History of scuba diving

Scuba diver of the late 1960s

The history of scuba diving is closely linked with the history of scuba equipment. By the turn of the twentieth century, two basic architectures for underwater breathing apparatus had been pioneered; open-circuit surface supplied equipment where the diver's exhaled gas is vented directly into the water, and closed-circuit breathing apparatus where the diver's carbon dioxide is filtered from unused oxygen, which is then recirculated. Closed circuit equipment was more easily adapted to scuba in the absence of reliable, portable, and economical high pressure gas storage vessels. By the mid twentieth century, high pressure cylinders were available and two systems for scuba had emerged: open-circuit scuba where the diver's exhaled breath is vented directly into the water, and closed-circuit scuba where the carbon dioxide is removed from the diver's exhaled breath which has oxygen added and is recirculated. Oxygen rebreathers are severely depth limited due to oxygen toxicity risk, which increases with depth, and the available systems for mixed gas rebreathers were fairly bulky and designed for use with diving helmets.[1] The first commercially practical scuba rebreather was designed and built by the diving engineer Henry Fleuss in 1878, while working for Siebe Gorman in London.[2] His self contained breathing apparatus consisted of a rubber mask connected to a breathing bag, with an estimated 50–60% oxygen supplied from a copper tank and carbon dioxide scrubbed by passing it through a bundle of rope yarn soaked in a solution of caustic potash.[2][3] During the 1930s and all through World War II, the British, Italians and Germans developed and extensively used oxygen rebreathers to equip the first frogmen. In the U.S. Major Christian J. Lambertsen invented an underwater free-swimming oxygen rebreather. In 1952 he patented a modification of his apparatus, this time named SCUBA,(an acronym for "self-contained underwater breathing apparatus"),[4][5][6][7] which became the generic English word for autonomous breathing equipment for diving, and later for the activity using the equipment.[8] After World War II, military frogmen continued to use rebreathers since they do not make bubbles which would give away the presence of the divers. The high percentage of oxygen used by these early rebreather systems limited the depth at which they could be used due to the risk of convulsions caused by acute oxygen toxicity.[9]:1–11

Although a working demand regulator system had been invented in 1864 by Auguste Denayrouze and Benoît Rouquayrol,[10] the first open-circuit scuba system developed in 1925 by Yves Le Prieur in France was a manually adjusted free-flow system with a low endurance, which limited the practical usefulness of the system.[11] In 1942, during the German occupation of France, Jacques-Yves Cousteau and Émile Gagnan designed the first successful and safe open-circuit scuba, a twin hose system known as the Aqua-Lung. Their system combined an improved demand regulator with high-pressure air tanks.[12] This was patented in 1945. To sell his regulator in English-speaking countries Cousteau registered the Aqua-Lung trademark, which was first licensed to the U.S. Divers company,[13] and in 1948 to Siebe Gorman of England,[14] Siebe Gorman was allowed to sell in Commonwealth countries, but had difficulty in meeting the demand and the U.S. patent prevented others from making the product. The patent was circumvented by Ted Eldred of Melbourne, Australia, who developed the single-hose open-circuit scuba system, which separates the first stage and demand valve of the pressure regulator by a low-pressure hose, puts the demand valve at the diver's mouth, and releases exhaled gas through the demand valve casing. Eldred sold the first Porpoise Model CA single hose scuba early in 1952.[15]

Early scuba sets were usually provided with a plain harness of shoulder straps and waist belt. Many harnesses did not have a backplate, and the cylinders rested directly against the diver's back.[16] Early scuba divers dived without a buoyancy aid.[17] In an emergency they had to jettison their weights. In the 1960s adjustable buoyancy life jackets (ABLJ) became available, which can be used to compensate for loss of buoyancy at depth due to compression of the neoprene wetsuit and as a lifejacket that will hold an unconscious diver face-upwards at the surface. The first versions were inflated from a small disposable carbon dioxide cylinder, later with a small direct coupled air cylinder. A low-pressure feed from the regulator first-stage to an inflation/deflation valve unit an oral inflation valve and a dump valve lets the volume of the ABLJ be controlled as a buoyancy aid. In 1971 the stabilizer jacket was introduced by ScubaPro. This class of buoyancy aid is known as a buoyancy control device or buoyancy compensator.[18][19] A backplate and wing is an alternative configuration of scuba harness with a buoyancy compensation bladder known as a "wing" mounted behind the diver, sandwiched between the backplate and the cylinder or cylinders. This arrangement became popular with cave divers making long or deep dives, who needed to carry several extra cylinders, as it clears the front and sides of the diver for other equipment to be attached in the region where it is easily accessible.[20][21] Sidemount is a scuba diving equipment configuration which has basic scuba sets, each comprising a single cylinder with a dedicated regulator and pressure gauge, mounted alongside the diver, clipped to the harness below the shoulders and along the hips, instead of on the back of the diver. It originated as a configuration for advanced cave diving, as it facilitates penetration of tight sections of cave as, sets can be easily removed and remounted when necessary. Sidemount diving has grown in popularity within the technical diving community for general decompression diving,[22] and has become a popular specialty for recreational diving.[23][24][25]

In the 1950s the United States Navy (USN) documented procedures for military use of what is now called nitrox,[9] and in 1970, Morgan Wells, of (NOAA) began instituting diving procedures for oxygen-enriched air. In 1979 NOAA published procedures for the scientific use of nitrox in the NOAA Diving Manual.[26][27] In 1985 IAND (International Association of Nitrox Divers) began teaching nitrox use for recreational diving. After initial resistance by some agencies, the use of a single nitrox mixture has become part of recreational diving, and multiple gas mixtures are common in technical diving to reduce overall decompression time.[28] Nitrogen narcosis limits the depth when breathing nitrox mixtures. In 1924 the US Navy started to investigate the possibility of using helium and after animal experiments, human subjects breathing heliox 20/80 (20% oxygen, 80% helium) were successfully decompressed from deep dives,[29] Cave divers started using trimix to allow deeper dives and it was used extensively in the 1987 Wakulla Springs Project and spread to the north-east American wreck diving community.[30] The challenges of deeper dives and longer penetrations and the large amounts of breathing gas necessary for these dive profiles and ready availability of oxygen sensing cells beginning in the late 1980s led to a resurgence of interest in rebreather diving. By accurately measuring the partial pressure of oxygen, it became possible to maintain and accurately monitor a breathable gas mixture in the loop at any depth.[31] In the mid 1990s semi-closed circuit rebreathers became available for the recreational scuba market, followed by closed circuit rebreathers around the turn of the millennium.[32] Rebreathers are currently (2018) manufactured for the military, technical and recreational scuba markets.[31]

Early history

John Lethbridge's diving dress, the first enclosed diving suit, built in the 1710s.

A scuba set is characterized by full independence from the surface during use, by providing breathing gas carried by the diver. Early attempts to reach this autonomy were made in the 18th century by the Englishman John Lethbridge, who invented and successfully built his own underwater diving machine in 1715, but though the air supply was carried in the diving apparatus, it relied on surface tenders to deploy and move around under the water, and was effectively an atmospheric pressure diving bell.

An early diving dress using a compressed air reservoir was designed and built in 1771 by Sieur[33] Fréminet from Paris. He conceived an autonomous breathing machine equipped with a reservoir, dragged behind the diver or mounted on his back.[34][35] Fréminet called his invention machine hydrostatergatique and used it successfully for more than ten years in the harbors of Le Havre and Brest, as stated in the explanatory text of a 1784 painting.[36][37]

Diagram of the diving suit invented by Charles Condert of Brooklyn, N.Y.
  • a. Glass viewport
  • b. Copper pipe bent into arc with closed ends to hold air
  • c. Slings to support air tank
  • d. Valve to let air out as needed
  • e. Pipe to supply air into the suit

The Frenchman Paul Lemaire d'Augerville built and used autonomous diving equipment in 1824,[38] as did the British William H. James in 1825. James' helmet was made of "thin copper or sole of leather" with a plate window, and the air was supplied from an iron reservoir.[39] A similar system was used in 1831 by the American Charles Condert, who died in 1832 while testing his invention in the East River at only 20 feet (6 m) deep.[40] The oldest known oxygen rebreather was patented on June 17, 1808 by Sieur Touboulic from Brest, mechanic in Napoleon's Imperial Navy, but there is no evidence of any prototype having been manufactured. This early rebreather design worked with an oxygen reservoir, the oxygen being delivered progressively by the diver himself and circulating in a closed circuit through a sponge soaked in limewater.[41][42]

After having travelled to England and discovered William James' invention, the French physician Manuel Théodore Guillaumet, from Argentan (Normandy), patented in 1838 the oldest known regulator mechanism. Guillaumet's invention was air-supplied from the surface and was never mass-produced due to problems with safety. The oldest practical rebreather relates to the 1849 patent from the Frenchman Pierre Aimable De Saint Simon Sicard.[43]

First successful scuba equipment

None of those inventions solved the problem of high pressure when compressed air must be supplied to the diver (as in modern regulators); they were mostly based on a constant-flow supply of the air. The compression and storage technology was not advanced enough to allow compressed air to be stored in containers at sufficiently high pressures to allow useful dive times.

By the turn of the twentieth century, two basic templates for a scuba had emerged; open-circuit scuba where the diver's exhaled gas is vented directly into the water, and closed-circuit scuba where the diver's carbon dioxide is filtered from unused oxygen, which is then recirculated.

Open circuit

The Rouquayrol-Denayrouze apparatus was the first regulator to be mass-produced (from 1865 to 1965). In this picture the air reservoir presents its surface-supplied configuration.

These were the first systems that became popular with recreational divers. They were safer than early rebreather systems, less expensive to operate, and allowed dives to greater depths.

