List of 7400-series integrated circuits

The following is a list of 7400-series digital logic integrated circuits. The original 7400-series integrated circuits were made by Texas Instruments with the prefix "SN" to create the name SN74xx. Due to the popularity of these parts, other manufacturers have released pin-to-pin compatible devices which kept the 7400 sequence number as an aid to identification of compatible parts. However, different manufacturers will use different prefixes or no prefix at all.

Overview

Some TTL logic parts were made with an extended military-specification temperature range. These parts are prefixed with 54 instead of 74 in the part number. A short-lived 64 prefix on Texas Instruments parts indicated an industrial temperature range; this prefix had been dropped from the TI literature by 1973. Most recent 7400 series parts are fabricated in CMOS or BiCMOS technology rather than TTL. Surface mount parts with a single gate (often in a 5-pin or 6-pin package) are prefixed with 741G instead of 74.

Some manufacturers released some 4000-series equivalent CMOS circuits with a 74 prefix, for example the 74HC4066 was a replacement for the 4066 with slightly different electrical characteristics (different power supply voltage ratings, higher frequency capabilities, lower "on" resistances in analog switches, etc.). See List of 4000-series integrated circuits. Conversely, the 4000-series has "borrowed" from the 7400 series - such as the CD40193 and CD40161 being pin-for-pin functional replacements for 74C193 and 74C161.

Older TTL parts made by manufacturers such as Signetics, Motorola, Mullard and Siemens may have different numeric prefix and numbering series entirely, such as in the European FJ family FJH101 is an 8-input NAND gate like a 7430.

A few alphabetic characters to designate a specific logic subfamily may immediately follow the 74 or 54 in the part number, e.g., 74LS74 for Low-power Schottky. Some CMOS parts such as 74HCT74 for High-speed CMOS with TTL-compatible input thresholds are functionally similar to the TTL part. Not all functions are available in all families.

In a few instances, such as the 7478 and 74107, the same suffix in different families do not have completely equivalent logic functions.

Another extension to the series is the 7416xxx variant, representing mostly the 16-bit wide counterpart of otherwise 8-bit-wide "base" chips with the same three ending digits. Thus e.g. a "7416373" would be the 16-bit-wide equivalent of a "74373". Some 7416xxx parts, however, do not have a direct counterpart from the standard 74xxx range but deliver new functionality instead, which needs making use of the 7416xxx series' higher pin count. For more details, refer primarily to the Texas Instruments documentation mentioned in the References section.

For CMOS (AC, HC, etc.) subfamilies, read "open drain" for "open collector" in the table below.

There are a few numeric suffixes that have multiple conflicting assignments, such as the 74453.

Larger footprints

Parts in this section have a pin count of 14 pins or more. The lower part numbers were established in the 1960s and 1970s, then higher part numbers were added incrementally over decades. IC manufacturers continue to make a core subset of this group, but many of these part numbers are considered obsolete and no longer manufactured. Older discontinued parts may be available from a limited number of sellers as new old stock (NOS), though some are much harder to find.

For the following table:

• Part number column - the "x" is a place holder for the logic subfamily name. For example, 74x00 in "LS" logic family would be "74LS00".
• Description column - the terms schmitt-trigger, open-collector/open-drain, three-state were moved to the input and output columns to make it easier to sort by those features.
• Input column - a blank cell means a normal input for the logic family type.
• Output column - a blank cell means a 'totem pole' output, also known as a push–pull output, with the ability to drive ten standard inputs of the same logic subfamily (fan-out N_O=10). Outputs with higher output currents are often called drivers or buffers.
• Pins column - number of pins for the dual in-line package version; a number in brackets indicates that there is no known dual in-line package version of this IC