_
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
2_ SP
0020
🬀
1FB00
🬁
1FB01
🬂
1FB02
🬃
1FB03
🬄
1FB04
🬅
1FB05
🬆
1FB06
🬇
1FB07
🬈
1FB08
🬉
1FB09
🬊
1FB0A
🬋
1FB0B
🬌
1FB0C
🬍
1FB0D
🬎
1FB0E
3_ 🬏
1FB0F
🬐
1FB10
🬑
1FB11
🬒
1FB12
🬓
1FB13

258C
🬔
1FB14
🬕
1FB15
🬖
1FB16
🬗
1FB17
🬘
1FB18
🬙
1FB19
🬚
1FB1A
🬛
1FB1B
🬜
1FB1C
🬝
1FB1D
4_ @
0040
A
0041
B
0042
C
0043
D
0044
E
0045
F
0046
G
0047
H
0048
I
0049
J
004A
K
004B
L
004C
M
004D
N
004E
O
004F
5_ P
0050
Q
0051
R
0052
S
0053
T
0054
U
0055
V
0056
W
0057
X
0058
Y
0059
Z
005A
a
2190
½a
00BD
a
2192
a
2191
⌗/_b
2317/005F
6_ 🬞
1FB1E
🬟
1FB1F
🬠
1FB20
🬡
1FB21
🬢
1FB22
🬣
1FB23
🬤
1FB24
🬥
1FB25
🬦
1FB26
🬧
1FB27

2590
🬨
1FB28
🬩
1FB29
🬪
1FB2A
🬫
1FB2B
🬬
1FB2C
7_ 🬭
1FB2D
🬮
1FB2E
🬯
1FB2F
🬰
1FB30
🬱
1FB31
🬲
1FB32
🬳
1FB33
🬴
1FB34
🬵
1FB35
🬶
1FB36
🬷
1FB37
🬸
1FB38
🬹
1FB39
🬺
1FB3A
🬻
1FB3B

2588

  Letter  Number  Punctuation  Symbol  Other  Undefined

  • ^a Representation of 0x5B-5E is not guaranteed in international communication and may be replaced by national application oriented variants.[1]
  • ^b 0x5F may be displayed either as ⌗ (square) or _ (lower bar) to represent the terminator function required by Videotex services.[1]

Data Syntax 3

Data Syntax 2 is defined in Annex D of T.101:1994. The graphical character coding of Data Syntax 3 is based on T.51.

The supplementary set for Data Syntax 3 is based on an older version of T.51, lacking the non-breaking space, soft hyphen, not sign (¬) and broken bar (¦) present in the current version, and allocating non-spacing marks for the overline and solidus and several semigraphic characters to unallocated space in that set.

See the comments in the T.51 article for caveats about the combining mark Unicode mappings shown below. Unlike Unicode combining characters, T.51 diacritic codes precede the base character.

Supplementary Set for Videotex Data Syntax 3[7]
_0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F
0_/8_
1_/9_
2_/A_ ¡
00A1
¢
00A2
£
00A3
$
0024
¥
00A5
#
0023
§
00A7
¤
00A4

2018

201C
«
00AB

2190

2191

2192

2193
3_/B_ °
00B0
±
00B1
²
00B2
³
00B3
×
00D7
µ
00B5

00B6
·
00B7
÷
00F7

2019

201D
»
00BB
¼
00BC
½
00BD
¾
00BE
¿
00BF
4_/C_ ̅
0305
̀
0300
́
0301
̂
0302
̃
0303
̄
0304
̆
0306
̇
0307
̈
0308
̸
0338
̊
030A
̧
0327
̲
0332
̋
030B
̨
0328
̌
030C
5_/D_
2015
¹
00B9
®
00AE
©
00A9

