British Rail Class 33

BRCW Type 3 British Rail Class 33
British Railways Class 33 D6575 and train at Washford on the West Somerset Railway
Type and origin Power type Diesel-electric Builder Birmingham Railway Carriage and Wagon Company Serial number DEL92–DEL189 (not in order) Build date 1960–1962 Total produced 98
Specifications Configuration: ​  • UIC Bo'Bo'  • Commonwealth Bo-Bo Gauge 4 ft 8 1⁄2 in (1,435 mm) standard gauge Wheel diameter 3 ft 7 in (1.092 m) Minimum curve 4 chains (264.00 ft; 80.47 m) Wheelbase 39 ft 0 in (11.89 m) Length 50 ft 9 in (15.47 m) Width D6500–D6585: 8 ft 10 in (2.69 m) D6586–D6597: 8 ft 1 1⁄2 in (2.5 m) Height 12 ft 8 in (3.86 m) Loco weight 73 long tons (74.2 t; 81.8 short tons) to 77 long tons (78.2 t; 86.2 short tons) Fuel capacity 800 imp gal (3,600 l; 960 US gal) Prime mover Sulzer 8LDA28 Generator DC generator Traction motors DC traction motors Transmission Diesel electric MU working ★ Blue Star, 33/1 SR MU System Train heating Electric Train Heat Train brakes Dual (Air & Vacuum)
Performance figures Maximum speed 85 mph (137 km/h) Power output Engine: 1,550 bhp (1,156 kW) At rail: 1,215 hp (906 kW) Tractive effort Maximum: 45,000 lbf (200 kN) Continuous: 26,000 lbf (116 kN) Brakeforce 35 long tons-force (349 kN)
Career Operators Formerly British Railways Now West Coast Railway Company Class D15/1, D15/2; 15/6, 15/6A; Class 33 Numbers D6500–D6597; later 33001–33065, 33101–33119, 33201–33212 Nicknames Cromptons Axle load class Route availability 6

The British Rail Class 33 also known as the BRCW Type 3 or Crompton is a class of Bo-Bo diesel-electric locomotives ordered in 1957 and built for the Southern Region of British Railways between 1960 and 1962.

A total of 98 Class 33s were built by the Birmingham Railway Carriage and Wagon Company (BRCW) and were known as "Cromptons" after the Crompton Parkinson electrical equipment installed in them.^[1] Like their lower-powered BRCW sisters (BR Classes 26 and 27), their bodywork and cab ends were of all steel construction. They were very similar in appearance to class 26/27 locos, but carried Southern Region two-digit headcode blinds between the cab windows.

The original (1957) number sequence was D6500–D6597.^[2]

Early years

The locomotives began service on the South-Eastern Division of the Southern Region but rapidly spread across the whole Region and many were used much further afield – an example being the weekly Cliffe (Kent) to Uddingston (South Lanarkshire) cement train which they worked as far as York (and occasionally throughout) in pairs.

Only the then new electric train heating was fitted, rather than the ubiquitous steam heating which passenger carriages largely used. Early delivery problems and a shortage of steam locomotives resulted in many Class 24 locomotives being borrowed from the Midland Region and pairs, of 33 + 24, became common on winter passenger services. This resulted in unpopular, complex run-round manoeuvres at termini as Class 24 needed to be coupled inside to provide steam heat. Emergency provisioning of through-piping for steam heat on some examples of class 33 alleviated this somewhat. The Southern Region was unaccustomed to the operational overhead and maintenance associated with the use of class 24 and they rapidly became unpopular. With the advent of modern stock and warmer seasons, they were returned to the Midland Region.

Class 33s today

Most of these locomotives have now been withdrawn from active duty, though three 33025 33029 & 33207 (with one further member 33030 as a spares donor) members are on Passenger services with heritage spot hire rail company West Coast Railway Company, whilst others remain operational on preserved heritage railways.

Sub-classes

There were three variants, later becoming Class 33/0, 33/1 and 33/2.

Class 33/0 – standard locomotives

British Railways Class 33 D6501 runs round the train at Buckfastleigh on the South Devon Railway.

British Rail Class 33/0 No. 33008 at Woking

All 86 of the first delivery were built as standard locomotives. Later with the advent of TOPS these would become class 33/0 and were numbered in the range 33001-33065. Two locomotives did not survive long enough to receive TOPS numbers as they were withdrawn due to damage sustained in accidents.

Push-pull operations

33 118 at Waterloo station London

The mainstay of push-pull operations was the operation over the then un-electrified track from Bournemouth to Weymouth and the service continued like this across three decades. Weymouth trains started at London Waterloo powered by third-rail electric traction via Winchester and Southampton to Bournemouth. The consist was normally twelve cars made up of a powerful 3,200 hp (2,400 kW) 4REP electric multiple unit on the rear with two leading units of un-powered 4TCs. At Bournemouth the train would be divided with the 4REP remaining at the London end of Bournemouth station and the 4TCs hauled onward to Poole and Weymouth by Class 33/1. On the return leg, the locomotive propelled the train back to Bournemouth where it would be attached to a waiting London-bound 4REP and the locomotive detached to await the next Weymouth-bound portion.

