Linear motor

In this design the rate of movement of the magnetic field is controlled, usually electronically, to track the motion of the rotor. For cost reasons synchronous linear motors rarely use commutators, so the rotor often contains permanent magnets, or soft iron. Examples include coilguns and the motors used on some maglev systems, as well as many other linear motors.

A typical 3 phase linear induction motor. An aluminium plate on top often forms the secondary "rotor".

In this design, the force is produced by a moving linear magnetic field acting on conductors in the field. Any conductor, be it a loop, a coil or simply a piece of plate metal, that is placed in this field will have eddy currents induced in it thus creating an opposing magnetic field, in accordance with Lenz's law.[1] The two opposing fields will repel each other, thus creating motion as the magnetic field sweeps through the metal.

Railgun schematic

In this design a large current is passed through a metal sabot across sliding contacts that are fed from two rails. The magnetic field this generates causes the metal to be projected along the rails.

Piezoelectric motor action

Piezoelectric drive is often used to drive small linear motors.

The history of linear electric motors can be traced back at least as far as the 1840s, to the work of Charles Wheatstone at King's College in London,[2] but Wheatstone's model was too inefficient to be practical. A feasible linear induction motor is described in the U.S. Patent 782,312 (1905 - inventor Alfred Zehden of Frankfurt-am-Main), for driving trains or lifts. The German engineer Hermann Kemper built a working model in 1935.[3] In the late 1940s, Dr. Eric Laithwaite of Manchester University, later Professor of Heavy Electrical Engineering at Imperial College in London developed the first full-size working model. In a single sided version the magnetic repulsion forces the conductor away from the stator, levitating it, and carrying it along in the direction of the moving magnetic field. He called the later versions of it magnetic river.

A linear motor for trains running Toei Oedo line

Because of these properties, linear motors are often used in maglev propulsion, as in the Japanese Linimo magnetic levitation train line near Nagoya. However, linear motors have been used independently of magnetic levitation, as in Bombardier's Advanced Rapid Transit systems worldwide and a number of modern Japanese subways, including Tokyo's Toei Oedo Line.

Similar technology is also used in some roller coasters with modifications but, at present, is still impractical on street running trams, although this, in theory, could be done by burying it in a slotted conduit.

Outside of public transportation, vertical linear motors have been proposed as lifting mechanisms in deep mines, and the use of linear motors is growing in motion control applications. They are also often used on sliding doors, such as those of low floor trams such as the Citadis and the Eurotram. Dual axis linear motors also exist. These specialized devices have been used to provide direct X-Y motion for precision laser cutting of cloth and sheet metal, automated drafting, and cable forming. Most linear motors in use are LIM (linear induction motor), or LSM (linear synchronous motor). Linear DC motors are not used due to higher cost and linear SRM suffers from poor thrust. So for long run in traction LIM is mostly preferred and for short run LSM is mostly preferred.

Close-up of the flat passive conductor surface of a motion control Sawyer motor

High-acceleration linear motors have been suggested for a number of uses. They have been considered for use as weapons, since current armour-piercing ammunition tends to consist of small rounds with very high kinetic energy, for which just such motors are suitable. Many amusement park launched roller coasters now use linear induction motors to propel the train at a high speed, as an alternative to using a lift hill. The United States Navy is also using linear induction motors in the Electromagnetic Aircraft Launch System that will replace traditional steam catapults on future aircraft carriers. They have also been suggested for use in spacecraft propulsion. In this context they are usually called mass drivers. The simplest way to use mass drivers for spacecraft propulsion would be to build a large mass driver that can accelerate cargo up to escape velocity, though RLV launch assist like StarTram to low earth orbit has also been investigated.

High-acceleration linear motors are difficult to design for a number of reasons. They require large amounts of energy in very short periods of time. One rocket launcher design[4] calls for 300 GJ for each launch in the space of less than a second. Normal electrical generators are not designed for this kind of load, but short-term electrical energy storage methods can be used. Capacitors are bulky and expensive but can supply large amounts of energy quickly. Homopolar generators can be used to convert the kinetic energy of a flywheel into electric energy very rapidly. High-acceleration linear motors also require very strong magnetic fields; in fact, the magnetic fields are often too strong to permit the use of superconductors. However, with careful design, this need not be a major problem.[5]

Two different basic designs have been invented for high-acceleration linear motors: railguns and coilguns.