2122

266A

2500

2502

2571

2572

25E2

25E3

215B

215C

215D

215E
6_/E_
2126
Æ
00C6
Đ/Ð
0110/00D0
ª
00AA
Ħ
0126

253C
IJ
0132
Ŀ
013F
Ł
0141
Ø
00D8
Œ
0152
º
00BA
Þ
00DE
Ŧ
0166
Ŋ
014A
ʼn
0149
7_/F_ ĸ
0138
æ
00E6
đ
0111
ð
00F0
ħ
0127
ı
0131
ij
0133
ŀ
0140
ł
0142
ø
00F8
œ
0153
ß
00DF
þ
00FE
ŧ
0167
ŋ
014B

  Letter  Number  Punctuation  Symbol  Other  Undefined  Differences from T.51 (1988 edition, first supplementary set)

C0 control codes

C0 control codes for Videotex differ from ASCII as shown in the table below. The NUL, BEL, SO (LS1), SI (LS0) and ESC codes are also available in some or all data syntaxes, but without change in name or semantic from ASCII.[8][9][10]

Seq Dec Hex Replaced Syntaxes Acronym Name Description
^H0808BS1,[8] 2,[9] 3[10]APBActive Position Backward Moves cursor one position backward. If it is at the start of the line, moves it to the end of the line and back one line. This retains one possible semantic of the ASCII BS.
^I0909HT1,[8] 2,[9] 3[10]APFActive Position Forward Moves cursor one position forward. If it is at the end of the line, moves it to the start of the line and forward one line.
^J100ALF1,[8] 2,[9] 3[10]APDActive Position Down Moves cursor one line forward. If it is at the last line of the screen, moves it to the first line unless Data Syntax 3 scroll mode is active. This retains one possible semantic of the ASCII LF.
^K110BVT1,[8] 2,[9] 3[10]APUActive Position Up Moves cursor one line backward. If it is at the first line of the screen, moves it to the last line unless Data Syntax 3 scroll mode is active.
^L120CFF1,[8] 2,[9] 3[10]CSClear Screen Resets entire display to spaces with default display attributes and returns the cursor to its initial position. In Data Syntax 1, also resets macros and DRCS. This retains one possible semantic of the ASCII FF.
^M130DCR1,[8] 2,[9] 3[10]APRActive Position Return Moves the cursor to the start of the line. In Data Syntax 3, may instead move it to the start of the active field if it is entirely within it. This retains one possible semantic of the ASCII CR.
^Q1711DC1/XON2[9]CONCursor On Makes the cursor visible.
^R1812DC22[9]RPTRepeat Repeats the immediately preceding graphic character a number of times indicated by the low six bits of the following byte (from 0x40 to 0x7F).
^T2014DC41[1]:AnxB.3.1KMCKey-In-Monitor Conceal Takes one parameter: 0x40 makes the key-in-monitor area unconcealed, 0x41 makes it concealed.
2[9]COFCursor Off Makes the cursor invisible.
^X2418CAN1,[8] 2,[9] 3[10]CANCancel In Data Syntax 2, fill the rest of the current line (after the current position) with spaces (compare EL). In Data Syntax 1 and 3, immediately stop all running macros. Contrast the semantic of basic ASCII CAN.
^Y2519EM1,[8] 2,[9] 3[10]SS2Single Shift Two Non-locking shift code for G2.
^Z261ASUB3[10]SDCService Delimitor Character Implementation-defined but non-presentational.
^\281CFS1,[8] 3[10]APSActive Position Set Followed by two bytes (from 0x40 to 0x7F; may also be from 0xA0 to 0xFF in Data Syntax 3) respectively giving a row and column address in their low six bits. Compare CUP and HVP.
^]291DGS1,[8] 2,[9] 3[10]SS3Single Shift Three Non-locking shift code for G3.
^^301ERS1,[8] 2,[9] 3[10]APHActive Position Home Returns cursor to the initial position.
^_311FUS1,[8] 3[10]NSRNon-Selective Reset Resets all display attributes (including ISO 2022 state, domain, text parameters, textures, colour mode but not macros, DRCS or programmable masks), then moves the cursor to a specified position. Followed by two bytes (from 0x40 to 0x7F; may also be from 0xA0 to 0xFF in Data Syntax 3) respectively giving a row and column address in their low six bits. Compare RIS.
2[9]APAActive Position Address Followed by two or four bytes (from 0x40 to 0x7F) giving a row and column address in their low six bits. Four bytes are used if there are more than 63 rows and columns, with the most significant six bits being first for each parameter. Compare CUP and HVP. If the following byte is not in the range of 0x40 to 0x7F, indicates a switch to another coding scheme (contrast DOCS).