The usual configuration was 4TC+4TC+Loco with the locomotive at the country end. Light traffic would result in 4TC+Loco, and in rare operational circumstances 4TC+Loco+4TC was noted. This combination was not preferred, as it led to operational difficulties and inconvenience to waiting passengers who found themselves confronted with the side of the locomotive when their train has drawn to a halt.

The Class 33/1 with one or two 4TC sets (normally with the Class 33/1 at the country end of the train) were also the mainstay of the Waterloo – Salisbury service from their introduction. Platform congestion and the lack of facilities at the very busy Basingstoke station were two of the reasons for class 33/1 operation throughout the route rather than just over the non-electrified section west of Basingstoke..

In later years Weymouth boat trains, conveying passengers between London and the Channel Islands ferry service out of Weymouth, were handed over to push-pull operation. The section of route from Weymouth to the ship terminal at the quay is actually tramway, following (and largely in the middle of) the harbour road. The quay spur did not pass through the station, but diverged westwards at the throat thus it was not possible for boat trains to call at Weymouth station. Boat trains had been made up of conventional coaching stock and the locomotive would run-round its train on arrival at the sea-terminal. The move to push-pull sets on boat trains removed two headaches for the SR:

• The necessity for the run-round at the quay was removed.
• The locomotive swap at Bournemouth (for both up and down trains) was eliminated and services were greatly improved with the removal of the troublesome Class 74 locomotive from the equation.

Although class 73 & 74 electro-diesel locomotives had push-pull capability, they did not have the endurance for longer runs on diesel power – their 600/650HP was not even Type 1 – little more than a high-powered shunter equivalent. The Type 3 power of Class 33/1 with only a 4 or 8 car train was rarely into the recovery margin of a schedule due to load.

Class 33/1 and 4TC combinations were often used to supplement other services and were not just the purview of Bournemouth-Weymouth trains. Services could be rostered for a push-pull set due to stock shortages – the Reading to Basingstoke service (normally a stronghold of DEMU sets) could be relied upon to produce a push-pull set on Sundays. Often, electric rosters would be substituted by class 33/1 + 4TC if the line was de-energised during engineering work. Indeed, push-pull sets were a possibility over the entire range of Southern Region services including inter-regional trains; they were not in-frequent visitors to Bristol Temple Meads station and have been noted at Cardiff.

Although in private ownership at the time, 33103 and 4TC 417 were spot-hired for use on Barking-Gospel Oak services during a stock shortage in 1999 and worked the service for some weeks without issue.

A further member of the class; 33115, was used as a dead-load test before the introduction of Eurostar trains running on Southern tracks into Waterloo, with running number 83301. Having been fitted with Eurostar bogies (complete with electric 3rd rail collector shoes), it formed part of a test train where its through-wiring for push-pull work was necessary for the completion of tests.

Tramway safety

British Rail Class 33/1 No. 33109 arrives at the ferry terminal having negotiated the Weymouth Harbour Tramway, Weymouth, Dorset, on its way to quay during August 1981. Note the bell and beacon warning unit on the cab front and the platform height air brake pipes with two rolled flags wedged behind.

Allocated to work the Weymouth Harbour Tramway, trains operating over public thoroughfare tramway without escort are required to be fitted with warning equipment for the general public. Before its withdrawal, the Class 03 Weymouth pilot would regularly take fuel-oil tank wagons (for the ferries) and occasionally boat-train stock between Weymouth yard and ferry terminal. It had a bell and beacon fitted at both ends above the lower-centre headcode lamp (along with SR style high-level brake pipes) which served to warn thoroughfare users and was controlled from the cab. For main-line stock, two warning units were built and housed in a cabinet at the track side of the quay spur at the throat of the yard. This equipment comprised a yellow control box with amber rotating beacon and bell which fitted on a bracket just above the rubbing plate on the cab front. Class 33/1 and all TC stock were equipped with this bracket and a socket where units plugged-in to draw power from the train systems. This was a specific complexity with the two types and in order to standardize and remove a maintenance risk, in the early 1980s, three battery-powered units were constructed which mounted on a standard lamp bracket with no need to draw power from the train. This allowed the power and control circuitry for warning units to be removed during (and thus simplifying) overhaul. The old power sockets were gradually removed and plated-over but some remained until withdrawal of the stock. These new units also enabled other types of stock to use the tramway. They were smaller, had an on/off switch on the rear of the unit and no bell – warnings being given using the train horn.

