EN 62262

The European standard EN 62262 — the equivalent of international standard IEC 62262 (2002) — relates to IK ratings. This is an international numeric classification for the degrees of protection provided by enclosures for electrical equipment against external mechanical impacts. It provides a means of specifying the capacity of an enclosure to protect its contents from external impacts. The IK Code was originally defined in European Standard BS EN 50102 (1995, amended 1998). Following its adoption as an international standard in 2002, the European standard was renumbered EN 62262.

Before the advent of the IK code, a third numeral had been occasionally added to the closely related IP Code on ingress protection, to indicate the level of impact protection — e.g. IP66(9). Nonstandard use of this system was one of the factors leading to the development of this standard, which uses a separate two numeral code to distinguish it from the old differing systems. The standard came into effect in October 1995 and conflicting national standards had to be withdrawn by April 1997.

IK ratings help to classify products by its resistance to impacts by Kinetic energy, while EN 62262 specifies the way enclosures should be mounted when tests are carried out, the atmospheric conditions that should prevail, the number of impacts (5) and their (even) distribution, and the size, style, material, dimensions etc. of the various types of hammer designed to produce the energy levels required.

IK code and impact energy (values changed in Amd 1:1998)
IK code IK00 IK01 IK02 IK03 IK04 IK05 IK06 IK07 IK08 IK09 IK10
Impact energy (joule) * 0.14 0.2 0.35 0.5 0.7 1 2 5 10 20
Impact test characteristics
IK code IK00 IK01 to IK05 IK06 IK07 IK08 IK09 IK10
Impact energy (joules) * <1 1 2 5 10 20
R mm (radius of striking element) * 10 10 25 25 50 50
Material * polyamide1 polyamide1 steel2 steel2 steel2 steel2
Mass kg * 0.2 0.5 0.5 1.7 5 5
Pendulum hammer * Yes Yes Yes Yes Yes Yes
Spring hammer * Yes Yes Yes No No No
Free fall hammer * No No Yes Yes Yes Yes

* not protected according to the standard

  1. HR 100 Rockwell hardness according to ISO 2039/2
  2. Fe 490-2 according to ISO 1052, Rockwell hardness HR 50 to HR 58 according to ISO 6508
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.