An important step for the development of open circuit scuba technology was the invention of the demand regulator, a mechanism that conserves air supply by providing air flow only when the outlet pressure is reduced when the diver inhales. In 1864, the French engineers Auguste Denayrouze and Benoît Rouquayrol designed and patented their "Rouquayrol-Denayrouze diving suit" after adapting a pressure regulator and developing it for underwater use. This would be the first diving suit that could automatically supply air to the diver on demand by adjusting the flow of air from the tank to meet the diver’s breathing and pressure requirements. The system still had to use surface supply to provide useful endurance, as the pressure cylinder provided was only a low capacity accumulator.[10]

The first open-circuit scuba system was devised in 1925 by Yves Le Prieur in France. Inspired by the simple ambient pressure supply valve apparatus of Maurice Fernez and the freedom it allowed the diver, he conceived an idea to make it free of the hose from the surface pump by using Michelin cylinders for the air supply, containing three litres of air compressed to 150 kilograms per square centimetre (2,100 psi; 150 bar). The "Fernez-Le Prieur" diving apparatus was demonstrated at the swimming pool of Tourelles in Paris in 1926. The unit consisted of a cylinder of compressed air carried on the back of the diver, connected to a pressure regulator designed by Le Prieur which was adjusted manually by the diver, with two gauges, one for tank pressure and one for output (supply) pressure. Air was supplied continuously through the mouthpiece and exhausted through a short tube fitted with a valve as in the Fernez design, however, the lack of a demand regulator and the consequent low endurance of the apparatus limited the practical use of LePrieur’s device.[11]

Fernez had previously invented a noseclip, a mouthpiece fitted with a one-way valve for exhalation and diving goggles, and Yves le Prieur just added a manually-controlled regulator and a compressed air cylinder to those three elements. Fernez's goggles did not cover the nose, which allows the diver to equalise the internal pressure by letting air flow into the goggles through the nose, so they did not allow a dive deeper than ten metres due to "mask squeeze". In 1933, Le Prieur replaced all the Fernez equipment (goggles, noseclip and valve) by a full face mask, directly supplied with constant flow air from the cylinder.[11] Le Prieur's design was the first autonomous breathing device used by the first scuba diving clubs in history – Racleurs de fond founded by Glenn Orr in California in 1933, and Club des sous-l'eau founded by Le Prieur himself in Paris in 1935.[44]

In 1942, during the German occupation of France, Jacques-Yves Cousteau and Émile Gagnan designed the first successful and safe open-circuit scuba, known as the Aqua-Lung. Their system combined an improved demand regulator with high-pressure air tanks. Émile Gagnan, an engineer employed by the Air Liquide company, miniaturized and adapted the regulator manufactured for use with gas generators in response to the constant fuel shortage that was a consequence of German requisitioning. Gagnan's boss, Henri Melchior, knew that his son-in-law Jacques-Yves Cousteau was looking for an automatic demand regulator to increase the useful period of the underwater breathing apparatus invented by le Prieur,[12] so he introduced Cousteau to Gagnan in December 1942. On Cousteau's initiative, Gagnan's regulator was adapted to diving, and the new Cousteau-Gagnan patent was registered some weeks later in 1943.[45] In 1957, Eduard Admetlla i Lázaro used a modified version of the Aqua-Lung made by Nemrod and broke the world record by descending to a depth of 100 metres (330 ft).[46]

Closed circuit

Henry Fleuss (1851–1932) improved the rebreather technology.

The alternative concept, developed in roughly the same time frame was closed-circuit scuba. The body normally consumes and metabolises only a small fraction of inhaled oxygen – the situation is even more wasteful of oxygen when the breathing gas is compressed as it is in ambient pressure breathing systems underwater. The rebreather recycles the exhaled breathing gas, while constantly replenishing it from an oxygen-rich supply so that the oxygen level is not depleted. The apparatus also has to remove the exhaled carbon dioxide, as a buildup of CO2 levels would result in respiratory distress and hypercapnia.

The first commercially practical scuba rebreather was designed and built by the diving engineer Henry Fleuss in 1878, while working for Siebe Gorman in London.[2] His self contained breathing apparatus consisted of a rubber mask connected to a breathing bag, with an estimated 50–60% oxygen supplied from a copper tank and carbon dioxide scrubbed by passing it through a bundle of rope yarn soaked in a solution of caustic potash, the system giving a dive duration of up to about three hours. Fleuss tested his device in 1879 by spending an hour submerged in a water tank, then one week later by diving to a depth of 5.5 metres (18 ft) in open water, on which occasion he was slightly injured when his assistants abruptly pulled him to the surface.[2][3] This apparatus was first used under operational conditions in 1880 by Alexander Lambert, the lead diver on the Severn Tunnel construction project, who was able to travel 1,000 feet (300 m) in the darkness to close several submerged sluice doors in the tunnel; this had defeated the best efforts of standard divers due to extremely long distance, along which their air supply hoses became fouled on submerged debris, and the strong water currents in the workings.[2][47]

Fleuss continually improved his apparatus, adding a demand regulator and tanks capable of holding greater amounts of oxygen at higher pressure. Sir Robert Davis, head of Siebe Gorman, improved the oxygen rebreather in 1910[2][3] with his invention of the Davis Submerged Escape Apparatus, the first rebreather to be made in quantity. While intended primarily as an emergency escape apparatus for submarine crews, it was soon also used for diving, being a handy shallow water diving apparatus with a thirty-minute endurance, and as an industrial breathing set.[3]

Davis Submerged Escape Apparatus being tested at the submarine escape test tank at HMS Dolphin, Gosport, 14 December 1942.

The rig comprised a rubber breathing/buoyancy bag containing a canister of barium hydroxide to absorb exhaled carbon dioxide and, in a pocket at the lower end of the bag, a steel pressure cylinder holding approximately 56 litres (2.0 cu ft) of oxygen at a pressure of 120 bars (1,700 psi) which was equipped with a control valve and connected to the breathing bag. Opening the cylinder's valve admitted oxygen to the bag at ambient pressure. The rig also included an emergency buoyancy bag on its front to help keep the wearer afloat. After further development by Davis in 1927 the DSEA was adopted by the Royal Navy.[48]

In 1911 Dräger of Lubeck tested a self-contained rebreather system for standard diving equipment, which used an injector system to circulate the breathing gas through the breathing loop and scrubber. This was put into service soon thereafter and was available in two versions, an oxygen rebreather DM20 for depths shallower than 20m, and a nitrox rebreather DM40 for depths up to 40m.[1]

During the 1930s and all through World War II, the British, Italians and Germans developed and extensively used oxygen rebreathers to equip the first frogmen. The British adapted the Davis Submerged Escape Apparatus and the Germans adapted the Dräger submarine escape rebreathers, for their frogmen during the war.[49]

The Italians developed similar rebreathers for the combat swimmers of the Decima Flottiglia MAS, especially the Pirelli ARO.[50] In the U.S. Major Christian J. Lambertsen invented an underwater free-swimming oxygen rebreather in 1939, which was accepted by the Office of Strategic Services.[51] In 1952 he patented a modification of his apparatus, this time named SCUBA,(an acronym for "self-contained underwater breathing apparatus"),[4][5][6][7] which became the generic English word for autonomous breathing equipment for diving, and later for the activity using the equipment.[8] After World War II, military frogmen continued to use rebreathers since they do not make bubbles which would give away the presence of the divers. The high percentage of oxygen used by these early rebreather systems limited the depth at which they could be used due to the risk of convulsions caused by acute oxygen toxicity.

Post WWII

Mistral twin-hose regulator mounted on a diving cylinder. The regulator comprises the mouthpiece and the regulator body, connected by the supply and exhaust hoses. The regulator is connected to the outlet valve of the high-pressure cylinder.
  1. Hose
  2. Mouthpiece
  3. Valve
  4. Harness
  5. Backplate
  6. Cylinder

Air Liquide started selling the Cousteau-Gagnan regulator commercially in 1946 under the name of scaphandre Cousteau-Gagnan or CG45 ("C" for Cousteau, "G" for Gagnan and 45 for the 1945 patent). The same year Air Liquide created a division called La Spirotechnique, to develop and sell regulators and other diving equipment. To sell his regulator in English-speaking countries Cousteau registered the Aqua-Lung trademark, which was first licensed to the U.S. Divers company.(the American division of Air Liquide) and later sold with La Spirotechnique and U.S. Divers to finally become the name of the company, Aqua-Lung/La Spirotechnique, currently located in Carros, near Nice.[13]

In 1948 the Cousteau-Gagnan patent was also licensed to Siebe Gorman of England,[14] Siebe Gorman was allowed to sell in Commonwealth countries, but had difficulty in meeting the demand and the U.S. patent prevented others from making the product. This patent was circumvented by Ted Eldred of Melbourne, Australia, who had been developing a rebreather called the Porpoise. When a demonstration of this rebreather resulted in a diver passing out, he developed the single-hose open-circuit scuba system, which separates the first stage and demand valve of the pressure regulator by a low-pressure hose, puts the demand valve at the diver's mouth, and releases exhaled gas through the demand valve casing. Eldred sold the first Porpoise Model CA single hose scuba early in 1952.[15]

Early scuba sets were usually provided with a plain harness of shoulder straps and waist belt. The waist belt buckles were usually quick-release, and shoulder straps sometimes had adjustable or quick release buckles. Many harnesses did not have a backplate, and the cylinders rested directly against the diver's back.[16]

Early scuba divers dived without a buoyancy aid.[17] In an emergency they had to jettison their weights. In the 1960s adjustable buoyancy life jackets (ABLJ) became available, which can be used to compensate for loss of buoyancy at depth due to compression of the neoprene wetsuit and as a lifejacket that will hold an unconscious diver face-upwards at the surface, and that can be quickly inflated. The first versions were inflated from a small disposable carbon dioxide cylinder, later with a small direct coupled air cylinder. A low-pressure feed from the regulator first-stage to an inflation/deflation valve unit lets the volume of the ABLJ be controlled as a buoyancy aid. In 1971 the stabilizer jacket was introduced by ScubaPro. This class of buoyancy aid is known as a buoyancy control device or buoyancy compensator.[18][19]

A backplate and wing is an alternative configuration of scuba harness with a buoyancy compensation bladder known as a "wing" mounted behind the diver, sandwiched between the backplate and the cylinder or cylinders. Unlike stabilizer jackets, the backplate and wing is a modular system, in that it consists of separable components. This arrangement became popular with cave divers making long or deep dives, who needed to carry several extra cylinders, as it clears the front and sides of the diver for other equipment to be attached in the region where it is easily accessible. This additional equipment is usually suspended from the harness or carried in pockets on the exposure suit.[20][21]

In 1911 Draeger of Germany tested an injector operated rebreather backpack for a standard diving suit. This concept was produced and marketed as the DM20 oxygen rebreather system and the DM40 nitrox rebreather system, in which air from one cylinder and oxygen from a second cylinder were mixed during injection through a nozzle which circulated the breathing gas through the scrubber and the rest of the loop. The DM40 was rated for depths up to 40m.[1] In the 1950s the United States Navy (USN) documented enriched oxygen gas procedures for military use of what we today call nitrox, in the USN Diving Manual,[9] and in 1970, Morgan Wells, who was the first director of the National Oceanographic and Atmospheric Administration (NOAA) Diving Center, began instituting diving procedures for oxygen-enriched air. In 1979 NOAA published Wells' procedures for the scientific use of nitrox in the NOAA Diving Manual.[26][27] In 1985 Dick Rutkowski, a former NOAA diving safety officer, formed IAND (International Association of Nitrox Divers) and began teaching nitrox use for recreational diving. This was considered dangerous by some, and met with heavy skepticism by the diving community.[52] Nevertheless, in 1992 NAUI became the first existing major recreational diver training agency to sanction nitrox,[53] and eventually, in 1996, the Professional Association of Diving Instructors (PADI) announced full educational support for nitrox.[54] The use of a single nitrox mixture has become part of recreational diving, and multiple gas mixtures are common in technical diving to reduce overall decompression time.[28]

