Craigieburn railway line

Craigieburn
Overview
Service type	Commuter rail
Status	Operational
Locale	Melbourne, Victoria, Australia
Current operator(s)	Metro Trains
Route
Start	Craigieburn
Stops	18 (via Southern Cross)
End	Flinders Street
Distance travelled	27.0 km (16.8 mi)
Average journey time	44 minutes
Service frequency	3–12 minutes weekdays peak 20 minutes daytime 30 minutes evenings 60 minutes early weekend mornings
Line(s) used	Tocumwal City Loop
On-board services
Disabled access	Yes
Technical
Rolling stock	Comeng, Siemens
Track gauge	1,600 mm (5 ft 3 in)
Electrification	1500 V DC overhead
Track owner(s)	VicTrack
Route map km Tocumwal line to ● Seymour and ● Shepparton North East line to ● Albury and Central (Sydney) 27.0 Craigieburn ● 2 23.0 Roxburgh Park 2 Upfield line to North Melbourne 19.3 Coolaroo 2 Broadstore line to Maygar Barracks 18.1 Broadmeadows ●●● 2 Western Ring Road Albion–Jacana line to Albion North East line to ● Southern Cross 16.6 Jacana 2 15.8 Glenroy 1/2 14.1 Oak Park 1/2 12.5 Pascoe Vale 1/2 CityLink Moonee Ponds Creek 11.0 Strathmore 1 10.4 Glenbervie 1 9.2 Essendon ●●■ 1 8.1 Moonee Ponds 1 7.0 Ascot Vale 1 Flemington Racecourse line to ● Flemington Racecourse 5.6 Newmarket ■ 1 4.7 Kensington 1 Deniliquin line ●●●●●●●●●● via South Kensington CityLink Moonee Ponds Creek Upfield line to ● Upfield 2.9 North Melbourne ●●●●●●● 1 North East and Western lines to ● Albury, Central (Sydney) & Adelaide Parklands 1.2 Southern Cross ●●●●●●●●● 1 Flagstaff ●●●●■■■ 1 Melbourne Central ■■■■■■■■■■ 1 Parliament ●●●●●●●●●●■■■■■■■ 1 0.0 Flinders Street ●●●●●●●●●● 1 Hurstbridge line to ● Hurstbridge & ● South Morang Multiple lines ●●●●●●●●●● via Richmond

The Craigieburn railway line (previously the Broadmeadows line) is a commuter rail passenger train service operating between Craigieburn in the northern suburbs and Flinders Street in the central business district of Melbourne, Australia. The service is part of the Public Transport Victoria metropolitan rail network.

Description

The line rises steadily after leaving North Melbourne until after Essendon, then drops a little to cross Moonee Ponds Creek, and soon after encounters the Glenroy Bank, a continuous rising gradient of 1 in 50 for nearly 3 kilometres (1.9 mi) that taxed locomotive-hauled trains in the days of steam. After Glenroy, it continues to rise to the end of the suburban line and beyond. Earthworks are, however, generally moderate.

The almost-continuous gradients were a factor when, in 2003, an unmanned suburban train rolled the length of the line from Broadmeadows to the city, and crashed into a stationary but loaded passenger train waiting to depart Southern Cross Station (then Spencer Street). No one was killed or seriously injured.^[1]

Infrastructure

The line is double track throughout, and controlled by automatic block signalling. It has numerous level crossings and many grade-separated road and rail bridges. Terminating facilities are at Kensington, Newmarket (by shunting onto the Flemington Racecourse line), Essendon, Broadmeadows and Craigieburn. Only Essendon, Broadmeadows, and Craigieburn are normally used, the latter two daily and Essendon in special circumstances. Train stabling is at Broadmeadows and Craigieburn.

History

H 220 leads the Albury Express out of Melbourne, past the signal box at Essendon, circa 1949. (Victorian Railways photograph)

The line from North Melbourne to Essendon was opened by the Melbourne and Essendon Railway Company in November 1860. Soon after, the company opened a branch from Newmarket to Flemington Racecourse. Both lines closed after only a short time, in July 1864. The Victorian Railways reopened the Flemington Racecourse line (including the Essendon line as far as Newmarket) in November 1867, and in January 1871 to Essendon.

In April 1872, the line was extended to a temporary terminus outside Seymour, awaiting completion of a bridge over the Goulburn River. In December 1894, through services were provided from Essendon to Brighton Beach on the Sandringham line.

Automatic Block Signalling started to appear on the line in 1918, with Kensington to Essendon being converted in June of that year, and North Melbourne to Kensington in October. In May 1919, Flinders Street to Essendon and the Sandringham line were the first lines to be electrified in Melbourne, apart from a test installation on the Flemington Racecourse line.

In January 1924, an extra pair of tracks, including a flying junction, opened between North Melbourne and Kensington, enabling the separation of passenger and goods traffic in the busy section. Further works were carried out in 1929, when the double track Albion - Jacana freight line was opened,^[2] permitting freight trains to avoid the line via Essendon. Automatic Block Signalling was extended to Broadmeadows in November 1965.

On 30 September 2007 electrification was extended from Broadmeadows to Craigieburn.^[3] Previously, passengers for Craigieburn travelled on V/Line diesel services, but Metcards were accepted.

Proposals

Brick buildings at Kensington

The line near Ascot Vale

V/Line Sprinter near Roxburgh Park

Terminus of the line at Craigieburn

As mentioned in the Network Development Plan, the Craigieburn line will eventually link up with the Frankston line (potentially Baxter line) to form one long through-routed line. This line would avoid Southern Cross and Flinders Street, instead travelling via North Melbourne, Flagstaff, Melbourne Central, Parliament and Richmond through a modified tunnel. In the shorter term, two level crossing removals have been announced along the line, the first of which at Buckley Street in Essendon will be completed by 2019. The second will be completed in Glenroy at Glenroy Road before 2022.^[6]

References

External links

• Timetables
• Statistics and detailed schematic map at the vicsig enthusiast website