Heighington railway station

The station is unmanned and has a card-only ticket machine, so all passengers wanting to buy tickets with cash must buy on board the train or prior to travel. The amenities here were improved as part of the Tees Valley Metro project in 2013. The package for this station included new fully lit waiting shelters, renewed station signage, digital CIS displays and the installation of CCTV (all of the Tees Valley line stations apart from Teesside Airport and British Steel Redcar have been upgraded and provided with CIS displays).[6] The long-line public-address system (PA) has been renewed and upgraded with pre-recorded train announcements. Running information can also be obtained by telephone and timetable poster boards. Step-free access is available to both platforms via ramps from the crossing.[7]

The station lies on the route of the Stockton and Darlington Railway (S&D), the first public railway. It was here in 1825 that Locomotion No. 1 designed by George Stephenson was placed on the track prior to first journey.[8] Once it was placed on the line and all was ready, it was found that nobody had means of lighting the boiler. Stephenson sent a messenger to get a lit lantern. However, at this point a navvy called Robert Metcalf stepped forward and offered use of his "burning glass" (a piece of glass similar to a magnifying glass) which he used to light his pipe. It was with this that Stephenson was able to light the boiler for that first journey.[9]

The main line of the S&D was opened on 27 September 1825 from Phoenix Colliery at Etherley to Stockton,[10] and this station was opened the same day, being originally named Aycliffe Lane. It was subsequently renamed three times: first to Aycliffe and Heighington, later, on 1 July 1871, it became Aycliffe, although this name lasted for just over three years, because on 1 September 1874 it gained the present name of Heighington.[11]

The signal box at Heighington Station

The grade II listed signal box was opened 1872 and was originally commissioned by the North Eastern Railway Central Division. It is one of the earliest signal boxes in the country still in existence and it is believed that at the most only four pre-date it. The design was possibly by Thomas Prosser, the company's architect. The building fits the earliest Central Division design which the Signalling Study Group classified the design as Type C1.[8]

The original signal lever frame mechanism was replaced 1906. At the time of its inspection prior to gaining listed status in 2007 this 1906 mechanism was still in use. The lever frame was extended around 1912. The extension to both mechanism and building is believed to have been done in order to fit signalling controls for a new electrified line. The lever system was to the current 11 levers in 1987.[8]

On the opposite side of the railway line are the original station buildings dating from around 1826-27[8] or 1835[12] depending on source. The original design called for a public house which would act as a waiting room. Although the buildings no longer form part of the modern station the pub is still in use, called the Locomotion Number 1.[8][13] A cobbled area outside of the pub is believed to be part of the original 1825 station platform.[12]

• On 1 July 1828, the boiler of Locomotion No. 1 exploded, killing the driver.[14]

Northern Trains Route 3: Bishop & Tees Valley Lines
Bishop Auckland Shildon Newton Aycliffe Heighington North Road East Coast Main Line to Edinburgh Darlington East Coast Main Line to London King's Cross Dinsdale Teesside Airport Allens West Northallerton to Eaglescliffe Line Eaglescliffe Durham Coast Line to Newcastle Thornaby Middlesbrough Esk Valley Line to Whitby South Bank British Steel Redcar Redcar Central Redcar East Longbeck Marske Saltburn
There are currently no trains calling at British Steel Redcar until further notice.

The station has a basic hourly service each way on weekdays (improved from two-hourly off peak at the December 2017 timetable change). The service is also hourly on Sundays. Trains usually run through to Saltburn, though there is one departure each weekday to Nunthorpe.[15]

The new Hitachi Intercity Express Programme train assembly plant was built not far from the station in the Aycliffe Business Park and opened in 2015.[16] Work commenced on the £82 million facility in March 2014 and it was officially opened on 3 September 2015 by UK Prime Minister David Cameron.[17] The factory has a rail connection to the running line controlled from the station signal box to allow for delivery of the new sets once completed (there are also 4.3 miles (7 km) of sidings and a 0.62 mi (1 km) long electrified test track within the plant).[18] The new class 800/801 IEP sets will be built or fitted out here for use on the East Coast Main Line and Great Western Main Line, along with class 385 (AT200) commuter EMUs destined for use on Scottish suburban routes around Glasgow and Edinburgh.[19]

• Bishop Line

Preceding station		National Rail		Following station
North Road		Northern Trains Tees Valley Line		Newton Aycliffe
	Historical railways
Darlington North Road Line and station open		North Eastern Railway Stockton & Darlington Railway		Shildon Line and station open