Technical diver during a decompression stop

Technical diving is recreational scuba diving that exceeds the generally accepted recreational limits, and may expose the diver to hazards beyond those normally associated with recreational diving, and to greater risks of serious injury or death. These risks may be reduced by appropriate skills, knowledge and experience, and by using suitable equipment and procedures. The term technical diving has been credited to Michael Menduno, who was editor of the (now defunct) diving magazine aquaCorps Journal.[55] The concept and term are both relatively recent advents, although divers had already been engaging in what is now commonly referred to as technical diving for decades. In his 1989 book, Advanced Wreck Diving, author and leading technical diver, Gary Gentile, commented that there was no accepted term for divers who dived beyond agency-specified recreational limits for non-professional purposes.[56] Revised editions use the term technical diving, and Gentile published a further book in 1999 entitled The Technical Diving Handbook.[57]

There is some professional disagreement as to what exactly technical diving encompasses.[58][59][60] Nitrox diving and rebreather diving were originally considered technical, but this is no longer universally the case as several certification agencies now offer recreational nitrox and recreational rebreather training and certification.[61][62][63][64][65] Even those who agree on the broad definitions of technical diving may disagree on the precise boundaries between technical and recreational diving. One reasonably widely held definition is that any dive in which at some point of the planned profile it is not physically possible or physiologically acceptable to make a direct and uninterrupted vertical ascent to surface air is a technical dive.[31] The equipment often involves breathing gases other than air or standard nitrox mixtures, multiple gas sources, and different equipment configurations.[66] Over time, some equipment and techniques developed for technical diving have become more widely accepted for recreational diving.[31]

Nitrogen narcosis limits the depth reachable by underwater divers when breathing nitrox mixtures. In 1924 the US Navy started to investigate the possibility of using helium and after animal experiments, human subjects breathing heliox 20/80 (20% oxygen, 80% helium) were successfully decompressed from deep dives,[29] followed by salvage diver Max "Gene" Nohl's dive to 127 meters in 1937.[67] and the 1939 US Navy salvage of USS Squalus.[68] In 1963 saturation dives using trimix were made during Project Genesis,[69] and in 1979 a research team at the Duke University Medical Center Hyperbaric Laboratory started work which identified the use of trimix to prevent High Pressure Nervous Syndrome symptoms.[70] Cave divers started using trimix to allow deeper dives and it was used extensively in the 1987 Wakulla Springs Project and spread to the north-east American wreck diving community, and by 1994 John Chatterton and Gary Gentile, dived on the RMS Lusitania expedition to a depth of 100 meters using trimix.[30]

Rebreather diver returning from a 600 ft (183 m) dive

The challenges of deeper dives and longer penetrations and the large amounts of breathing gas necessary for these dive profiles reawakened interest in rebreathers. The ready availability of oxygen sensing cells beginning in the late 1980s led to a resurgence of interest in rebreather diving. By accurately measuring the partial pressure of oxygen, it became possible to maintain and accurately monitor a breathable gas mixture in the loop at any depth.[31] In the mid 1990s semi-closed circuit rebreathers became available for the recreational scuba market, followed by closed circuit rebreathers around the turn of the millennium.[32] Rebreathers are currently (2018) manufactured for the military, technical and recreational scuba markets.[31]

Sidemount diver pushing a cylinder in front

Sidemount is a scuba diving equipment configuration which has basic scuba sets, each comprising a single cylinder with a dedicated regulator and pressure gauge, mounted alongside the diver, clipped to the harness below the shoulders and along the hips, instead of on the back of the diver. It originated as a configuration for advanced cave diving, as it facilitates penetration of tight sections of cave as, sets can be easily removed and remounted when necessary. The configuration allows easy access to cylinder valves, and provides easy and reliable gas redundancy. These benefits for operating in confined spaces were also recognized by divers who made wreck diving penetrations. Sidemount diving is now growing in popularity within the technical diving community for general decompression diving,[22] and has become a popular specialty for recreational diving, with several diver certification agencies offering recreational and technical level sidemount training programs.[23][24][25]

Dive computers

Uwatec Aladin Pro dive computer showing the log of a previous dive

Scuba decompression planning originally based on printed decompression tables developed for surface supplied air diving. This was inefficient for multi-level dives, and the custom of multilevel diving using tables was not supported by formal experimental testing, but seemed to work reasonably well in practice in accordance with the theoretical models.

The Office of Naval Research funded a project with the Scripps Institute of Oceanography for the theoretical design of a prototype decompression analog computer. The Foxboro Decomputer, Mark I was manufactured by the Foxboro Company and evaluated by the US Navy Experimental Diving Unit in 1957.[71] Confusion between the diffusivity coefficient and the then new concept of tissue half time resulted in a device that did not properly mirror decompression status. Had this error not occurred, the U.S. Navy Tables might never have been developed, and divers might have been using instrumentation to control their dives from 1957 on.

The first recreational mechanical analogue dive computer, the "decompression meter" was designed by the Italians De Sanctis & Alinari in 1959 and built in their factory named SOS, which also made depth gauges. The decompression meter was distributed directly by SOS and also by scuba diving equipment firms such as Scubapro and Cressi. It was very simple in principle: a waterproof bladder filled with gas inside a big casing bled into a smaller chamber through a semi-porous ceramic cartridge (to simulate tissue in/out gassing). The chamber pressure was measured by a bourdon tube, calibrated to indicate decompression status. The device functioned so poorly that it was eventually nicknamed "bendomatic".[72]

In 1965, Stubbs and Kidd applied their decompression model to a pneumatic analogue decompression computer.[73][74]

Several analogue decompression meters were subsequently made, some with several bladders for illustrating the effect on various body tissues, but they were sidelined with the arrival on the scene of electronic computers.

In 1983,[75] the Hans Hass-DecoBrain, designed by Divetronic AG a Swiss start-up, became the first decompression diving computer, capable of displaying the information that today's diving computers do. The DecoBrain was based on A. Bühlmann's 16 compartment (ZHL-12) tissue model[76] which Jürg Hermann, an electronic engineer implemented in 1981 on one of Intel's first single-chip microcontrollers as part of his thesis at the Swiss Federal Institute of Technology.

The 1984 Orca EDGE was an early example of a dive computer.[76] Designed by Craig Barshinger Karl Huggins and Paul Heinmiller, the EDGE did not display a decompression plan, but instead the EDGE showed the ceiling or the so-called "safe-ascent-depth". A drawback was that if the diver was faced by a ceiling, he did not know how long he would have to decompress. The EDGE's large, unique display, however, featuring 12 tissue bars permitted an experienced user to make a reasonable estimate of his or her decompression obligation.

In 1984 the US Navy diving computer (UDC) which was based on a 9 tissue model of Edward D. Thalmann of the Naval Experimental Diving Unit (NEDU), Panama City, who developed the US Navy tables. Divetronic AG completed the UDC development – as it had been started by the chief engineer Kirk Jennings of the Naval Ocean System Center, Hawaii, and Thalmann of the NEDU – by adapting the Deco Brain for US Navy warfare use and for their 9-tissue MK-15 mixgas model under an R&D contract of the US Navy.

Orca Industries continued to refine their technology with the release of the Skinny-dipper in 1987 to do calculations for repetitive diving.[77] They later released the Delphi computer in 1989 that included calculations for diving at altitude as well as profile recording.[77]

Even by the late 1980s, the advent of dive computers had not met with what might be considered widespread acceptance. Combined with the general mistrust, at the time, of taking a piece of electronics that your life might depend upon underwater, there were also objections expressed ranging from dive resorts felt that the increased bottom time would upset their boat and meal schedules, to that knowledgeable divers felt that the increased bottom time would, regardless of the claims, result in many more cases of decompression sickness. Understanding the need for clear communication and debate, Michael Lang of the California State University at San Diego and Bill Hamilton of Hamilton Research Ltd. brought together, under the auspices of the American Academy of Underwater Sciences a diverse group that included most of the dive computer designers and manufacturers, some of the best known hyperbaric medicine theorists and practitioners, representatives from the recreational diving agencies, the cave diving community and the scientific diving community.

The basic issue was made clear by Andrew A. Pilmanis in his introductory remarks: "It is apparent that dive computers "are here to stay" but are still in the early stages of development. From this perspective, this workshop can begin the process of establishing standard evaluation procedures for assuring safe and effective utilization of dive computers in scientific diving."[78]

After meeting for two days the conferees were still in, "the early stages of development," and the "process of establishing standard evaluation procedures for assuring safe and effective utilization of dive computers in scientific diving," had not really begun. University of Rhode Island Diving Safety Officer Phillip Sharkey and ORCA EDGE's Director of Research and Development, prepared a 12-point proposal that they invited the Diving Safety Officers (DSO) in attendance to discuss at an evening closed meeting. Those attending included: Jim Stewart (Scripps Institution of Oceanography), Lee Somers (University of Michigan), Mark Flahan (San Diego State University), Woody Southerland (Duke University), John Heine (Moss Landing Marine Laboratories), Glen Egstrom (University of California, Los Angeles), John Duffy (California Department of Fish and Game), and James Corry (United States Secret Service). Over the course of several hours the suggestion prepared by Sharkey and Heinmiller was edited and turned into the following 13 recommendations:

  1. Only those makes and models of dive computers specifically approved by the Diving Control Board may be used.
  2. Any diver desiring the approval to use a dive computer as a means of determining decompression status must apply to the Diving Control Board, complete an appropriate practical training session and pass a written examination.
  3. Each diver relying on a dive computer to plan dives and indicate or determine decompression status must have his own unit.
  4. On any given dive, both divers in the buddy pair must follow the most conservative dive computer.
  5. If the dive computer fails at any time during the dive, the dive must be terminated and appropriate surfacing procedures should be initiated immediately.
  6. A diver should not dive for 18 hours before activating a dive computer to use it to control his diving.
  7. Once the dive computer is in use, it must not be switched off until it indicates complete outgassing has occurred or 18 hours have elapsed, whichever comes first.
  8. When using a dive computer, non-emergency ascents are to be at the rate specified for the make and model of dive computer being used.
  9. Ascent rates shall not exceed 40 fsw/min in the last 60 fsw.
  10. Whenever practical, divers using a dive computer should make a stop between 10 and 30 feet for 5 minutes, especially for dives below 60 fsw.
  11. Only 1 dive on the dive computer in which the NDL of the tables or dive computer has been exceeded may be made in any 18-hour period.
  12. Repetitive and multi-level diving procedures should start the dive, or series of dives, at the maximum planned depth, followed by subsequent dives of shallower exposures.
  13. Multiple deep dives require special consideration.

As recorded in "Session 9: General discussion and concluding remarks:" "Mike Lang next lead the group discussion to reach consensus on the guidelines for use of dive computers. These 13 points had been thoroughly discussed and compiled the night before, so that most of the additional comments were for clarification and precision. The following items are the guidelines for use of dive computers for the scientific diving community. It was again reinforced that almost all of these guidelines were also applicable to the diving community at large.[78]"

The remarkable thing about this process is that after the AAUS workshop the opposition to dive computers crumbled, numerous new models were introduced, the technology dramatically improved and dive computers became, virtually overnight, the standard pieces of diving equipment that they are today.

