RENFE Class 490

The RENFE Class 490, also known as the ETR 490, is an electric multiple unit constructed by Alstom and Fiat Ferroviaria and operated by Spanish rail company Renfe Operadora on its Alaris long-distance services.[1] Since the introduction of the Alaris service, only ETR 490 units have been used for this service. Therefore, these trainsets are often known as Alaris themselves. The units were the first actively tilting units to go into regular service in Spain.[2]

RENFE Class 490
RENFE Class 490 Alaris at Tarragona.
In service1999-2014
ManufacturerAlstom and Fiat Ferroviaria
Constructed1998–99
Refurbished2006–07
Number built10
Capacity160
Operator(s)Renfe Operadora
Line(s) servedMadrid–Valencia
(among others)
Specifications
Train length79.40 m (260 ft 6 in)
Width2.92 m (9 ft 7 in)
Height3.853 m (12 ft 7.7 in)
Maximum speed220 km/h (140 mph)
Weight159 t (156 long tons; 175 short tons)
Traction system4 asynchronous three-phase electric motors
Power output2,040 kW (2,740 hp)
Electric system(s)3 kV DC Catenary
Current collection methodPantograph
UIC classification1AoAo1+2'2'+1AoAo1
Track gauge1,668 mm (5 ft 5 2132 in) Iberian gauge

Unlike other members of the Pendolino rail family, the ETR 490 trainset is composed of only three cars: two motors vehicles, with driving cabs, and a trailer vehicle in the centre. Its motor system is similar to that of an electric multiple unit because its pantograph is not located on a locomotive. The motor cars on either end of the train contain a pair of motor bogies, with one asynchronous motors per bogie.[2] Static and other converters are also located underneath the motor cars.

The central passenger car is divided into two spaces: half is passenger seating while the other part is a bar and restaurant. A section of this car is also dedicated to people with mobility and accessibility impairments. The dimensions of the ETR 490 are reduced compared to its Italian model. These dimensions favour aerodynamic stability and speed. The cars are also built out of lighter materials that allow the train to move faster and put less stress on the tracks. The power consumption of the Alaris trainset is considerably less than the Italian ETR 460, almost reduced by one third.

The tilting mechanism of the ETR 490 is quite similar to that of the second and third generation Pendolino series, controlled by gyroscopes, devices measuring oscillation, and speedometres. The tilt is limited to eight degrees when fully activated when compared to a horizontal surface. Disk brakes control pneumatic and rheostatic braking.

References

  1. Alaris, Renfe, retrieved 24 June 2010.
  2. Automotor eléctrica 490 Alaris, Vía Libre, retrieved 24 June 2010. (in Spanish)


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.