Oldest railroads in North America

This Gilded Age train station sits at the summit terminus of what was arguably the most important nine miles of railroad in the United States in the 1830s: the Mauch Chunk & Summit Hill Railroad, later the Mauch Chunk Switchback Railway. The Victorian building replaced the original offices, one of the first train stations to host travelers. The first documented passenger traffic arrived in the later half of 1827 when the area and down to Mauch Chunk was billed as "The Switzerland of America"; regular passenger trains brought urban tourists from 1829 until early 1932.

This is a list of the earliest railroads in North America, including various railroad-like precursors to the general modern form of a company or government agency operating locomotive-drawn trains on metal tracks.

Railroad-like entities (1700s–1810s)

• 1720: A railroad is reportedly used in the construction of the French fortress at Louisburg, Nova Scotia.^[1]
• 1764: Between 1762 and 1764, at the close of the French and Indian War, a gravity railroad (mechanized tramway) (Montresor's Tramway) is built by British military engineers up the steep riverside terrain near the Niagara River waterfall's escarpment at the Niagara Portage (which the local Senecas called "Crawl on All Fours.") in Lewiston, New York.^[2] Before the British conquest, under French control the portage had employed nearly 200 Seneca porters. However, once the British took control of the area, they installed a cable railway using sledges (heavy sleds without wheels) to hold the track between the rails. The sleds were capable of carrying 12 to 14 barrels at a time (a serious weight capacity even if only small shoulder-hoistable/mule-compatible keg-sized barrels, taken along with its longevity) indicating that it was a funicular design with two tracks. With barrels as the primary Up load's configuration and they also provided a ready-made counterweight with addition of sufficient Niagara River water as the likely mass used to adjust the lifting force. Designed by Captain John Montresor, the new railway replaced manual labor performed by the Seneca and touched off what might be the first labor rebellion in North America when the Seneca became unemployed; in September 1763, the Senecas revolted and killed many British soldiers and workers in what is called the Devil's Hole Massacre. The tramway was in use until the early 1800s^[3]
• 1799–1805:^{[lower-alpha 1]} Boston developers begin to reduce the height of Mount Vernon before building streets and homes. Silas Whitney constructs a gravity railroad to move excavated material down the hill to fill marshy areas to create new land from the Back Bay.^[4] Frederick C. Gamst, a professor of anthropology at the University of Massachusetts, believes this to be the same railroad equipment as used by Bulfinch on his Beacon Hill railway, given the relations of both men to the land speculation syndicate.^[5]
• 1811: George Magers designs and builds a one-mile (1.6 km) wooden gravity railroad between a gunpowder mill and its powder storage bunker at Falling's Creek, Virginia.^[6]
• 1815: New Jersey grants a charter on February 6, 1815, for a company to "erect a rail-road from the river Delaware near Trenton, to the river Raritan, at or near New Brunswick"—that is to connect the waterports so boats could ferry riders the last distance connecting Philadelphia & Trenton to (19th-century) New York City and Brooklyn & Queens on Long Island via New York Harbor, as proposed by inventor and railway builder John Stevens (1749–1838). This New Jersey Railroad Company is the first passenger carrier railroad chartered in the United States, but fails to attract investors and is never built. Its rights would be passed to the Camden and Amboy Railroad (below) chartered in 1830 also having Stevens as president.
• 1816: A railroad is reportedly used at Kiskiminetas Creek, Pennsylvania.^[7]
• 1818: An iron-smelting furnace at Bear Creek, Armstrong County, Pennsylvania, reportedly has a wooden railroad in operation.^[7]

Early railroad companies (1820s–1830s)

Granite, coal and cotton railroads

Historical Marker of the Mohawk and Hudson Railroad, incorporated in 1826 and opened in 1831.

U.S. railroads in 1835.

