Telephone numbers in the Republic of Ireland

Irish area codes vary in length, between one and three digits (excluding the leading 0), and subscribers' numbers are between five and seven digits.

As optional local dialling is facilitated, Irish geographic numbers cannot begin with 0 (trunk prefix), 1 (special number prefix) or 999 (emergency services). However, mobile numbers use the full range of digits, as local dialling is not supported on mobile networks, and the area code must always be dialled.

A migration to a standard format, (0xx) xxx xxxx, is in progress; however, to avoid disruption, this process is only being carried out as needed, where existing area codes and local numbering systems have reached full capacity. There is currently no plan to move to a closed numbering system.

Irish geographical numbering is structured on a regional basis and follows a logical hierarchy.

These directory areas correspond approximately to the following geographical regions:

• 01 – Greater Dublin Area
• 02 – Cork
• 04 – Northeast
• 05 – Southeast
• 06 – Midwest and Southwest
• 07 – Northwest
• 09 – West

The Midlands is covered by several regional codes.

Except for the 01 area, each area is further subdivided into smaller areas (NDCs). Usually, the main city or town in the area is 0x1 e.g. 021 (Cork), 061 (Limerick), 091 (Galway).

ComReg maintains a map of area codes here.

Mobile phone numbers start with the prefix 08x and are part of a closed numbering plan, which means that a mobile phone number must have 10 digits. Calls to landlines and other mobiles require the area code on a mobile phone.

New numbers are assigned on prefixes and ranges managed by a specific operator. However, as full mobile number portability has been in operation since 2003, it is no longer possible to reliably identify which network a particular number is on. For example, a newly assigned Three number would begin with 083, but may have been ported to another operator in the meantime.

Mobile phone numbers also have their own voicemail number. To access this, the number 5 should be put after the prefix. For example, the mobile number 08x xxx xxxx has the voicemail number 08x 5 xxx xxxx.

On some networks, when the direct to voicemail number is called, the voicemail greeting for that network is played (e.g. Vodafone, eir Mobile), while others request a phone number followed by the voicemail greeting for that number (e.g. Three). Users can press the hash key (#) to gain access to the voicemail box.

• 1901 – eir
• 1902 – Digiweb
• 1903 – Tesco Mobile
• 1904 – BT Ireland
• 1905 – eir mobile
• 1907 – Vodafone Ireland
• 1908 – Virgin Mobile Ireland
• 1909 and 1913 – Three Ireland
• 1910 – Magnet Networks

• Ambulance
• Garda Síochána
• Fire and rescue
• Irish Coast Guard
• Cliff and mountain rescue

112 can also be contacted by SMS. While the service is open to all users, it is primarily aimed at the deaf community.

Pre-registration is required. Further information can be found at 112.ie.

Irish premium rate telephone numbers start with 15 and are read in two-digit blocks e.g. 1550 is "fifteen fifty".

The rates given below are from ComReg and are indicative only. Please check with your specific telephone service provider for exact rates.

A special 50XXX code is used for free–of–charge SMS.

Premium rate services in Ireland are regulated by ComReg.[2]

• 199000 – reads out your telephone number.

Check which carrier you are using for each category of call:

• 19800 – international calls
• 19822 – local calls
• 19801 – calls to other parts of the Republic of Ireland, Irish mobile numbers and landlines in Northern Ireland.

• 141 – caller ID default override – withhold caller ID on this call
• 142 – caller ID default override – present caller ID on this call
• 1471 – check last missed call. The system will verbally announce details of the last missed call
• #93# – delete missed call information from network memory

• *43# – setup
• *#43# – check status
• #43# – cancel

• R0 – reject call (or send to voicemail) and temporarily suspend call waiting service for this call.
• R1 – answer waiting call and disconnect current call.
• R2 – answer waiting call and place current call on hold/or swap between calls.
• R3 – merge both calls into a three–way call.

• While on a phone call, press the R key on your phone and dial the number you wish to add to the conversation.
• Dial R3 to begin conference/three–way call.
• R2 allows you to separate the calls and swap between them.