C1 control codes

The following specialised C1 control codes are used in Videotex. There are four registered sets, with some differences between them.

8-bitEscape Data Syntax 1[11] Data Syntax 2, "Parallel" C1 set[12][1]:AnxC.3.3.2 Data Syntax 2, "Serial" C1 set[13][1]:AnxC.3.3.1 Data Syntax 3[14]
0x80ESC 0x40 (@)BKF, Black Foreground.ABK, Alpha Black. Switch to alphabetic, black foreground.DEFM, Define Macro. Next character (from 0x20 to 0x7F) gives macro name, rest is stored as part of macro until another DEF* or an END.
0x81ESC 0x41 (A)RDF, Red Foreground.ANR, Alpha Red. Switch to alphabetic, red foreground.DEFP, Define P-Macro. Like DEFM, but simultaneously defines and executes the macro.
0x82ESC 0x42 (B)GRF, Green Foreground.ANG, Alpha Green. Switch to alphabetic, green foreground.DEFT, Define Transmit-Macro. Like DEFM but defines a macro to be transmitted, not executed.
0x83ESC 0x43 (C)YLF, Yellow Foreground.ANY, Alpha Yellow. Switch to alphabetic, yellow foreground.DEFD, Define DRCS. Defines a character in the Dynamically Redefinable Character Set. Expected to be followed by the character code defined (from 0x20 to 0x7F) unless it terminates a previous DEFD, in which case it defines the next code. Terminated by another DEF* or an END
0x84ESC 0x44 (D)BLF, Blue Foreground.ANB, Alpha Blue. Switch to alphabetic, blue foreground.DEFX, Define Texture. Defines a texture mask. Expected to be followed by the texture mask ID defined (from 0x40 to 0x44). Terminated by another DEF* or an END
0x85ESC 0x45 (E)MGF, Magenta Foreground.ANM, Alpha Magenta. Switch to alphabetic, magenta foreground.END, End. Terminates a macro, DRCS character or texture definition. Also used in unprotected fields.
0x86ESC 0x46 (F)CNF, Cyan Foreground.ANC, Alpha Cyan. Switch to alphabetic, cyan foreground.REP, Repeat. Repeats preceding spacing graphical character a number of times specified by the following byte (from 0x40 to 0x7F).
0x87ESC 0x47 (G)WHF, White Foreground.ANW, Alpha White. Switch to alphabetic, white foreground.REPE, Repeat to End of Line. Repeats preceding spacing graphical character until the end of the line is reached.
0x88ESC 0x48 (H)SSZ, Small Size. Characters half normal width and heightFSH, Flashing. Characters displayed flashing between foreground and background.REVV, Reverse Video. Enables reverse video mode.
0x89ESC 0x49 (I)MSZ, Medium Size. Characters normal height, half normal widthSTD, Steady. Terminates flashing.NORV, Normal Video. Disables reverse video mode.
0x8AESC 0x4A (J)NSZ, Normal Size. Characters normal width and height.EBX, End Box. Terminates SBX.SMTX, Small Text. Text size 1/80 of screen width and 5/128 of screen height.
0x8BESC 0x4B (K)SZX, Size Control. Followed by a one-byte parameter. 0x41 means double height (DBH), 0x44 means double width (DBW), 0x45 means doubled width and height (DBS).[1]:AnxB.3.2.2SBX, Start Box. Defines a non-alphanumeric area, with transparent background. Terminated by EBX.METX, Medium Text. Text size 1/32 of screen width and 3/64 of screen height.
0x8CESC 0x4C (L)(not used)NSZ, Normal Size. Characters normal width and height.NOTX, Normal Text. Text size 1/40 of screen width and 5/128 of screen height.
0x8DESC 0x4D (M)(not used)DBH, Double Height. Characters normal width and double normal height. Inactive on top line.DBH, Double Height. Characters normal width and double normal height. Inactive on bottom line.DBH, Double Height. Text size 1/40 of screen width and 5/64 of screen height.
0x8EESC 0x4E (N)CON, Cursor On. Makes cursor visible.DBW, Double Width. Characters normal height and double normal width. Inactive in last position of line.BSTA, Blink Start.
0x8FESC 0x4F (O)COF, Cursor Off. Makes cursor invisible.DBS, Double Size. Characters normal height and double normal width. Inactive on top line or in last position of line.DBS, Double Size. Characters normal height and double normal width. Inactive on bottom line or in last position of line.DBS, Double Size. Text size 1/20 of screen width and 5/64 of screen height.