All of the following applications are in rapid transit and have the active part of the motor in the cars.[7][8]

Originally developed in the late 1970s by UTDC in Canada as the Intermediate Capacity Transit System (ICTS). A test track was constructed in Millhaven, Ontario, for extensive testing of prototype cars, after which three lines were constructed:

• Line 3 Scarborough in Toronto (opened 1985)[9]
• Expo Line of the Vancouver SkyTrain (opened 1985 and extended in 1994)
• Detroit People Mover in Detroit (opened 1987)

ICTS was sold to Bombardier Transportation in 1991 and later known as Advanced Rapid Transit (ART) before adopting its current branding in 2011. Since then, several more installations have been made:

• Kelana Jaya Line in Kuala Lumpur (opened 1998 and extended in 2016)
• Millennium Line of the Vancouver SkyTrain (opened 2002 and extended in 2016)
• AirTrain JFK in New York (opened 2003)
• Airport Express (Beijing Subway) (opened 2008)
• Everline in Yongin, South Korea (opened 2013)

All Innovia Metro systems use third rail electrification.

One of the biggest challenges faced by Japanese railway engineers in the 1970s to the 1980s was the ever increasing construction costs of subways. In response, the Japan Subway Association began studying on the feasibility of the "mini-metro" for meeting urban traffic demand in 1979. In 1981, the Japan Railway Engineering Association studied on the use of linear induction motors for such small-profile subways and by 1984 was investigating on the practical applications of linear motors for urban rail with the Japanese Ministry of Land, Infrastructure, Transport and Tourism. In 1988, a successful demonstration was made with the Limtrain at Saitama and influenced the eventual adoption of the linear motor for the Nagahori Tsurumi-ryokuchi Line in Osaka and Toei Line 12 (present-day Toei Oedo Line) in Tokyo.[10]

To date, the following subway lines in Japan use linear motors and use overhead lines for power collection:

• Two Osaka Metro lines in Osaka:
  • Nagahori Tsurumi-ryokuchi Line (opened 1990)
  • Imazatosuji Line (opened 2006)
• Toei Ōedo Line in Tokyo (opened 2000)
• Kaigan Line of the Kobe Municipal Subway (opened 2001)
• Nanakuma Line of the Fukuoka City Subway (opened 2005)
• Yokohama Municipal Subway Green Line (opened 2008)
• Sendai Subway Tōzai Line (opened 2015)

In addition, Kawasaki Heavy Industries has also exported the Linear Metro to the Guangzhou Metro in China;[11] all of the Linear Metro lines in Guangzhou use third rail electrification:

• Line 4 (opened 2005)
• Line 5 (opened 2009).
• Line 6 (opened 2013)

• There is at least one known monorail system which is not magnetically levitated, but nonetheless uses linear motors. This is the Moscow Monorail. Originally, traditional motors and wheels were to be used. However, it was discovered during test runs that the proposed motors and wheels would fail to provide adequate traction under some conditions, for example, when ice appeared on the rail. Hence, wheels are still used, but the trains use linear motors to accelerate and slow down. This is possibly the only use of such a combination, due to the lack of such requirements for other train systems.
• The TELMAGV is a prototype of a monorail system that is also not magnetically levitated but uses linear motors.

The Birmingham International Maglev shuttle

• High-speed trains:
  • Transrapid: first commercial use in Shanghai (opened in 2004)
  • SCMaglev, under construction in Japan (fastest train in the world, planned to open by 2027)
• Rapid transit:
  • Birmingham Airport, UK (opened 1984, closed 1995)
  • M-Bahn in Berlin, Germany (opened in 1989, closed in 1991)
  • Daejeon EXPO, Korea (ran only 1993)[12]
  • HSST: Linimo line in Aichi Prefecture, Japan (opened 2005)
  • Incheon Airport Maglev (opened July 2014)
  • Changsha Maglev Express (opened 2016)
  • S1 line of Beijing Subway (opened 2017)

There are many roller coasters throughout the world that use LIMs to accelerate the ride vehicles. The first being Flight of Fear at Kings Island and Kings Dominion, both opening in 1996.

• Electromagnetic Aircraft Launch System

• Launch loop – A proposed system for launching vehicles into space using a linear motor powered loop
• StarTram – Concept for a linear motor on extreme scale
• Tether cable catapult system
• Aérotrain S44 – A suburban commuter hovertrain prototype
• Research Test Vehicle 31 – A hovercraft-type vehicle guided by a track
• Hyperloop – a conceptual high-speed transportation system put forward by entrepreneur Elon Musk
• Elevator "ThyssenKrupp Elevator: ThyssenKrupp develops the world's first rope-free elevator system to enable the building industry face the challenges of global urbanization:". Archived from the original on 2016-03-03. Retrieved 2015-06-02.
• Lift "Technology: Linear Synchronous Motor Elevators Become a Reality". Archived from the original on 2015-03-30. Retrieved 2015-06-02.