Trains for the quay would halt at the station throat, and the warning equipment was attached and tested by the train guard. In addition, trains on the tramway were "walked" by railway staff with flags, clearing the route of people and badly parked cars all the way between the points at which the tramway reverted to conventional track at the quay station and road crossing into Weymouth yard. On arrival at the quay terminus the guard would move the warning equipment to the other end of the train in readiness for the return journey. In later years, (e.g. for Railtours) the local Police fulfil the role of traffic control and the process of moving a train along the tramway has become a lot less routine.

Accidents and incidents

• On 23 March 1960, locomotive D6520 was hauling a freight that was derailed between Burghclere and Highclere, Hampshire.^[6]
• On 5 March 1964, locomotive D6502 was hauling a freight train when it ran through signals at Itchingfield Junction, West Sussex and was in a rear-end collision with a freight train. Two people were killed. Damage was so extensive that the locomotive was cut up on site.^[6]
• On 30 September 1966, locomotive D6535 was hauling a freight train that overran signals and was derailed by trap points at Wallers Ash, Hampshire.^[6]
• In 1968, locomotive D6576 was involved in a collision at Reading, Berkshire. Following recovery to Eastleigh Works and examination, it was considered uneconomical to repair and was cut up for spares.
• On 4 January 1969, locomotive No. D6558 was hauling a parcels train that was run into by a passenger train at Marden, Kent.
• On 28 July 1971, locomotive No. 6561 was hauling a parcels train that was derailed at Guildford, Surrey.^[7]
• In September 1975, locomotive No. 33 041 was involved in an accident in London and was consequently written off.^[8]
• On 11 October 1977, locomotives No. 33 036 and 33 043 were hauling a freight train that was derailed at Mottingham, London. Due to damage sustained, 33 036 was withdrawn from service and scrapped.^[9][10]
• On 25 February 1979, locomotive No. 33 115 was hauling a passenger train which was involved in a collision with an engineers' crane near Hilsea. One person was killed in the accident. 33 115 was out of traffic until 1980.^[11]
• On 26 January 1985, locomotive 33 104 ran into the rear of a passenger train formed of 4VEP units 7754 & 7703 and 4CIG unit 7395 which had been halted by a landslip near Popham, Hampshire. The crew of the passenger train had failed to protect the rear of their train, Twelve people were injured. The locomotive was written off.^[12]
• On 24 March 1987, a freight train overran a signal at Frome North Junction, Somerset. Locomotive No. 33 032 was hauling a passenger train that was in a head-on collision with the freight train (hauled by 47 202). Fifteen people were injured, some seriously.^[13][14]

Preservation

29 examples survived into preservation:^[15]

References

• Marsden, Colin J. (1981). Motive power recognition:1 Locomotives. Shepperton: Ian Allan Ltd. ISBN 0-7110-1109-5.
• Stevens-Stratten, S.W.; Carter, R.S. (1978). British Rail Main-Line Diesels. Shepperton: Ian Allan Ltd. ISBN 0-7110-0617-2.
• Williams, Alan; Percival, David (1977). British Railways Locomotives and Multiple Units including Preserved Locomotives 1977 Combined Volume. Shepperton: Ian Allan Ltd. ISBN 0-7110-0751-9.
• McManus, Michael. Ultimate Allocations, British Railways Locomotives 1948 – 1968. Wirral. Michael McManus.

Further reading

• Cooper, B.K. (1990). Locomotive Profile: Class 33 'Cromptons'. Ian Allan. ISBN 9780711018945. OCLC 24733799.
• Hypher, John (1991). The Class 33's: A Celebration of Thirty Years. Runpast Publishing. ISBN 9781870754194. OCLC 60054445.
• Marsden, Colin (2005). Rail Portfolios: The Cromptons. Ian Allan. ISBN 9780711031029. OCLC 58829151.
• Vaughan, John (2008). Diesel Retrospective:Class 33. Ian Allan. ISBN 9780711032842. OCLC 185031160.
• Kelly, Peter (February 1983). "Workaday wonders". Rail Enthusiast. EMAP National Publications. pp. 4–5, 7–9. ISSN 0262-561X. OCLC 49957965.
• Hypher, John (October 1984). "Cromptons far and wide - Occasionally slim!". Rail Enthusiast. EMAP National Publications. pp. 34–39. ISSN 0262-561X. OCLC 49957965.
• Dunn, Pip (18 June – 1 July 1997). "The small locomotive with the big personality!". RAIL. No. 307. EMAP Apex Publications. pp. 20–25. ISSN 0953-4563. OCLC 49953699.

External links

Wikimedia Commons has media related to British Rail Class 33.

• 71A Group
• Southern E-Group (SEMG) – Class 33 details and photographs
• South East Locomotive Group – owners of 33063 & 33065
• Cromptons – BR Class 33 Locomotives
• Pioneer Diesel Group Owners of 33035