Clair–Fort Kent Bridge

The Clair–Fort Kent Bridge is a steel truss bridge crossing the Saint John River between Clair, New Brunswick in Canada and Fort Kent, Maine in the United States.

Clair – Fort Kent Bridge
Clair – Fort Kent Bridge During April 2008 Flood
Coordinates	47°14′57.3″N 68°36′13.6″W
Carries	US 1 / SR 161 and Route 205
Crosses	Saint John River
Locale	Canada–United States border
Owner	State Highway Agency
Maintained by	State Highway Agency
ID number	2398
Characteristics
Design	Truss - Thru
Material	steel beams
Total length	221.93 m (728.1 ft)
Width	12.2 m
No. of spans	3
Load limit	M 18
Clearance above	1.5 m
History
Construction start	1929
Construction end	1930
Replaces	cable ferry, cable suspension footbridge
Statistics
Daily traffic	958 (2010)

The bridge handles approximately 279,490 vehicle crossings per year and forms a border crossing on the International Boundary. It connects with Route 205 in New Brunswick and Route 161 and U.S. Route 1 (US 1) in Maine, also forming the northern terminus of US 1.

Since it is an international bridge, the Canadian portion of the structure is the responsibility of the Province of New Brunswick, while the American portion is operated by the State of Maine. The bridge was built in 1929–30 as a replacement for an existing cable ferry and a cable suspension footbridge. The bridge has three steel through-truss spans of 73.15 m (240.0 ft) each for a total length of 221.93 m (728.1 ft).

In 1995, the first pier from the New Brunswick abutment had major repairs done. In 1997, the steel members under the deck in the first 1.5 spans from the New Brunswick end were sandblasted, and then painted with a primer of inorganic zinc. In the same year, the downstream exterior stringers in these 1.5 spans were replaced. In 1998, the downstream concrete curb in the first 1.5 spans from the New Brunswick end was replaced. In 2000, the New Brunswick end concrete abutment underwent a major restoration.