• R – places call on hold. Hang up and telephone will ring until call on hold is picked up again.

• *21*(phone number)# – forward all calls to (phone number)
• *#21# – check status
• #21# – deactivate

When this service is active, the dial tone changes to a two–frequency 'siren' tone.

• *55*[time in 4–digit 24h format]# e.g. for 8:30am dial *55*0830#
• *#55# – check status
• #55# – cancel

Most exchanges confirm setup with a verbal announcement, however some exchanges may use a ringing tone to indicate successful service setup and a busy tone to indicate an error/invalid code.

(Codes are unique to the network and do not follow ETSI guidelines)

• 141 – caller ID default override – withhold caller ID on this call
• 142 – caller ID default override – present caller ID on this call
• 1471 – check last missed call. The system will verbally announce details of the last missed call.

• *70 (wait for prompt and enter phone number) – forward all calls to (phone number)
• #70 – deactivate

• *75 – activate when busy
• #75 – deactivate when busy
• *77 – forward if unanswered
• #77 – deactivate if unanswered

• *72 – activate
• #72 – deactivate

• R1 – answer waiting call and disconnect current call.
• R2 – answer waiting call and place current call on hold or swap between calls.

• *90 – activate
• #90 – deactivate

• ##

You will either hear a tone or a voice message to confirm services have been set up or deactivated.

• GSM supplementary service codes – All of Ireland's mobile providers use the standard GSM codes to control special services such as call forwarding, barring, call waiting etc.

• The majority of area codes in County Donegal were merged into the single area code 074, while parts of south Donegal (e.g. Bundoran, Rossnowlagh) were merged into the area code 071. The area codes abolished were 073, 075 and 077. All local numbers became 7–digit.
• Area codes in County Sligo and north County Leitrim were merged into the single area code 071. The area codes abolished were 072, 078 and 079. All local numbers became 7–digit.
• Area codes in parts of counties Galway and Mayo were merged into the single area code 094, including Castlebar, Claremorris, Castlerea and Ballinrobe. The area codes abolished were 0907 and 092. All local numbers became 7–digit.
• Area codes in parts of counties Galway, Offaly, Roscommon and Westmeath were merged into a new area code 090, including Athlone, Ballinasloe, Roscommon and Portumna. The area codes abolished were 0902, 0903, 0905 and 0509. All local numbers became 7–digit.
• Area codes in parts of counties Meath and Offaly were merged into the single area code 046, including Navan, Kells, Trim, Enfield and Edenderry. The 0405 area code was abolished. All local numbers became 7–digit.

• All local numbers with the area code 044 changed from 5–digit to 7–digit. Numbers in the Rochfortbridge minimum numbering area (MNA) were prefixed by 92, in the Mullingar MNA by 93 and the Castlepollard MNA by 96.
• Area codes in counties Laois and Offaly were merged into the single area code 057, including Port Laoise, Birr and Tullamore. The area codes abolished were 0502, 0506 and 0509. All local numbers became 7–digit.
• Area codes in County Wexford and parts of counties Carlow and Wicklow were merged into the single area code 053, including Wexford, Enniscorthy, Ferns and Gorey. The area codes abolished were 054and 055. All local numbers became 7–digit.

• All local numbers with the area code 023 changed from 5–digit to 7–digit. Numbers in the Bandon MNA beginning with 2, 3, 4, 5, 7 and 8 were prefixed by 88, while numbers beginning with 6 were prefixed by 66.
• All local numbers with the area code 043 changed from 5–digit to 7–digit. Numbers in the Longford MNA were prefixed by 33 and in the Edgeworthstown MNA by 66.
• All local numbers with the area code 052 changed from 5–digit to 7–digit. Numbers in the Clonmel MNA were prefixed by 61, in the Cahir MNA by 74 and the Killenaule MNA by 91.
• All local numbers with the area code 064 changed from 5–digit to 7–digit. Numbers in the Killarney MNA were prefixed by 66 and in the Rathmore MNA by 77.