• 1826: The Granite Railway in Massachusetts was incorporated by Thomas Handasyd Perkins and Gridley Bryant. Construction began on April 1, and operations began on October 7.^[8] It later became a branch of the Old Colony and Newport Railway, which was later absorbed into the New York, New Haven and Hartford Railroad. This is often called the first commercial railroad in the U.S., as it was the first to evolve into a common carrier without an intervening closure. See the 1810 Leiper Railroad for comparison.
• 1826: On April 9, the Mohawk and Hudson Railroad was incorporated as the first railroad chartered in New York State^[9] (marker pictured), and the first railroad in the United States designed to be powered by a locomotive engine as opposed to horse-drawn or gravity railroads. It opened on August 9, 1831 using steam locomotive deWitt Clinton.
• 1827: The Summit Hill and Mauch Chunk Railroad, often just called The Switchback or the Mauch Chunk Switchback Railroad, Pennsylvania's first railroad and first anthracite carrier^[10] initially a 9-mile (14 km) gravity railroad with animal powered return of cars, is built between Summit Hill^[11] and Mauch Chunk (now Jim Thorpe), Pennsylvania^[12] when rails are laid on top of the existing mule-haul road graded to be nearly uniform in grade from its establishment in 1819-20.^[13] Designed by founder Josiah White^[14] to drop evenly over its length^[15][16] and superintended in both evolutions by founder Erskine Hazard of the Lehigh Coal & Navigation Company, the railway—as the world's first roller coaster, also became a famous tourist attraction—as were leisure cruises on the companies Lehigh Canal. The road carried cargo as a common carrier back up to Summit Hill almost from the start, but by 1829 the new railed road was carrying passengers flocking out from Philadelphia to enjoy its attractions. It was built to haul anthracite coal from the mines to the Lehigh Canal on the Lehigh River and was the first railroad of this type.
• 1829: On August 8, the Delaware and Hudson Canal Company's gravity railroad in northeast Pennsylvania opened using Stourbridge Lion, the first locomotive to run on rails in the United States.^[17] It was also a coal railroad. The canal company, chartered in 1823, called itself "America's oldest continually operated transportation company".
• 1829: The South Carolina Canal and Rail Road Company was chartered December 19, 1827 and was also known as the Charleston & Hamburg Road. An experimental track was installed in February, 1829 to haul bales of cotton in downtown Charleston, South Carolina. On April 1, 1830 a double tracked 3,800-foot (1,200 m) long railroad was in full operation. By 1833, this railroad had been completed to Hamburg, South Carolina for a total length of 137 miles (220 km). At that time, it was the longest railroad in the world. This was the first railroad to use steam locomotives regularly. It later became part of the Southern Railway, now part of Norfolk Southern.^[18]