In 2001, the US Navy approved the use of Cochran NAVY decompression computer with the VVAL 18 Thalmann algorithm for Special Warfare operations.[79][80]

In 2008, the Underwater Digital Interface (UDI) was released to the market. This dive computer, based on the RGBM model, includes an underwater communication system that enables divers to transmit text messages, also featuring SOS and homing capabilities, and digital 3D compass.[81]

  • training agencies introduce training in the use of dive computers as part of standard training
  • introduction of wireless gas pressure displays and consumption rate calculations into dive computers - estimate of remaining bottom time allows easier gas management - reduction in risk of out of gas emergencies for single mix no-stop dives.

Industry growth

Recreational scuba diving industry diving experienced major growth at the end of the 20th century. Number of new divers per year has stabilised since then. Estimated 1 million new divers were certified in 2012.

Scuba diving remains a dynamic recreation - there is continuous development of equipment and practices.

Many recreational divers trained every year, but most do not appear to dive very often. Large dropout rate after initial and advanced training.

Industry sectors:

  • Diver training - commercialisation of training, breaking training down into smaller components for diver convenience and industry profit
  • Equipment sales - wide range of equipment, catering for fashion and personal preferences as well as technical necessity, safety and effectiveness
  • Consumables sales and equipment maintenance - supporting the astablished diver as well as the novice and occasional diver.
  • Dive charters, guided dives - targeting vacationers and travellers to exotic destinations.

Professional scuba industry much lower numbers, but higher levels of training, and lower droput rate. Greater motivation as it is part of the job. Probably insignificant to the industry as a whole. Slightly different equipment use. Military scuba supports some manufacturers of specialised equipment

Scuba training

Professional scuba training and certification

Professional diving is done as a part of the work the diver is employed to do, and as such is generally subject to occupational health and safety regulation. This extends to training, certification and the asssociated training standards.[82][83][84] Commercial diver training is often regulated by national or state government, so details and standards tend to vary internationally, but there are systems in place for recognition of minimum standards between jurisdictions, allowing some international portability of commercial diver certification. In some jurisdictions a distinction is made between industrial commercial diving and professional diving as part of scientific or public safety occupations, where a variety of regulatory exemptions may apply. In situations where exemptions apply, the training and certification through recreational agencies may be recognised for professional diving activities where this is not permitted for industrial commercial diving. Military diving is frequently independent of commercial diving regulation, and military diver training is usually controlled by the armed forces which employ the divers. In some cases there is recognition of military diver qualifications for work in the civilian industry, in other cases not.[84]

The American Academy of Underwater Sciences (AAUS) is a group of scientific organizations and individual members who conduct scientific and educational activities underwater. It was organized in 1977 and incorporated in the State of California in 1983. The purpose of the AAUS is to facilitate the development of safe and productive scientific divers and scientific diving procedures through education, research, advocacy, and the advancement of the AAUS Standards for Scientific Diving Certification and Operation of Scientific Diving Programs. These are the consensual guidelines for scientific diving programs in the US, and are recognized by Occupational Safety and Health Administration as the "Standard" for scientific diving. These standards are followed by all AAUS Organizational Members allowing for reciprocity between institutions. Each institution is responsible for upholding the standards within its program and among its divers. The AAUS peer reviews the standards on a regular basis, so they represent the consensus of the scientific diving community and state-of-the-art technologies.[85][86][87]

The CMAS Scientific committee compiled and edited the UNESCO Code of Practice for Scientific diving between 1977 and the publication of the document as Unesco technical papers in marine science 53 in 1988.[88]

The International Diving Schools Association (IDSA) was formed in 1982 with the primary purpose of developing common international standards for commercial diver training.[89] The Association has published basic tables for international comparison of training standards for commercial divers and some specialist non-diving qualifications such as diving supervisors, diving medical technicians and life support technicians based on consensus of members.[90]

The International Diving Regulators Forum (IDRF) confirmed its principals and purpose at their meeting in London in September 2009. The statement of principals and purpose states "The forum has agreed to work together towards mutual recognition to identify and implement best practice in diver training and assessment with the objective of harmonising cross-border diver training outside Europe."[91] The organisation has since changed its name to International Diving Regulators and Certifiers Forum (IDRCF)[92] Members of the IDRF include ADAS (Australia), DCBC (Canada), HSE (UK), PSA (Norway), and the Secretariat General to the Sea Progress Committee (France).[91]

  • UK HSE Diving at work regulations[82]
  • Australian Diver Accreditation Scheme (ADAS) and Australian scientific diving CoP
  • South African Diving Regulations - 2001, 2009, previous to 2001, 2018, CoP for commercial diver training[93][84][94]
  • Various Canadian standards and regulations

Recreational scuba training and certification

The need for formalised training was recognised due to the high number of recreational scuba accidents. this started with informal training and led to the creation of training and certification agencies. BS-AC was formed in 1953,[95] CMAS in 1959,[96] NAUI in 1960[97] and PADI in 1966.[98]

The sport of scuba diving had its roots among the multitude of small enthusiastic snorkelling and spearfishing clubs in the decades just before and after the Second World War.[99]:ch.12 After the invention of the "aqualung" by Cousteau and Gagnan, the first commercially marketed underwater breathing apparatus became available for sale for sporting purposes in the late 1940s. In 1951, Jim Auxie Jr and Chuck Blakeslee started a magazine called The Skin Diver (later renamed Skin Diver Magazine). Neal Earl Hess, who had been teaching divers for two years, contributed to its column "The Instructors Corner", to inform readers about scuba.[97] He soon established a column called "The National Diving Patrol" as a section to name new skin and scuba diving "instructors".[100] Still, no official training and certifying agency existed, except for the training and resources provided by the military (Underwater Demolition Teams) and dive clubs.[100]

Graduate students Conrad Limbaugh and Andy Rechnitzer used two of the first aqualungs brought to the US in 1948 on the California coast and nenrolled at Scripps Institution of Oceanography in 1950, where they informally tutored some of their colleagues. After a student diver at another university died in a scuba accident in 1952, Scripps administration got Limbaugh to produce the first formal scuba training manual and course in the US.[101]

In 1952, Al Tillman, the director of sports for the Los Angeles County Department of Parks and Recreation, wrote a letter[102] to Parks and Recreation director Paul Gruendyke stating that: “A new sport—skin diving—is becoming popular in the area. Recently while diving in Palos Verdes, I ran into several divers in the water with me who didn’t know what they were doing. One had one of the new underwater breathing units that allows divers to stay under for long periods of time... I propose that my department get involved in this sport and provide training classes. I believe that diving will grow in the future and we have an obligation to make the sport as safe as possible."[100][103][104]

On 15 October 1953, the British Sub-Aqua Club (BSAC) was founded by Oscar Gugen, Peter Small, Mary Small, and Trevor Hampton[95][105]

The Los Angeles County Department of Parks and Recreation sent three representatives - Al Tillman, Bev Morgan and Ramsey Parks - to take Limbaugh's course in 1954. They subsequently started training recreational scuba divers, making this the first scuba instructor training in America.[101] In 1955, Tillman and L.A. County lifeguard Bev Morgan created the L.A. County Parks and Recreational Underwater Instructor Certification Course (1UICC) in an effort to respond to the growing number of diver requests.[106] It was the world’s first civilian training program to certify recreational divers, and soon began granting Provisional Certification to instructors across the country.[100][107][108]

As the new sport of scuba diving rapidly expanded through the 1950s, several sporting organisations – notably the YMCA – began programmes to train swimming enthusiasts in this new aquatic pastime and began to codify what were believed to be the proper practices needed for this expanding amateur sport.[99]:292–295 The YMCA formed a committee to produce a training manual - "The New Science of Skin and Scuba Diving", which was first published in 1957, and in 1959 conducted the first national instructor training program.[101]

In the 1960 May issue of Skin Diver Magazine, The National Diving Patrol was announced as an official, national organization. Its purpose and function was "to insure competent underwater instruction and to reduce diving accidents through education."[109] In 1959, its name changed to the National Association of Underwater Instructors (NAUI).[100] In October 1961, NAUI was incorporated in the State of California as a non-profit educational organization, with Al Tillman as the President and Neal Hess as the Executive Secretary.[100] In 1966 Ralph Ericson and John Cronin formed the Professional Association of Diving Instructors (PADI) in response to a perception that the existing system was not sufficiently responsive to the needs of inland diving instructors. A further split occurred in 1967 with the creation of the National Association of Scuba Diving Schools (NASDS) by John Gaffney and a group of diving equipment retailers, followed by a split from NASDS led by Bob Clark to form Scuba Schools International (SSI) in 1970.[101]

The Florida Skin Divers Association was formed from a group of local scuba diving clubs in 1952. In 1976 their scuba training committee split from FSDA to form the International Diving Educators Association (IDEA).[101]

Early scuba training included a large component of theory provided by classroom instruction, which could include more than 30 hours of physics, equipment mechanics and other theoretical aspects of diving knowledge. The skills training included fitness, watermanship skills and stress management training, where staff would put the learner diver through in-water situations simulating the most likely emergency situations, so that the divers would be more likely to manage real life emegencies with composure. Much of this training was, and still is, part of commercial and military diver training. This training required the diver to show competence at both routine procedures and managing reasonably foreseeable emergencies - much the same requirement that persists for certification of professional divers. This approach could be justified by the unsophisticated equipment in use, which could be, and often was, serviced by the diver, and was more prone to malfunctions than later generation equipment. Current standard equipment such as submersible pressure gauges, buoyancy compensators and decompression computers were not available, and the recreational diver was obliged to avoid decompression illness by planning the dive and monitoring the planned dive using a diving watch, simple depth gauge, and decompression tables, sometimes shared with a companion. In the event of an equipment malfunction, the diver was unsupported except by a diving companion. This required a level of competence and discipline that is no longer considered essential for recreational diving by most certification agencies.[101]

By the late 1960s equipment was becoming more reliable, and the recreational diver was less likely to experience malfunctions, but the training remained much the same. An increased interest in diving among the general public, and the commercial drive to sell more equipment and training began to change the content and methods of training to a more widely marketable model in the mid 1970s. This included expanding the training to include open-water experience, which was previously not a universal requirement. By the 1970s a second open-water checkout was standard, and more were subsequently added in recognition that training in the actual environment where the skills will be used is important to develop competence. By the 1980s the current minimum requirement for open water diving of four training dives was well established.[101]

At the same time, classroom and confined water instruction changed to adapt to the changes on equipment, and to de-emphasise fundamental theory in favour of practical applications more likely to be useful in the expected range of experience for a recreational diver. The general acceptance of the buoyancy compensator, submersible pressure gauge, and alternate air supply in the form of a secondary demand valve as standard equipment changed the preferred emergency procedures for handling out-of-air emergencies, which were simpler to learn as well as reducing the risk. The buoyancy compensator also allowed training to focus on better buoyancy control and alternative methods of establishing appropriate buoyancy. Stress management was de-emphasised, and skills training concentrated on learning the standardised skill set known to be effective most of the time. These changes helped to allow a wider range of potential divers to enter the market.[101]