0x90ESC 0x50 (P)COL, Background or Foreground Colour. Takes a one-byte parameter. 0x48–0x4F sets a reduced intensity foreground. 0x50–0x57 sets background colour. 0x58–0x5F sets a reduced intensity background. Colour order is the same as that of the individual foreground colour controls (black, red, green, yellow, blue, magenta, cyan, white), but transparent takes the place of reduced intensity black.[1]:AnxB.3.2.1BKB, Black Background.MBK, Mosaic Black. Switch to mosaic, black foreground.PRO, Protect. Makes all character fields within the active field protected.
0x91ESC 0x51 (Q)FLC, Flashing Control. Takes one parameter: 0x40 for "normal" flashing, 0x41 through 0x47 for other flashing modes, 0x4F for steady (terminate flashing).[1]:AnxB.3.2.4RDB, Red Background.MSR, Mosaic Red. Switch to mosaic, red foreground.(EDC1, not used)
0x92ESC 0x52 (R)CDC, Conceal Display Control. Takes a one-byte parameter defining conceal display attributes, which can make text invisible until user interaction. 0x40 is used to start a concealed range (CDY), 0x4F is used to terminate it (SCD).[1]:AppB.3.2.7GRB, Green Background.MSG, Mosaic Green. Switch to mosaic, green foreground.(EDC2, not used)
0x93ESC 0x53 (S)(not used)YLB, Yellow Background.MSY, Mosaic Yellow. Switch to mosaic, yellow foreground.(EDC3, not used)
0x94ESC 0x54 (T)(not used)BLB, Blue Background.MSB, Mosaic Blue. Switch to mosaic, blue foreground.(EDC4, not used)
0x95ESC 0x55 (U)P-MACRO, Photo Macro. Followed by a single-byte parameter (0x40 for define, 0x41 for define and execute, 0x42 to define a transmit-macro, 0x4F to delimit the end of a macro definition).[1]:AppB.3.2.9 Second single-byte parameter (from 0x20 to 0x7F) identifies the photo macro being defined (from PM0 to PM95).MGB, Magenta Background.MSM, Mosaic Magenta. Switch to mosaic, magenta foreground.WWON, Word Wrap On.
0x96ESC 0x56 (V)(not used)CNB, Cyan Background.MSC, Mosaic Cyan. Switch to mosaic, cyan foreground.WWOF, Word Wrap Off.
0x97ESC 0x57 (W)(not used)WHB, White Background.MSW, Mosaic White. Switch to mosaic, white foreground.SCON, Scroll On. Next-lining off the bottom of the screen moves the rest of the screen up to make space.
0x98ESC 0x58 (X)RPC, Repeat Control. Repeats preceding spacing graphical character a number of times specified by the low six bits of the following byte (from 0x40 to 0x7F). Repeats to end of line if byte is 0x40. Compare REP from Data Syntax 3.CDY, Conceal Display. Display characters as spaces (might be terminated by SCD).SCOF, Scroll Off. Next-lining off the bottom of the screen wraps around to the top of the screen.
0x99ESC 0x59 (Y)SPL, Stop Lining. Terminates underlining. For mosaic characters, non-underlined font corresponds to contiguous display, with the blocks within a mosaic character joined together.USTA, Underline Start. Begins underlined letters, and switches to separated display for mosaics.
0x9AESC 0x5A (Z)STL, Start Lining. Begins underlined letters. For mosaics, this corresponds to separated display, with the blocks within a mosaic character shown separated.USTO, Underline Stop. Terminates underlining, and switches to contiguous display for mosaics.
0x9BESC 0x5B ([)(not used)CSI, Control Sequence Introducer.FLC, Flash Cursor. User input cursor turned on, flashing.
0x9CESC 0x5C (\)(not used)NPO, Normal Polarity. Foreground in foreground colour, background in background colour.BBD, Black Background.STC, Steady Cursor. User input cursor turned on, always visible.
0x9DESC 0x5D (])(not used)IPO, Inverted Polarity. Foreground in background colour, background in foreground colour.NBD, New Background. Set background colour to previous foreground colour. The current foreground colour is not affected.COF, Cursor Off. User input cursor invisible, but still functional.
0x9EESC 0x5E (^)UNP, Unprotected. Makes following characters unprotected from user input.TRB, Transparent Background.HMS, Hold Mosaic. Image subsequently stored control functions as the last received mosaic character.BSTO, Blink Stop.
0x9FESC 0x5F (_)PRT, Protected. Makes following characters protected from user inputSCD, Stop Conceal. Terminate CDY.RMS, Release Mosaic. Terminate HMS.UNP, Unprotect. Makes a field unprotected (open to user input).