• The area code 0461 for Nobber was merged with the area code 046 in the late 1980s. Numbers were changed from (0461) xxxx to (046) 5xxxx.
• All local numbers with the area code 01 changed from 6–digits to 7–digits in five stages between 1990 and 1994:
  • On 2 April 1990, numbers beginning with 23, 24, 26, 27, 28, 70 and 79 were prefixed with 6.
  • On 8 April 1991, numbers beginning with 8 and 69 were prefixed with 2.
  • On 4 April 1992, numbers beginning with 4 and the remaining 6–digit numbers beginning with 2 were prefixed with 8. Numbers beginning with 95 and 98 were prefixed with 2.
  • On 24 April 1993, numbers beginning with 75, 780, 781, 782, 783 and 784 were prefixed with 4, while numbers beginning with 60, 61, 68, 71, 76, 77, 785and 789 were prefixed with 6, and numbers beginning with 72, 73, 74, 786, 787 and 788 were prefixed with 8.
  • On 16 April 1994, numbers beginning with 3 were prefixed with 8, while numbers beginning with 5 and 9 were prefixed with 4.
• Mobile numbering became 7–digit in the mid–1990s

• All local numbers with the area code 021 changed from 6–digits to 7–digits in two stages between 1998 and 2000.
  • From September 1998, numbers beginning with 40 were prefixed with 2, while numbers beginning with 43 and 33 were prefixed by 7.
  • From February 2000, numbers beginning with 2, 3, 5, 6, 7, 8 or 9 were prefixed with 4.
• All local numbers with the area code 066 changed from 6–digits to 7–digits in 2000.
• The prefix 080 was previously used for calls to Northern Ireland, but this changed to 048 following the Big Number Change in 2000.

All local numbers with the area code 01 are currently 7–digits, but may change to 8–digits in the future, although breaking the city into separate area codes would match the rest of the national system.

A review and public consultation on the future of Ireland's numbering plan was undertaken.[4]

• 16 – former international access code[5]
• 03 – formerly used for calls to the UK. The format was 03 + STD code + local number.[6]
• 08 – formerly used for Northern Ireland landlines
• 084 – formerly used for Belfast landlines[7]

• 10 – national operator assistance (withdrawn in 2007)
• 114 – international operator assistance (withdrawn in 2007)
• 910 – operator-assisted calls to some areas without direct dialling (withdrawn in the early 1980s)
• 1190 – Telecom Éireann national directory assistance (withdrawn in the early 2000s and replaced with 11811, originally 190)
• 1197 – Telecom Éireann UK directory assistance (withdrawn in the early 2000s and replaced with 11818, originally 197)
• 1198 – Telecom Éireann international directory assistance (withdrawn in the early 2000s and replaced with 11818, originally 198)
• 191 – Telecom Éireann repair services (withdrawn in the late 1990s)
• 196 – telemessaging services, whereby callers could ask an operator to send a postcard with a printed message (withdrawn in the late 1990s)

A range of numbers from 192, 193 and 194 were once used for various Telecom Éireann customer service and account service lines.

• 1191 – speaking clock (withdrawn on 27 August 2018)

• before 2000: 08 followed by Northern Irish area code and phone number e.g. Belfast (01232) xxx xxx was reached by dialling 08 01232 xxx xxx.

Belfast could previously be reached by dialling 084 in place of the UK area code 0232.[7]

Until the early 1990s, the 03 numbering range was originally used for calls to Great Britain,[8] including the Channel Islands and the Isle of Man, with the Irish prefix 030 replacing the UK trunk code 0.[6]

Calls to British cities using the director telephone system were also possible using shorter codes:

• 031 – London (01)[9]
• 032 – Birmingham (021)[10]
• 033 – Edinburgh (031)[10]
• 034 – Glasgow (041)[10]
• 035 – Liverpool (051)[10]
• 036 – Manchester (061)[10]

031 was replaced with 03071[11] and 03081[12] when 01 was split into the area codes 071 and 081 in 1990.

Use of 03 for this purpose was discontinued in 1993, when the international access code changed from 16 to 00, with calls to Great Britain (but not Northern Ireland) requiring the country code +44 and the area code in full.[13]