The buddy system had been thought to be a useful corollary to the "never swim alone" edicts of the YMCA swimming and lifesaving programmes. Cousteau himself independently implemented a buddy system from the earliest days of exploratory diving after a number of diving incidents.[110] The buddy system did indeed have some very useful aspects: the cross checking of equipment before dives, the facilitating of assistance for possible entanglement problems or equipment failures, and the enhancement of the social nature of diving. The YMCA continued as a major force in the development of diver certification during the first 50 years of this new sport. When these programmes were adopted by the emerging scuba certification agencies such as BS-AC, NAUI and PADI, the practice of buddy diving led to one of the two main mantras of recreational scuba: "never hold your breath" and "never dive alone".[111][112]

An international congress of fifteen diving federations representing all underwater disciplines met in Brussels on 28 September 1958. National delegates attended from Belgium, Brazil, France, Federal Republic of Germany, Greece, Italy, Monaco, Portugal, Switzerland,the United Kingdom, the United States of America and the former Yugoslavia. Following a decision at that congress, a meeting was held in Monaco on 9–11 January 1959, which officially established the World Underwater Federation, with an acronym CMAS based on its French title Confédération Mondiale des Activités Subaquatiques.[96][113]

The Professional Association of Diving Instructors (PADI) is a recreational diving membership and diver training organization founded in 1966 by John Cronin and Ralph Erickson.[98] Cronin was originally a NAUI instructor who decided to form his own organization with Erickson, and to break diver training down into several modular courses instead of the single universal course then prevalent.[114] Diving Science and Technology Corporation (DSAT), the development arm for the Recreational Dive Planner and PADI's Tec-Rec program, was founded in November 1986.[115]

Dick Rutkowski, previously a dive supervisor for the National Oceanic and Atmospheric Administration (NOAA), formed the International Association of Nitrox Divers (IAND) in 1985 to teach the use of nitrox, which had been pioneered by NOAA, to recreational divers. In 1992 the name was changed to the International Association of Nitrox and Technical Divers (IANTD).[116]

Technical Diving International (TDI) was founded in 1994 by Bret Gilliam, and others after a split from IANTD in 1993[117][118][119] to provide training for specialized diving situations. TDI courses include open circuit Nitrox,[120] Trimix and Rebreather [121] courses, and training for overhead environments like caves and wrecks.[122] In 1998, International Training started a sister organization to TDI known as Scuba Diving International (SDI) focusing on recreational scuba[123] and in 2000, Emergency Response Diving International (ERDI) to teach public safety diving.

Following the recognition that solo diving does occur, is acceptably safe to many divers, and is a relatively common practice, Scuba Diving International (SDI) started Solo diving training and certification in 1999.[124]

In 2006 BSAC was the first recreational diving agency to introduce Nitrox diving as part of core training.[105][125]

Internationally recognised minimum training standards for recreational divers have been published by: RSTC, WRSTC, CMAS, ISO etc.( Rebreather training council?)

The US Recreational Scuba Training Council (RSTC) was created in 1986 as a permanent body to sustain a relationship between various recreational diving training organisations. In 1991, it replaced the Diving Equipment Manufacturers Association (DEMA) (renamed as the Diving Equipment and Marketing Association in 1998) as the secretariat for the then American National Standards Institute (ANSI) committee for underwater safety (also known as the Z86 Committee). The Z86 committee was subsequently replaced by the committee for Diving Instructional Standards and Safety (also known as the Z375 committee).[126] In 2007 it retained its appointment as the ANSI Accredited Standards Developer (ASD) for the Z375 committee.[127]

The US RSTC has been responsible for the development of a standard medical statement (in conjunction with the Undersea and Hyperbaric Medical Society) and minimum training standards for diving hand signals and the following recreational diver grades - Introductory Scuba Experience, Supervised Diver, Open Water Diver, Enriched Air Nitrox Certification, Entry level Rescue Diver, Dive Supervisor, Assistant Instructor, Scuba Instructor and Scuba Instructor Trainer for member agencies.[128][129]

The World Recreational Scuba Training Council (WRSTC) was founded in 1999 to create minimum recreational diving training standards for the various scuba diving certification agencies across the world which are members. The WRSTC restricts its membership to national or regional councils. These councils consist of individual training organizations who collectively represent at least 50% of the annual diver certifications in the member council's country or region.[130] A national council is referred to as a RSTC (Recreational Scuba Training Council).

The International Organization for Standardization (ISO) published minimum standards in 2007 (superseded by 2014 revisions) for:

  • ISO 24801-1:2014 Recreational diving services - Requirements for the training of recreational scuba divers - Part 1: Level 1 - Supervised diver,[131]
  • ISO 24801-2:2014 Recreational diving services - Requirements for the training of recreational scuba divers - Part 2: Level 2 - Autonomous diver,[132]
  • ISO 11107 – ‘Nitrox diving’
  • ISO 24801-3:2014 Recreational diving services - Requirements for the training of recreational scuba divers - Part 3: Level 3 - Dive leader,[133]
  • ISO 24802-1:2014 Recreational diving services - Requirements for the training of scuba instructors - Part 1: Level 1, and ISO 24802-2:2014 Recreational diving services - Requirements for the training of scuba instructors - Part 2: Level 2 [134]

Research into scuba diver safety

The non-profit Divers Alert Network (DAN) was founded at Duke University in 1980 to promote safe diving.[135][136] and has expanded into a global group of not-for-profit organisations providing safety and insurance services to members and maintaining databases on diving accidents. They publish research results and collaborate with other organizations on projects of common interest, mostly regarding scuba diving safety.[137]

Project Stickybeak was a privately run collation of data on diving fatalities in the Asia Pacific region run by Douglas Walker for several years, with annual reports on fatality statistics.[138] In 2007 Project Stickybeak was incorporated into the DAN Asia-Pacific data collection and dive accident reporting project.[139]

The British Sub-Aqua Club publishes an annual report of diving incidents.[140]


History of specific fields of application for scuba diving

Military diving

Italian World War II frogman of "Gruppo Gamma"
A 1945 British navy frogman with complete gear, including the Davis apparatus, a rebreather originally conceived in 1910 by Robert Davis as an emergency submarine escape set.
A SEAL Delivery Team member climbs aboard a delivery vehicle before launching from the back of the submarine USS Philadelphia.

The first modern military scuba divers were the World War II Italian commando frogmen, of Decima Flottiglia MAS (now "ComSubIn": Comando Raggruppamento Subacquei e Incursori Teseo Tesei) which formed in 1938 and was first in action in 1940. Originally these divers were called "Uomini Gamma" because they were members of the top secret special unit called "Gruppo Gamma", which originated from the kind of Pirelli rubber skin-suit[141] nicknamed muta gamma used by these divers. Later they were nicknamed "Uomini Rana", Italian for "frog men"[142] This special corps used an early oxygen rebreather scuba set, the Auto Respiratore ad Ossigeno (A.R.O), a development of the Dräger oxygen self-contained breathing apparatus designed for the mining industry and of the Davis Submerged Escape Apparatus made by Siebe, Gorman & Co and by Bergomi, designed for escaping from sunken submarines.[143][144][145] The Italian frogmen trained in La Spezia, Liguria, using swimfins, rubber dry suit, and the new A.R.O. scuba unit.[146] After Italy declared war, the Decima Flottiglia MAS (Xª MAS) attempted several attacks on British naval bases in the Mediterranean between June 1940 and July 1941, but none was successful, because of equipment failure or early detection by British forces. On September 10, 1941, eight Xª MAS frogmen were inserted by submarine close to the British harbour at Gibraltar, where using human torpedoes to penetrate the defences, sank three merchant ships with limpet mines before escaping through neutral Spain. An even more successful attack, the Raid on Alexandria, was mounted on 19 December on the harbour at Alexandria, again using human torpedoes. The raid resulted in disabling the battleships HMS Queen Elizabeth and HMS Valiant together with a destroyer and an oil tanker, but all six frogmen were captured.[147]

The British Royal Navy had captured an Italian human torpedo during a failed attack on Malta; they developed a copy called the Chariot and formed a unit called the Experimental Submarine Flotilla, which later merged with the Special Boat Service. A number of Chariot operations were attempted, most notably Operation Title in October 1942, an attack on the German battleship Tirpitz, which had to be abandoned when a storm hit the fishing boat which was towing the Chariots into position.[148] The last and most successful British operation resulted in sinking two liners in Phuket harbour in Thailand in October 1944.[149]

An oxygen rebreather set called the Lambertsen Amphibious Respirator Unit (LARU) was invented in the United States 1939 by Christian Lambertsen,[150] and was patented in 1940.[151] Lambertsen later renamed it the Self Contained Underwater Breathing Apparatus, which, contracted to SCUBA, eventually became the generic term for both open circuit and rebreather autonomous underwater breathing equipment. Lambertson demonstrated it to the Office of Strategic Services (OSS) after being rejected by the U.S. Navy[152] OSS not only bought into the concept, they hired Dr. Lambertsen to lead the program and build-up the dive element of their maritime unit.[152] The OSS was the predecessor of the Central Intelligence Agency and the maritime element still exists inside their Special Activities Division.[153]

The Shayetet 13 commandos of the Israeli Navy have carried out a number of underwater raids on harbors. They were initially trained by veterans of Xª MAS and used Italian equipment.[154] As part of Operation Raviv in 1969, eight frogmen used two human torpedoes to enter Ras Sadat naval base near Suez, where they destroyed two motor torpedo boats with mines.[155]

During the 1982 Falklands War, the Argentinian Naval Intelligence Service planned an attack on British warships at Gibraltar. Code named Operation Algeciras, three frogmen, recruited from a former anti-government insurgent group, were to plant mines on the ships' hulls. The operation was abandoned when the divers were arrested by Spanish police and deported.[156]

In 1985, the French nuclear weapons tests at Moruroa in the Pacific Ocean was being contested by environmental protesters led by the Greenpeace campaign ship, Rainbow Warrior. The Action Division of the French Directorate-General for External Security devised a plan to sink the Rainbow Warrior while it was berthed in harbor at Auckland in New Zealand. Two divers from the Division posed as tourists and attached two limpet mines to the ship's hull; the resulting explosion sank the ship and killed a Netherlands citizen on board. Two agents from the team, but not the divers, were arrested by the New Zealand Police and later convicted of manslaughter. The French government finally admitted responsibility two months later.[157]

In 1989, during the U.S. invasion of Panama, a team of four U.S. Navy SEALs using rebreathers conducted a combat swimmer attack on the Presidente Porras, a gunboat and yacht belonging to Manuel Noriega. The commandos attached explosives to the vessel as it was tied to a pier in the Panama Canal, escaping only after being attacked with grenades.[158] Three years later during Operation Restore Hope, members of SEAL Team One swam to shore in Somalia to measure beach composition, water depth, and shore gradient ahead of a Marine landing.[159]

Cave diving

The exploration of underwater parts of caves was started using surface supplied equipment before scuba became available. Jacques-Yves Cousteau, co-inventor of the first commercially successful open circuit scuba equipment, is claimed to have been the world's first open circuit scuba cave diver.

