Fiat 124 Sport Spider

Engines

The four-cylinder engine used in the spider and coupé is a double overhead cam, aluminum crossflow head version of the sedan's pushrod unit. It started in 1966 with a capacity of 1438 cc progressively increasing to 1608 cc in 1970 (although this was reduced to 1,592 cc in 1973), 1,756 cc in 1974 and finally 1,995 cc in 1979. The Fiat twin cam engine was designed by ex-Ferrari engineer Aurelio Lampredi.^[7] Bosch fuel injection replaced the previously used Weber carburetors midway through 1980. In 1981 and 1982, Fiat USA, Inc. partnered with Legend Industries to create approximately 700 turbo models for US markets. There was also a supercharged model called "Volumex" offered toward the end of production, which was sold only in Europe, where it cost 35% more than a regular, fuel-injected Spidereuropa.^{[lower-alpha 1]} This family of engines remained in production into the 1990s giving it one of the longest production runs in automotive history. The double overhead cam (DOHC) version was the first mass manufactured DOHC to utilize reinforced rubber timing belts, an innovation that would come into nearly universal use in the decades after its introduction. Its family powered race cars such as the FIAT 131 Mirafiori, 124 Special T, Lancia Beta Montecarlo, Delta Integrale and many others.

Suspension

Suspension is conventional by unequal length wishbones and coil over damper at the front and by coil sprung live rear axle at the rear which is located by a transverse link (Panhard rod) and two pairs of forward extending radius rods to react to braking and acceleration forces, and to control axle wind-up.

North American model

1981 Fiat 124 Spider 2000 (US)

The coupé and spider were marketed in the US market beginning in 1968. In 1969, the Spider featured four-wheel disc-brakes, double overhead cams, hesitation wipers, steering-column mounted lighting-controls, radial ply tyres and a five-speed manual transmission. An optional three-speed automatic transmission from General Motors was available from 1979 through 1985 for North America as well as Japan. The Spider's convertible top was known for its simplicity of use — allowing a seated driver to quickly raise or lower the top.^[9] When the engine was upgraded to two litres, the model was renamed the Fiat 2000 Spider. For the 1980 model year a version with a catalytic converter and Bosch L-Jetronic fuel injection was introduced for California and optional in the other 49 states. For 1981 this engine, with 102 hp (76 kW), became standard fitment in North America.^[9]

Fiat subsequently stopped marketing the Spider and the X1/9 — to have their marketing assumed by their respective carozzeria.^[4] In Europe, the Ritmo Cabrio was also marketed by Bertone rather than Fiat themselves.^[10] In the US, Fiat turned over marketing and support of the spider and the X1/9 to International Automobile Importers, Inc., headed by Malcolm Bricklin.

Fiat Abarth 124 Rally

Fiat Abarth 124 Rally
Body and chassis
Body style	2-door spider with fixed hardtop
Chronology
Successor	Fiat Abarth 131 Rally

The Fiat Abarth 124 Rally is a street legal rally version of the 124 Sport Spider sold to the masses, known also as "124 Abarth Stradale", introduced in November 1972.^[11][12] Its main purpose was to receive FIA homologation in the special grand touring cars (group 4) racing class, and replace the 1.6-litre Fiat Sport Spider rally cars which were presently being campaigned. At the time 124 had already won the 1972 European Rally Championship at the hands of Raffaele Pinto and Gino Macaluso.^[11] The 124 Rally was added to the Sport Spider range, which included the 1600 and 1800 models; the first 500 examples produced were earmarked for the domestic Italian market.^[12]

Amongst the most notable modifications over the standard spider there were independent rear suspension, engine upgrades, lightweight body panels, and a rigid hard top.

In place of the usual rear solid axle, there is independent suspension from lower wishbones, the original trailing arms, an upper strut and an anti-roll bar. At the front a radius rod on each side was added to the standard double wishbones.

The Abarth-tuned type 132 AC 4.000 1.8-litre, twin-cam engine was brought from the standard 118 to 128 PS DIN (94 kW; 126 hp)^[13] by replacing the standard twin-choke carburettor with double vertical twin-choke Weber 44 IDFs, and by fitting an Abarth exhaust with a dual exit muffler.^[11][12] The 9.8:1 compression ratio was left unchanged.^[12]

The transmission is the all-synchronised five-speed optional on the other Sport Spider models, and brakes are discs on all four corners. Despite the 20 kg (44 lb) four-point roll bar fitted, kerb weight is 938 kg (2,068 lb), roughly 25 kg (55 lb) less than the regular 1.8-litre Sport Spider.^[11]

Engine bonnet, boot lid and the fixed hard top are fibreglass, painted matt black, the rear window is perspex and the doors aluminium. Front and rear bumpers were deleted and replaced by simple rubber bumperettes. A single matte black wing mirror was fitted. Matte black wheel arch extensions house 185/70 VR 13 Pirelli CN 36 tyres on 5.5 J × 13" four-spoke alloy wheels.^[11] Inside centre console, rear occasional seats, and glovebox lid were eliminated; while new features were anodised aluminium dashboard trim, a small three-spoke leather-covered Abarth steering wheel, and Recaro corduroy-and-leather bucket seats as an extra-cost option.^[11] The car carries Fiat badging front and rear, Abarth badges and "Fiat Abarth" scripts on the front wings, and Abarth wheel centre caps. Only three paint colours were available: Corsa red, white, and light blue.^[11]