References

  1. ITU-T (1994-11-11). International interworking for Videotex services. T.101:1994.
  2. CCITT (1987-07-31). "Mosaic-1 Set of Data Syntax 1 of CCITT Rec. T.101" (PDF). ITSCJ/IPSJ. ISO-IR-137. Retrieved 8 February 2019.
  3. CCITT (1983-10-01). Second Supplementary Set of Mosaic Characters (PDF). ITSCJ/IPSJ. ISO-IR-71.
  4. "2.9 Synopsis table". International Register of Coded Character Sets for Use With Escape Sequences (PDF). ITSCJ/IPSJ. p. 22. ISO-IR. Bit combination 5/7 of table 3 will not be allocated in order to avoid problems with an earlier usage by CCITT.
  5. CCITT (1988-11-01). Supplementary Set of Graphic Characters for Videotex (PDF). ITSCJ/IPSJ. ISO-IR-70(rev).
  6. See Table C.9 in Annex C part 1 of T.101.[1] Caveat: the table itself is displayed in the PDF with severe mojibake (hence why the displayed table does not appear to correspond to the associated notes), and is supposed to look like ISO-IR-70[5] (besides the additional highlighted umlaut code).
  7. CCITT (1986-11-30). Supplementary Set of Graphic Characters for CCITT Recommendation T.101, Data Syntax III (PDF). ITSCJ/IPSJ. ISO-IR-128.
  8. CCITT (1987-07-31). Primary Control Set of Data Syntax I of CCITT Rec. T.101 (PDF). ITSCJ/IPSJ. ISO-IR-132.
  9. CCITT (1987-07-31). Primary Control Set of Data Syntax II of CCITT Rec. T.101 (PDF). ITSCJ/IPSJ. ISO-IR-134.
  10. CCITT (1987-07-31). Primary Control Set of Data Syntax III of CCITT Rec. T.101 (PDF). ITSCJ/IPSJ. ISO-IR-135.
  11. CCITT (1987-07-31). Supplementary Control Set of Data Syntax I of CCITT Rec. T.101 (PDF). ITSCJ/IPSJ. ISO-IR-133.
  12. CCITT (1983-10-01). Attribute Control Set for Videotex (PDF). ITSCJ/IPSJ. ISO-IR-73.
  13. BSI (1982-06-01). Attribute Control Set for UK Videotex (PDF). ITSCJ/IPSJ. ISO-IR-56.
  14. CCITT (1987-07-31). The Supplementary Control Set of Data Syntax III of CCITT Rec. T.101 (PDF). ITSCJ/IPSJ. ISO-IR-136.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.