Two regions have had particular influence on cave diving techniques and equipment due to their very different cave diving environments. These are the United Kingdom, and USA, mainly Florida.

UK history

The number of sites where standard diving dress could be used is limited and there was little progress before the outbreak of World War II reduced the caving community considerably. The development of underwater warfare made a lot of surplus equipment available after the war. The Cave Diving Group re-formed in 1946 and progress was rapid. Typical equipment at this time was a frogman rubber diving suit for insulation (water temperature in the UK is typically 4 °C), a closed circuit oxygen rebreather and an "Apparatus For Laying Out Line And Underwater Navigation." The "AFLOLAUN" consisted of lights, line-reel, compass, notebook (for the survey), batteries, and more.

Progress was typically by "bottom walking", as this was considered less dangerous than swimming in the absence of buoyancy control. The use of oxygen put a depth limit on the dives. This was the normal procedure until approximately 1960 when new techniques using wetsuits and open-circuit scuba sets were introduced. The development of side mounting cylinders, helmet-mounted lights and free-swimming with fins increased accessibility, and the increasing capacity and pressure rating of air cylinders extended dive durations.[160]

US History

In the 1970s, cave diving greatly increased in popularity among divers in the United States. However, there were very few experienced cave divers and almost no formal classes to handle the surge in interest. The result was a large number of divers trying to cave dive without any formal training. This resulted in more than 100 fatalities over the course of the decade. The state of Florida came close to banning SCUBA diving around the cave entrances. The cave diving organizations responded to the problem by creating training programs and certifying instructors, in addition to other measures to try to prevent these fatalities. This included posting signs, adding no-lights rules, and other enforcements.

The cave diving pioneer Sheck Exley explored many underwater cave systems in Florida, and elsewhere in the US and the rest of the world. On 6 February 1974, Exley became the first chairman of the Cave Diving Section of the National Speleological Society.[161]

Since the 1980s, cave diving education has greatly reduced diver fatalities, and it is now uncommon for a certified cave diver to die in an underwater cave. Also in the 1980s, refinements were made to the equipment used for cave diving, most importantly better lights with smaller batteries. In the 1990s, cave diving equipment configurations became more standardized, due mostly to the adaptation and popularization of the backplate and wing based "Hogarthian Rig", developed in North Florida, which keeps equipment configurations simple and streamlined.

Documentary films made by Wesley C. Skiles and Jill Heinerth have contributed to the increasing popularity of cave diving in the early 21st century.

Diving on shipwrecks and other sunken structures

Wreck diving is recreational diving where the wreckage of ships, aircraft and other artificial structures are explored. Although most wreck dive sites are at shipwrecks, there is an increasing trend to scuttle retired ships to create artificial reef sites. Diving to crashed aircraft can also be considered wreck diving.[162] The recreation of wreck diving makes no distinction as to how the vessel ended up on the bottom, and the perpose is for the entertainment of the diver.

Some wreck diving involves penetration of the wreckage, making a direct ascent to the surface impossible for a part of the dive.

The scientific discipline of underwater archaeology also involves diving on shipwrecks, but in this field the intention is to collect data or preserve artifacts.

Marine salvage is the recovery of artifacts and material from shipwrecks and other underwater sites, for commercial reasons or because the artifacts or materials are perceived as having monetary or personal value other than scientific or historical. Commercial marine salvage may be restricted to the use of surface supplied diving equipment in some jurisdictions, but work is also done using scuba.

  • Origins in salvage and archaeology.
  • Development into a recreational activity by scuba divers.