• 1829: The Mill Creek & Mine Hill Navigation & Railroad Company was chartered on February 7, 1828. The 4.09-mile (6.58 km) main line from Palo Alto, Pennsylvania to Wolf Creek was completed in 1829 with branches added in 1829 and 1830 for a total of 8.29 miles (13.34 km).^[19] It was another coal hauling railroad.
• 1830: The Schuylkill Valley Railroad & Navigation Company was chartered on April 14, 1828. It ran 9.23 miles (14.85 km) from Port Carbon, Pennsylvania to Tuscarora and was completed in 1830.^[20] It was built to carry coal from mines to Port Carbon.
• 1830: The Union Canal Company Railroad was a 3.5-mile (5.6 km) railroad constructed by the Union Canal (Pennsylvania) Company and was chartered on March 3, 1826. The company was in the canal business, but due to the topography, they could not extend their canal to the coal fields north of Pine Grove, Pennsylvania. Their solution was to build this short coal hauling railroad which was completed in 1830.^[17]
• 1830: The Little Schuylkill Navigation, Railroad and Coal Company was chartered on February 28, 1826. The LSRR operated between Tamaqua, Pennsylvania and Port Clinton beginning in 1831 using horse-drawn cars. Two steam locomotives were acquired by the railroad in 1833, but the wooden tracks did not support the engines. Iron "T" rails replaced the wooden ones in 1845, and the locomotives were then returned to regular service. It completed a junction with the Catawissa Railroad at Tamanend (also called Little Schuylkill Junction) in 1854. In 1857 the LSRR built a roundhouse in Tamaqua, housing 21 locomotives and a turntable. In 1863 the company was leased by the Reading Railroad for 93 years. It formally merged with the Reading in 1952.
• 1830: The Tuscumbia Railway was chartered on January 16, 1830 and proceeded to build a 2.1-mile (3.4 km) railroad from downtown Tuscumbia, Alabama to the docks on the Tennessee River west of Sheffield. This was the first railroad chartered/constructed west of the Appalachian Mountains. In 1832, this railroad was renamed the Tuscumbia, Courtland and Decatur Railroad, and was extended 41.9 miles (67.4 km) to connect the two Alabama cities of Tuscumbia and Decatur.^[21]
• 1831: The Mount Carbon Railroad was completed in 1831 running from Mount Carbon, Pennsylvania through Pottsville where it split into two branches, one going to what is now Seltzer and the other to the current Wadesville. This was a coal hauling railroad, 6.26 miles (10.07 km) in length.^[22]
• 1831: The Mine Hill and Schuylkill Haven Railroad completed the first part of its railroad from Schuylkill Haven, Pennsylvania to Minersville with a branch line up the West Branch of the Schuylkill River, a distance of 13.5 miles (21.7 km).^[23]
• 1831: The Room Run Railroad was completed along the path of an unsuccessful gravity road, running a distance 5.26 miles (8.47 km) from Nesquehoning to the Lehigh Canal loading docks at Mauch Chunk, Pennsylvania.^[24]
• 1831: The Chesterfield Railroad (sometimes called the Manchester Railroad) began operations by September 1831 in Chesterfield County, Virginia.^[24]
• 1839: Albion Railway serving coal mines around Stellarton, Nova Scotia, first railway in Canada is use iron rails and run year-round, home of Samson, the oldest surviving locomotive in Canada.

