IEC 60228

IEC 60228 is the International Electrotechnical Commission's international standard on conductors of insulated cables. The current version is Third Edition 2004-11 [1] Among other things, it defines a set of standard wire cross-sectional areas:

International standard wire sizes (IEC 60228)
0.5 mm20.75 mm21 mm21.5 mm22.5 mm24 mm2
6 mm210 mm216 mm225 mm235 mm250 mm2
70 mm295 mm2120 mm2150 mm2185 mm2240 mm2
300 mm2400 mm2500 mm2630 mm2800 mm21000 mm2
1200 mm21400 mm2[note 1]1600 mm21800 mm2[note 1]2000 mm22500 mm2

In engineering applications, it is often most convenient to describe a wire in terms of its cross-section area, rather than its diameter, because the cross section is directly proportional to its strength and weight, and inversely proportional to its resistance. The cross-sectional area is also related to the maximum current that a wire can carry safely.

This document is one considered Fundamental in that it does not contain reference to any other standard.

Description

The document describes several aspects of the conductors for electrical cables

Class

This refers to the flexibility of a conductor

  • Class 1: Solid conductor
  • Class 2: Stranded conductor intended for fixed installation
  • Class 5: Flexible conductor
  • Class 6: Very Flexible conductor

Size

The nominal (see below) cross-sectional area for standard conductors including the following:

  • Class 2: Minimum number of strands required to make particular conductor size
  • Class 5&6: Maximum diameter of any component
strand of the conductor

Resistance

The maximum permissible resistance (in ohms/km)of each conductor size, class and type (both plain copper and metal coated)

Purpose of the document

This document and its precursors were created due to a need for a standard definition of cable conductor size. The main problem being that not all copper has the same resistivity value, so, for example, a 4mm2 conductor from two different suppliers may have different resistance values. Instead this document describes conductors by their nominal size, determined by resistance rather than physical dimensions. This is a key distinction as it makes a standardized definition of conductors based solely on their electrical characteristics.

Almost all characteristics of conductors, resistance, current carrying capacity etc. are independent of the physical dimensions of the conductor. However this document allows an easy reference whereby the standard conductor sizes and reference to physical dimensions are maintained but given an exact meaning in terms of the electrical characteristics of a conductor.

Footnotes

  1. 1 2 Non-preferred size

See also

References

  1. ↑ http://webstore.iec.ch/preview/info_iec60228%7Bed3.0%7Den_d.pdf


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.