References

  1. 1 2 3 Dekker, David L. "1889. Draegerwerk Lübeck". Chronology of Diving in Holland. www.divinghelmet.nl. Retrieved 14 January 2017.
  2. 1 2 3 4 5 6 Davis, R. H. (1955). Deep Diving and Submarine Operations (6th ed.). Tolworth, Surbiton, Surrey: Siebe Gorman & Company Ltd. p. 693.
  3. 1 2 3 4 Quick, D. (1970). A History Of Closed Circuit Oxygen Underwater Breathing Apparatus. RANSUM-1-70 (Report). Sydney, Australia: Royal Australian Navy, School of Underwater Medicine. Retrieved 3 March 2009.
  4. 1 2 1944 Lambertsen's breathing appartus patent in Google Patents
  5. 1 2 Brubakk, Alf O.; Neuman, Tom S., eds. (2003). Bennett and Elliott's physiology and medicine of diving (5th Rev ed.). Philadelphia, Pennsylvania: Saunders Ltd. ISBN 0702025712.
  6. 1 2 Vann R. D. (2004). "Lambertsen and O2: beginnings of operational physiology". Undersea Hyperb Med. 31 (1): 21–31. PMID 15233157. Retrieved 25 April 2008.
  7. 1 2 Butler, F. K. (2004). "Closed-circuit oxygen diving in the U.S. Navy". Journal of Undersea and Hyperbaric Medicine. Bethesda, Maryland: Undersea and Hyperbaric Medicine Society. 31 (1): 3–20. PMID 15233156. Retrieved 25 April 2008.
  8. 1 2 "Definition of scuba in English". Oxford University Press.
  9. 1 2 3 US Navy (2006). US Navy Diving Manual, 6th revision. Washington, DC.: US Naval Sea Systems Command.
  10. 1 2 Dekker, David L. "1860. Benoit Rouquayrol – Auguste Denayrouze". Chronology of Diving in Holland. www.divinghelmet.nl. Retrieved 26 January 2018.
  11. 1 2 3 Le Prieur, Yves (1956). Commandant Le Prieur. Premier Plongée (First Diver) (in French). Editions France-Empire.
  12. 1 2 Cousteau, Jacques-Yves; Dumas, Frederic (1953). The Silent World (5th impression ed.). London: Hamish Hamilton.
  13. 1 2 Grima, Laurent-Xavier. "Aqua Lung 1947–2007, soixante ans au service de la plongée sous-marine!" (in French).
  14. 1 2 Campbell, Bob (Summer 2006). "Siebe-Gorman's 'Tadpole' set". Historical Diving Times (39). Retrieved 3 August 2017 – via Vintage double hose regs collector – Siebe Gorman-Heinke.
  15. 1 2 Byron, Tom (8 April 2014). History of Spearfishing and Scuba Diving in Australia: The First 80 Years – 1917 to 1997. Xlibris Corporation. pp. 14, 35, 305, 320. ISBN 978-1493136704. Retrieved 20 September 2016. *
  16. 1 2 Roberts, Fred M. (1963). Basic Scuba: Self contained underwater breathing apparatus: Its operation, maintenance and use (2nd ed.). New York: Van Nostrand Reinholdt.
  17. 1 2 In The Silent World, a film shot in 1955, before the invention of buoyancy control devices, Cousteau and his divers are continuously using their fins to maintain depth.
  18. 1 2 Hanauer, Eric (1994). Diving Pioneers: An Oral History of Diving in America. Aqua Quest Publications, Inc. ISBN 9780922769438.
  19. 1 2 Krestovnikoff, Miranda; Halls, Monty (2008). Scuba Diving. Eyewitness Companions. Dorling Kindersley Ltd. ISBN 9781405334099.
  20. 1 2 Jablonski, Jarrod (2006). "6: The Doing It Right Equipment". Doing It Right: The Fundamentals of Better Diving. High Springs, Florida: Global Underwater Explorers. pp. 75–121. ISBN 0971326703.
  21. 1 2 Mount, Tom (2008). "9: Equipment Configuration". In Mount, Tom; Dituri, Joseph. Exploration and Mixed Gas Diving Encyclopedia (1st ed.). Miami Shores, Florida: International Association of Nitrox Divers. pp. 91–106. ISBN 978-0915539109.
  22. 1 2 "PADI launches new Tec Sidemount Diver course". Diverwire. 5 March 2012. Archived from the original on 6 June 2012. Retrieved 18 August 2012.
  23. 1 2 Hires, Lamar (Summer 2010). "Sidemount – Not Just For Cave Divers Anymore". Alert Diver Magazine. Archived from the original on 17 February 2013. Retrieved 18 August 2012.
  24. 1 2 "PADI puts full weight behind sidemount diving". Diver Magazine. 6 June 2010. Archived from the original on 6 October 2012. Retrieved 18 August 2012.
  25. 1 2 "Holy Sidemount!". X-Ray Magazine. 25 April 2010. Retrieved 18 August 2012.
  26. 1 2 NOAA Diving Program (U.S.) (2001). Joiner, James T., ed. NOAA Diving Manual, Diving for Science and Technology (4th ed.). Silver Spring, Maryland: National Oceanic and Atmospheric Administration, Office of Oceanic and Atmospheric Research, National Undersea Research Program. ISBN 978-0941332705. CD-ROM prepared and distributed by the National Technical Information Service (NTIS) in partnership with NOAA and Best Publishing Company
  27. 1 2 Lang, M.A. (2001). DAN Nitrox Workshop Proceedings. Durham, NC: Divers Alert Network. p. 197. Retrieved 2 May 2008.
  28. 1 2 Beresford, M.; Southwood, P. (2006). CMAS-ISA Normoxic Trimix Manual (4th ed.). Pretoria, South Africa: CMAS Instructors South Africa.
  29. 1 2 Kane JR (1998). "Max E Nohl and the world record dive of 1937. (reprinted from Historical Diver 1996; 7(Spring):14-19.)". Journal of the South Pacific Underwater Medicine Society. 28 (1). Retrieved 29 December 2015.
  30. 1 2 Warwick, Sam (May 2015). "100 years submerged". DIVER. Retrieved 29 December 2015.
  31. 1 2 3 4 5 6 Menduno, Michael (18–20 May 2012). Vann, Richard D.; Denoble, Petar J.; Pollock, Neal W., eds. Building a consumer rebreather market: Lessons from the technical diving revolution (PDF). Rebreather Forum 3 Proceedings. Durham, North Carolina: AAUS/DAN/PADI. pp. 2–23. ISBN 978-0-9800423-9-9.
  32. 1 2 Mitchell, Simon J; Doolette, David J (June 2013). "Recreational technical diving part 1: an introduction to technical diving methods and activities". Diving and Hyperbaric Medicine. 43 (2).
  33. ↑ Old French for "sir" or "Mister"
  34. ↑ Fréminet's invention mentioned in the Musée du Scaphandre website (a diving museum in Espalion, south of France)
  35. ↑ Alain Perrier, 250 réponses aux questions du plongeur curieux, Éditions du Gerfaut, Paris, 2008, ISBN 978-2-35191-033-7 (p. 46, in French)
  36. ↑ French explorer and inventor Jacques-Yves Cousteau mentions Fréminet's invention and shows this 1784 painting in his 1955 documentary Le Monde du silence.
  37. ↑ In 1784 Fréminet sent six copies of a treatise about his machine hydrostatergatique to the chamber of Guienne (nowadays called Guyenne). On April 5, 1784, the archives of the Chamber of Guienne (Chambre de Commerce de Guienne) officially recorded: Au sr Freminet, qui a adressé à la Chambre six exemplaires d'un précis sur une « machine hydrostatergatique » de son invention, destinée à servir en cas de naufrage ou de voie d'eau déclarée.
  38. ↑ Daniel David, Les pionniers de la plongée – Les précurseurs de la plongée autonome 1771–1853, 20X27 cm 170 p, first published in 2008
  39. ↑ Davis p. 563
  40. ↑ Jones, Thomas P., ed. (1835). Journal of the Franklin Institute of the State of Pensylvania. XV. Philadelphia, Pennsylvania: Franklin Institute. pp. 147–149.
  41. ↑ "Avec ou sans bulles ? (With or without bubbles?), an article (in French) by Eric Bahuet, published in the specialized Web site plongeesout.com".
  42. ↑ "Ichtioandre's technical drawing".
  43. ↑ James, Augerville, Condert and Saint Simon Sicard as mentioned by the Musée du Scaphandre Web site (a diving museum in Espalion, south of France)
  44. ↑ "Histoire de la plongée ("history of diving"), by Mauro Zürcher, 2002" (PDF).
  45. ↑ "Le Scaphandre Aoutonome" (in French). Espalion, France: Musée du Scaphandre. Missing or empty |url= (help) Archived 30 October 2012 at the Wayback Machine.
  46. ↑ Vidal Sola, Clemente (3 October 1957). "Espana conquista la marca mundial de profundidad con escafandra autonoma". La Vanguardia Espanola. p. 20. Retrieved 14 April 2015.
  47. ↑ Bjorkman, Bart. "Technology and Guts". Advanced Diver Magazine. Retrieved 26 January 2018.
  48. ↑ Kemp, Paul (1990). The T-Class submarine – The Classic British Design. Arms and Armour. p. 105. ISBN 978-0853689584.
  49. ↑ "Drägerwerk". Divingheritage.com.
  50. ↑ Marí, Alejandro Sergio. Bech, Janwillem, ed. "The Pirelli Aro WWII". therebreathersite.nl.
  51. ↑ Shapiro, T. Rees (19 February 2011). "Christian J. Lambertsen, OSS officer who created early scuba device, dies at 93". The Washington Post.
  52. ↑ Lang, Michael (2006). "A The state of oxygen-enriched air (nitrox)". Diving and Hyperbaric Medicine. 36 (2): 87–93. Retrieved 21 March 2014.
  53. ↑ "NAUI History". National Association of Underwater Instructors. Retrieved 30 January 2018.
  54. ↑ Richardson, D.; Shreeves, K. (1996). "The PADI Enriched Air Diver course and DSAT oxygen exposure limits". South Pacific Underwater Medicine Society Journal. 26 (3). ISSN 0813-1988. OCLC 16986801. Retrieved 2 May 2008.
  55. ↑ Gilliam, Bret (25 January 1995). Deep Diving. p. 15. ISBN 978-0-922769-31-5. Retrieved 14 September 2009.
  56. ↑ Gentile, Gary (1988). Advanced Wreck Diving Guide. ISBN 0-87033-380-1.
  57. ↑ Gentile, Gary (1999). The Technical Diving Handbook (1st ed.). ISBN 978-1883056056.
  58. ↑ Gorman, Des F. (1992). "High-tech diving". South Pacific Underwater Medicine Society Journal. 22 (1).
  59. ↑ Gorman, Des F. (1995). "Safe Limits: A International Dive Symposium. Introduction". South Pacific Underwater Medicine Society Journal. 25 (1). Retrieved 7 August 2009.
  60. ↑ Hamilton Jr, R. W. (1996). "What is technical diving? (letter to editor)". South Pacific Underwater Medicine Society Journal. 26 (1). Retrieved 7 August 2009.
  61. ↑ Rossier, Robert N. (January 2000). Recreational Nitrox Diving (1 ed.). Best Publishing Company. ISBN 978-0941332835. Retrieved 25 April 2016.
  62. ↑ Douglas, Eric (2011). "Nitrox". Alert Diver online - Fall 2011. Divers Alert Network. Archived from the original on 31 May 2016. Retrieved 25 April 2016.
  63. ↑ Staff (2016). "Recreational Diver Level 1 - Nitrox diver". Global Underwater Explorers website. Global Underwater Explorers. Retrieved 25 April 2016.
  64. ↑ Menduno, Michael (2014). "Rise of the Recreational Rebreather". Diver magazine - online. Diver magazine. Retrieved 25 April 2016.
  65. ↑ Staff (2016). "Rebreather diver". PADI website. PADI. Retrieved 25 April 2016.
  66. ↑ Richardson, Drew (2003). "Taking 'tec' to 'rec': the future of technical diving". South Pacific Underwater Medicine Society Journal. 33 (4). Retrieved 7 August 2009.
  67. ↑ staff (1937-12-13). "Science: Deepest Dive". Time Magazine. Retrieved 2011-03-16.
  68. ↑ Acott, Christopher (1999). "A brief history of diving and decompression illness". South Pacific Underwater Medicine Society Journal. 29 (2). ISSN 0813-1988. OCLC 16986801. Retrieved 2009-03-17.
  69. ↑ Bond, G. "New developments in high pressure living". Naval Submarine Medical Research Laboratory Technical Report 442. Retrieved 29 January 2018.
  70. ↑ Camporesi, Enrico M (2007). "The Atlantis Series and Other Deep Dives". In: Moon RE, Piantadosi CA, Camporesi EM (eds.). Dr. Peter Bennett Symposium Proceedings. Held May 1, 2004. Durham, N.C.:. Divers Alert Network. Retrieved 16 November 2011.
  71. ↑ Searle Jr, W. F. (1957). "Foxboro Decomputer Mark I". United States Navy Experimental Diving Unit Technical Report. NEDU-7-57. Retrieved 2008-05-02.
  72. ↑ Davis, M (2006). "Editor comment following article on "Automatic decompression meters": The SOS decompression meter". Diving and Hyperbaric Medicine. 36 (1). Retrieved 2013-03-28.
  73. ↑ Stubbs R.A.; Kidd D.J (1965). "A pneumatic analogue decompression computer". Canadian Institute of Aviation Medicine Report. 65-RD-1. Retrieved 2008-05-02.
  74. ↑ Stubbs R.A.; Kidd D.J (1965). "Control of decompression by analogue computer". Canadian Institute of Aviation Medicine Report. 65-RD-8. Retrieved 2008-05-02.
  75. ↑ Lothar Seveke (1988). "Entwicklung des Tauchcomputers (nur der Technik, nicht der Algorithmen)" (in German). Retrieved 2011-09-16.
  76. 1 2 Huggins, Karl E (1988). "Underwater decompression computers: Actual vs. Ideal". In: Lang, MA (ed). Advances in Underwater Science...88. Proceedings of the American Academy of Underwater Sciences Eighth annual scientific diving symposium. American Academy of Underwater Sciences. Retrieved 2011-11-20.
  77. 1 2 Heinmiller, PA (1989). "ORCA's new Delphi computers: Impact on the diving community". In: Lang, MA; Jaap, WC (ed). Diving for Science…1989. Proceedings of the American Academy of Underwater Sciences annual scientific diving symposium 28 September - 1 October 1989 Wood Hole Oceanographic Institution, Woods Hole, Massachusetts, USA. American Academy of Underwater Sciences. Retrieved 2013-03-28.