Early common carriers (1820s–1830s)

While private railroads are legally free to choose their jobs and customers, common carriers must charge fair rates to all comers.

Any effort to arrange early common-carrier railroads in chronological order must choose among various possible criterion dates, including applying for a state charter, receiving a charter, forming a company to build a railroad, beginning construction, opening operations, and so forth.

New Orleans & Carrollton Rail-Road in 1835

Selected railroads chartered since 1832:

• 1835: The New Orleans and Carrollton Railroad begins operation after 4 years of work; rail route still in operation as the St. Charles Streetcar Line in New Orleans.
• 1836: The Lake Wimico and St. Joseph Canal and Railroad Company was the first steam railroad in Florida, opening on September 5.
• 1836: The Champlain and St. Lawrence Railroad opens in Quebec, Canada.
• 1838: The Northern Cross Railroad in Central Illinois, part of which still operates under the Norfolk Southern Railway.

Tunnels and bridges

The expanded Park Avenue Tunnel in 1941

• 1829: Carrollton Viaduct built of stone for Baltimore & Ohio Railroad, 312 ft (95 m) over Gwynns Falls River in Baltimore MD
• 1833 (June): The Staple Bend Tunnel, the first railroad tunnel in the U.S., completed in June 1833 as part of the Allegheny Portage Railroad which opened in March 1834. Trains stopped running through the Staple Bend Tunnel in 1857, and it is now part of the Allegheny Portage Railroad National Historic Site.^[25]
• 1833 (December): Wadesville Tunnel, built by Danville and Pottsville Railroad at Wadesville, Pennsylvania.^[26]
• 1835: Thomas Viaduct built of stone for Baltimore & Ohio Railroad, 614 ft (187 m) over Patapsco River in Relay, MD
• 1835: Canton Viaduct built of stone for Boston & Providence Railroad, 615 ft (187 m), over Canton River in Canton, MA
• 1837: The Yorkville Tunnel opened on October 26, for the New York and Harlem Railroad. It was absorbed in the 1870s by the longer and wider Park Avenue Tunnel, and is used by all Metro-North Railroad commuter trains. The old tunnel carries the two center tracks, and two new tunnels carry outer tracks.
• 1837: The Taft Tunnel opened in 1837 for Norwich and Worcester Railroad in Lisbon, Connecticut, north of Norwich, Connecticut. This is the oldest tunnel still in use in its original form in the U.S.
• 1837: The Howard Tunnel in York County, Pennsylvania. Considered the second-oldest tunnel still in use in its original form in the U.S.
• 1842: The Potomac Creek Bridge, 400 ft (120 m) long, was built across the Potomac Creek in Stafford County, Virginia.
• 1848: Starrucca Viaduct built of stone for Erie Railroad, 1,040 ft (320 m) over Starrucca Creek in Lanesboro, PA
• 1850: The Henryton Tunnel on the Baltimore and Ohio Railroad.
• 1850: The Chetoogeta Mountain Tunnel on the Western and Atlantic Railroad, Tunnel Hill, Georgia. 1,477 feet long and the first major railroad tunnel in the south.
• 1856: The Blue Ridge Tunnel, 4,263 ft (1,299 m), considered a world marvel of engineering when opened.
• 1872: The Hauto Tunnel, 3,800 ft (1,200 m), enabled a saving of over 14.5 miles (23.3 km), most (12.5 miles (20.1 km)) mountainous climbing miles of the former Nesquehoning & Mahanoy Railroad for the several millions of tons/anum of anthracite shipped by the Lehigh Coal & Navigation Company from their Lansford and Coaldale breakers in the Panther Creek Valley.^[27] The tunnel allowed retirement and conversion of the famous Switchback Railroad (the Summit Hill & Mauch Chunk Railroad) into a tourism-only railroad owned by the Mauch Chunk, Summit Hill Switch-Back Railway Company^[28]

West of the Mississippi River

• 1841: The Red River Railroad between Alexandria and Cheneyville in Louisiana was operational by 1841.^[29]
• 1852: The first section of the Pacific Railroad, later part of the Missouri Pacific Railroad, opened near St. Louis, Missouri.

Essay

Before we can list railroads, we must understand what consisted a railway as an emerging technology. Understanding today's mature industry technology cannot suffice to see the past in its proper context clearly; to appreciate the explosive progress, one almost need join a track gang as a 'gandy dancer' and 'lay-hold heave' within a team replacing a cracked rail or two.

A skewed perspective can only be achieved were a party to only consider railroads famous for passenger traffic as of importance. By and large, for operations management, carriage of passengers was by far, most often, a minor concern relative to the planning for actual business revenues of a railway creating profits for owners. Nearly every business depended on large multiples that return a modest regular return rather than a competitive edge such a monopoly situation.

Only by understanding that there was the influence of the press on the writing of history, and the widely held snobbery-induced belief that the keeping of such well traveled managers experiences happy-faced with the brand's passenger system would strongly influence his purchasing and decision making – resulting thus also in his scheduling of his company's freight on the freight carrier side together with wide-ranging campaigns that promoted passenger services onto a pedestal can we counteract the false romantic influences of decades of railway advertising campaigns. Early passenger accommodations were spartan, and then only slowly improved as most lines were de facto monopolies locally and could do whatever riders would put up with. Accordingly, general passenger services only slowly became uniform, what we'd consider to be coach class, and the great famous runs of named passenger expresses were comfortably in the future as railroads entered their middle years. Such catering to luxury travelers would occur, but only in response to feeling a competitive pinch, or to assert one. They did not rule on most trunk, much less branch lines, nor for normal inter-city travelers, but were marketed and aimed at the well to do. No doubt the luxury traveler paid his own way, but they also demanded vast increases in additional train crew and station staff to act as cooks, cleaners, bartenders, stewards, janitors, porters, not to mention expensive car maintenance costs, and the need for mail room staff to walk and feed pets.

Together these behaviors and the in-your-face presence bent and magnified the importance in economics and historically those services often generating only marginal profits into an importance and a larger piece of the railroad's revenue streams than is warranted. An important distinction here is made between the sometimes risky peaks and valleys suffered by hosting and advertising a premiere long haul passenger service and that of making a predictable steady revenue stream from reliable everyday commuter operations, the later of which were oft backstopped by freight revenues along the daily runs of mixed trains. Many a branch line and shortline stayed in business because of a mail contract. When such contracts were transferred to Airlines, the passenger services required of Class I & Class II Railroads by 1900–1920s anti-trust legislation gradually dragged most of the American rail industry into bankruptcy, resulting in bailouts and the advent of Conrail in the 1960s.

Technology Historian Frederick C. Gamst^[30] writes in 2014 in "The Transfer of Pioneering British Railroad Technology to North America":^[30]

What Is a Railroad?

Sometimes an old line of rails is dismissed in an unreflective manner as not being a railroad, and is, then, labeled 'only a tramway'. Accordingly, any discussion of railroad genesis must first reflect on the underlying question: What is a railroad? Using a core definition grounded in my research on present-day technological forms and functions, a railroad can be defined as an overland right-of-way bearing self-guided vehicles, which obtain support and guidance from wheels on rails. The guide way, or fixed path, consists of paired rails. These are elevated out of much of any debris strewn upon the way and the results of inclement weather. Self-guidance is accomplished by a flange, either on the vehicular wheels or supporting rails, usually the former. A hard wheel tread on a hard rail surface offers less friction and resistance than in ordinary vehicles on common roads. Not germane to the functional definition of a particular line of rails, and hence to questions of its classification as a railroad, are: the source of motive power, kind of material for rails and supporting ties (sleepers), varieties of things transported, or classification under law as a private or public carrier. From their modern English beginnings about 1600, all railroads are on one evolutionary continuum. Neither technological nor operational discontinuities exist regarding the devices and structures found on the steadily developing railroads.

— Frederick C. Gamst, University of Massachusetts, Boston, Central Pacific Railroad Photographic History Museum^[30]

This definition is minimal and purely functional. Prestige concerns do not make up any of its criteria. Accordingly, many an industrial project, some ephemeral and temporary had used and built railways that are not widely remembered or known by their important influence and effects in early times and which often extend through today. The list of railways here meet that test and more. They are largely and mostly chartered as common carrier enterprises, if chartered (at all) by a legislature after the early days. If wholly on private lands, they need not be chartered at all in many states, and would not be common carriers, but nowadays, even private ones are subject to some oversight—by the local building inspectorate and land regulators and the Interstate Commerce Commission and the Bureau of Mines, et cetera. No large business skates past some oversight in today's regulated business climate.

As today, in their formative years, most North American railways were and are in use to overcome the costs of transporting freight from place to place, especially bulk goods such as grains, ores, coal, gravels, and other raw materials such as those fabricated in processes such as steel, aluminum, concrete, etc. or are just bulky and unwieldy such as steel bridge girders, trusses, or timber (and better behaved lumber). Ironically, these are the same products (excepting steel goods) which the brief American Canal Age carried enabling the existence of the industries of necessary scale to be able to build a railroads many components. Without such service, much of the interior would be unproductively stranded without means of getting products in or out to markets. With the advent of the adolescence of the Iron Horse's technologies in the 1850s, the interior of North America away from navigable streams could be and has been settled and exploited.

In 1840, there were 2,800 miles (4,500 km) of usable railroad track in the United States. Two decades later, the mileage had grown to more than 30,000 miles (48,000 km).^[31]

Notes

References

External links

• First Railway (Tramway) Built in America, Lewiston, NY, 1764
• American Railroads; Their Growth and Development by Association of American Railroads (Washington DC, 1956)
• Library of Congress - History of Railroads and Maps
• Railroad History Database
• National Railway Historical Society (NRHS): Historical Almanac of American Railroads - US, Canada, Mexico
• The Case of the Vanishing Locomotive, Robert Thayer, American Heritage, October 1998, Volume 49, Issue 6