  78. 1 2 JJ Luczkovich; MW Sprague (2003). "Noisy Fish and even Louder Divers: Recording Fish Sounds Underwater, with some Problems and Solutions using Hydrophones, Sonobuoys, Divers, Underwater Video and ROVs". In: SF Norton (ed). 2003. Diving for Science...2003. Proceedings of the 22nd Annual Scientific Diving Symposium. American Academy of Underwater Sciences. Retrieved 2009-03-31.
  79. ↑ Butler, Frank K; Southerland, David (2001). "The U.S. Navy decompression computer". Undersea and Hyperbaric Medicine. 28 (4): 213–28. PMID 12153150. Retrieved 2008-05-02.
  80. ↑ Butler, Frank K. (2016). "The U.S. Navy Decompression Computer". www.divecochran.com. Retrieved 19 June 2018.
  81. ↑ "UDI - Underwater Digital Interface". UTC Corporation. 2008. Retrieved 2009-09-14.
  82. 1 2 Staff (1977). "The Diving at Work Regulations 1997". Statutory Instruments 1997 No. 2776 Health and Safety. Kew, Richmond, Surrey: Her Majesty's Stationery Office (HMSO). Retrieved 6 November 2016.
  83. ↑ Staff. "Regulations (Standards - 29 CFR) - Commercial Diving Operations - Standard Number: 1910.401 Scope and application". US Department of Labour. Retrieved 4 March 2017.
  84. 1 2 3 "Diving Regulations 2009". Occupational Health and Safety Act 85 of 1993 – Regulations and Notices – Government Notice R41. Pretoria: Government Printer. Retrieved 3 November 2016 – via Southern African Legal Information Institute.
  85. ↑ AAUS. "The AAUS Standards for Scientific Diving Certification and Operation of Scientific Diving Programs". Retrieved 2008-07-13.
  86. ↑ AAUS. "A brief history of the AAUS exemption". Retrieved 2008-07-13.
  87. ↑ Sharkey, P.; Austin, L. "Federal Regulation Of Scientific Diving: Two Scientific Divers' Perspective". Retrieved 2012-02-01.
  88. ↑ Flemming, N. C.; Max, M. D., eds. (1988), Code of Practice for Scientific Diving: Principles for the Safe Practice of Scientific Diving in Different Environments. UNESCO Technical Papers in Marine Science 53 (PDF), Scientific Committee of Confédération Mondiale des Activités Subaquatiques, Paris: United Nations Educational, Scientific, and Cultural Organization, Div. of Marine Sciences, ISSN 0503-4299, OCLC 18056894, retrieved 8 February 2013
  89. ↑ "Home page". International Diving Schools Association official website. Retrieved 13 September 2013.
  90. ↑ "International Diver Training Certification: Diver Training Standards, Revision 4," (PDF). IDSA. October 2009. Retrieved 13 September 2013.
  91. 1 2 The European Diving Technology Committee, (2010), Minutes of the EDTC meeting held on Sept 10th 2010 in Prague, Czech Republic http://www.edtc.org/PRAG.htm accessed 13 September 2013
  92. ↑ staff (2017). Closed Bell Diver Training V1.0 (Report). International Diving Regulators and Certifiers Forum (IDRCF).
  93. ↑ Department of Labour (11 January 2002). Diving regulations 2001 of the Occupational Health and Safety Act 85 of 1993. Government Gazette, Republic of South Africa. 438. Pretoria: Government Printer.
  94. ↑ Diving Advisory Board (2007). Code of Practice for Commercial Diver Training, Revision 3 (PDF). Pretoria: South African Department of Labour. Retrieved 6 November 2016.
  95. 1 2 Vallintine, R. The Club: A celebration of the history of the British Sub-Aqua Club 1953-2003. Circle Books. ISBN 978-0-9538919-5-5.
  96. 1 2 "The history of CMAS". Confédération Mondiale des Activités Subaquatiques. Retrieved 20 April 2010.
  97. 1 2 "Flamar - Welcome the company". www.flamarmergulho.com. Retrieved 2015-12-07.
  98. 1 2 DAN News (2003-07-17). "PADI CEO & Co-Founder John Cronin Dies at Age 74". Divers Alert Network. Retrieved 2008-09-24.
  99. 1 2 Dugan, James (1965). Man Under the Sea. Collier Books. Library of Congress Number: 64-18390
  100. 1 2 3 4 5 6 Staff (Spring 2008). "NAUI 50 years of diving history and still growing" (PDF). Midwest Scuba Diving. Riverdale, Johnsburg, Illinois.: Derrick Lorenzen, Maximum publications (Spring 2008): 16 to 19.
  101. 1 2 3 4 5 6 7 8 Brylske, Alex (November 2012). The Complete Diver: The History, Science and Practice of Scuba Diving (1st ed.). Parkville, MO: Dive Training Magazine. ISBN 978-0-615-72133-0.
  102. ↑ "Los Angeles County Underwater Program". www.divinghistory.com. Retrieved 2015-12-14.
  103. ↑ "NAUI History". www.naui.org. Archived from the original on 2015-12-22. Retrieved 2015-12-07.
  104. ↑ "Club History". www.laups.org. Retrieved 2015-12-07.
  105. 1 2 BSAC. "Section 1.1 A Brief History of the British Sub-Aqua Club". BSAC. Archived from the original on 6 September 2007. Retrieved 5 September 2008.
  106. ↑ Our L.A. County Lifeguard Family. LACoFD, Lifeguard Operations. ISBN 9780615604763.
  107. ↑ Hollows, Joanne; Bell, David (2012-12-28). Historicizing Lifestyle: Mediating Taste, Consumption and Identity from the 1900s to 1970s. Ashgate Publishing, Ltd. ISBN 9781409490630.
  108. ↑ Means-end Analysis and Values: The Recreational Scuba Consumer. ProQuest. 2007-01-01. ISBN 9780549442462.
  109. ↑ "Nick Icorn - International Legends of Diving - Scuba Sponsored by Portage Quarry". www.internationallegendsofdiving.com. Retrieved 2015-12-07.
  110. ↑ Hanna, Nick (2006). The Art of Diving. Ultimate Sports Publications. p. 107. ISBN 0-9545199-2-2. Archived from the original on September 13, 2011.
  111. ↑ Brennan, Michael (1970). Underwater Swimming. Mayflower Books. pp. 49–52. ISBN 978-0-583-19608-6.
  112. ↑ Brylske, Alex (1994). "Solo Diving: Perspectives on going it alone". Dive Training magazine. Retrieved 5 April 2018.
  113. ↑ "C.M.A.S." Luigi Ferraro's official site. Retrieved 29 March 2013.
  114. ↑ Tillman, Tom. "The history of PADI". Scuba America Historical Foundation. Retrieved 2009-05-23.
  115. ↑ Hamilton Jr RW, Rogers RE, Powell MR (1994). "Development and validation of no-stop decompression procedures for recreational diving: the DSAT recreational dive planner". Tarrytown, NY: Diving Science & Technology Corp. Retrieved 2008-06-16.
  116. ↑ "About IANTD". 2011. Archived from the original on September 2, 2012. Retrieved 1 January 2013.
  117. ↑ "Our story". Technical Diving International. 2015. Retrieved October 21, 2015.
  118. ↑ "All about technical diving". Liquid Edge Diving. Retrieved October 21, 2015.
  119. ↑ Boan, C (January 8, 2001). "Are you ready for trimix?". Dive Magazine. Retrieved August 23, 2008.
  120. ↑ Anttila, Matti (August 25, 2001). "Nitrox diving". Tech Diver. Archived from the original on January 24, 2012. Retrieved June 25, 2012.
  121. ↑ "What is a Rebreather?". Bishop Museum. 1997. Retrieved October 21, 2015.
  122. ↑ Bennett, John (June 9, 2002). "Technical Diving Agencies". Retrieved October 21, 2015.
  123. ↑ "Technical Diving International (TDI)/Scuba Diving International (SDI)". Retrieved June 19, 2012.
  124. ↑ "SDI Launches Solo Diver Course Online". www.tdisdi.com. Retrieved 22 June 2018.
  125. ↑ Allen, C (1996). "BSAC gives the OK to nitrox. reprinted from Diver 1995; 40(5) May: 35-36". South Pacific Underwater Medicine Society Journal. 26 (4). ISSN 0813-1988. OCLC 16986801. Retrieved 5 September 2008.
  126. ↑ Brylske, Alex. "Training Standards: Understanding the "Why" Behind What Divers are Taught". Dive Training magazine. Archived from the original on 27 December 2013. Retrieved 26 January 2016.
  127. ↑ "ANSI Accredited Standards Developers listing" (pdf). American National Standards Institute. p. 150. Retrieved 2015-04-27.
  128. ↑ Richardson, Drew (2000). "Tne RSTC Medical statement and candidate screening model". South Pacific Underwater Medicine Society (SPUMS) Journal. South Pacific Underwater Medicine Society. pp. 210–213. Retrieved 26 January 2013.
  129. ↑ "Dive Standards & Medical Statement". World Recreational Scuba Training Council. Retrieved 26 January 2013.
  130. ↑ "Mission Statement". World Recreational Scuba Training Council. Retrieved 2007-12-07.
  131. ↑ "Recreational diving services — Requirements for the training of recreational scuba divers — Part 1: Level 1 — Supervised diver (ISO 24801-1)". ISO. Retrieved 2017-06-13.
  132. ↑ "Recreational diving services — Requirements for the training of recreational scuba divers — Part 2: Level 2 — Autonomous diver (ISO 24801-2)". ISO. Retrieved 2015-04-29.
  133. ↑ Staff. "Recreational diving services — Requirements for the training of recreational scuba divers — Part 3: Level 3 — Dive leader (ISO 24801-3:2014)". ISO. Retrieved 2015-04-29.
  134. ↑ https://www.iso.org/standard/60464.html
  135. ↑ Bennett, PB (2008). To the Very Depths: A Memoir of Professor Peter B Bennett, Ph.D. Best Publishing Company. p. 229 pages. ISBN 978-1-930536-47-0.
  136. ↑ "History of DAN". Divers Alert Network. Retrieved 10 August 2013.
  137. ↑ Staff. "Our Projects". DAN Europe website. Divers Alert Network Europe. Retrieved 18 February 2016.
  138. ↑ Walker, Douglas (June 2006). "A successor for Project Stickybeak" (PDF). Diving and Hyperbaric Medicine. 36 (2): 110 – via Rubicon Research Repository.
  139. ↑ Lippmann, John (September 2007). "Project Stickybeak and DAN AP dive accident reporting project" (PDF). Diving and Hyperbaric Medicine. 37 (3): 164 – via Rubicon Research Repository.
  140. ↑ Garrod, Brian; Gössling, Stefan, eds. (2008). New Frontiers in Marine Tourism: Diving Experiences, Sustainability, Management. Advances in tourism research. Routledge. ISBN 9780080453576. ISSN 1572-560X.
  141. ↑ "Pirelli Diving Suit". www.therebreathersite.nl.
  142. ↑ Manuale Federale di Immersione - author Duilio Marcante
  143. ↑ "History - Rebreathers Diving Center". www.therebreathersite.nl.
  144. ↑ Marí, Alejandro Sergio. "Pirelli ARO WW II". Therebreathersite.nl (Janwillem Bech).
  145. ↑ "Rebreathers - Rebreather Autorespiratori per l'Immersione Subacquea a recupero di gas". Archived from the original on 2012-07-10.
  146. ↑ Teseo Tesei e gli assaltatori della Regia Marina author Gianni Bianchi Archived October 2, 2011, at the Wayback Machine.
  147. ↑ O'Hara, Vincent P.; Cernuschi, Enrico. "Frogmen against a fleet: The Italian Attack on Alexandria 18/19 December 1941". www.usnwc.edu. Naval War College Review. Archived from the original on 12 February 2017. Retrieved 19 September 2016.
  148. ↑ "Information sheet no 101 - Attack on the Tirpitz" (PDF). www.nmrn-portsmouth.org.uk. National Museum of the Royal Navy. 2014. Retrieved 26 September 2016.
  149. ↑ Hood, Jean, ed. (2007). Submarine. Conway Maritime. pp. 505–506. ISBN 978-1-84486-090-6.
  150. ↑ Shapiro, T Rees (18 February 2011). "Christian J. Lambertsen, OSS officer who created early scuba device, dies at 93". Washington Post. Retrieved 16 May 2011.
  151. ↑ Lambertsen's patent in Google Patents
  152. 1 2 Shapiro, T. Rees (2011-02-19). "Christian J. Lambertsen, OSS officer who created early scuba device, dies at 93". The Washington Post.
  153. ↑ "CIA Special Operations Group - Special Activities Division".
  154. ↑ Isseroff, Ami (2005). "Zionism and Israel - Encyclopedic Dictionary - Shayetet 13". www.zionism-israel.com. Retrieved 12 March 2017.
  155. ↑ Gawrych, George Walter (2000). The Albatross of Decisive Victory: War and Policy Between Egypt and Israel in the 1967 and 1973 Arab-Israeli Wars. Praeger. p. 111. ISBN 978-0313313028.
  156. ↑ "Operation Algeciras: How Argentina planned to attack Gibraltar". newhistories.group.shef.ac.uk. New Histories. 21 May 2011. Retrieved 12 March 2017.
  157. ↑ REPORTS OF INTERNATIONAL ARBITRAL AWARDS : Case concerning the differences between New Zealand and France arising from the Rainbow Warrior affair (PDF). United Nations. 6 July 1986. p. 200. Retrieved 12 March 2017.
  158. ↑ Edwin P. Hoyt (15 June 2011). SEALs at War. Random House Publishing Group. pp. 159–. ISBN 978-0-307-57006-2.
  159. ↑ Don Mann (5 August 2014). How to Become a Navy SEAL: Everything You Need to Know to Become a Member of the US Navy's Elite Force. Skyhorse Publishing. pp. 18–. ISBN 978-1-62873-487-4.
  160. ↑ Farr, Martyn (1991). The Darkness Beckons. London: Diadem Books. ISBN 0-939748-32-0.
  161. ↑ Staff. "Cave Diving Section of the National Speleological Society was founded". cavedivinghistory.com. Retrieved 2009-06-01.
  162. ↑ "Canadian Harvard Aircraft Association Dive Recovery Team". 2008. Archived from the original on 13 June 2015.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.