3,4-Ethylenedioxythiophene

3,4-Ethylenedioxythiophene
Names
Other names
2,3-dihydrothieno[3,4-b]-1,4-dioxin
Identifiers
Properties
C6H6O2S
Molar mass 142.17 g·mol−1
Appearance colorless liquid
Density 1.331 g/mL
Boiling point 193 °C (379 °F; 466 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

3,4-Ethylenedioxythiophene (EDOT) is the organosulfur compound with the formula C2H4O2C4H2S. The molecule consists of thiophene, substituted at the 3 and 4 positions with an ethylene glycolyl unit. It is a colorless viscous liquid. It is the precursor to the polymer PEDOT, which is found in electrochromic displays, photovoltaics, electroluminescent displays, printed wiring, and sensors.[1][2]

Synthesis and polymerization

EDOT is often prepared from C4 precursors such as butanediol and butadiene via routes that produce the thiophene and dioxane rings in separate steps. Representative is the reaction of 2,3-butanedione, trimethylorthoformate, and ethylene glyocol to form the dioxane. Sulfidization with elemental sulfur gives the bicyclic target.[3]

EDOT is converted into the conducting polymer PEDOT by oxidation. The mechanism for this conversion begins with production of the radical cation [EDOT]+, which attacks a neutral EDOT molecule followed by deprotonation. Further similar steps result in the dehydropolymerization. The idealized conversion using peroxydisulfate is shown

n C2H4O2C4H2S + n (OSO3)22− → [C2H4O2C4S]n + 2n HOSO3

For commercial purposes, the polymerization is conducted in the presence of polystyrenesulfonate.[2]

References

  1. Groenendaal, L. B.; Jonas, F.; Freitag, D.; Pielartzik, H.; Reynolds, J. R. (2000). "Poly(3,4-Ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future". Adv. Mater. 12: 481–494. doi:10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C.
  2. 1 2 Kirchmeyer, S.; Reuter, K. (2005). "Scientific Importance, Properties and Growing Applications of Poly(3,4-Ethylenedioxythiophene)". J. Mater. Chem. 15: 2077–2088. doi:10.1039/b417803n.
  3. Hachiya, I.; Yamamoto, T.; Inagaki, T.; Matsumoto, T.; Takahashi, A.; Mizota, I.; Shimizu, M. (2014). "Two-Step Synthesis of 3,4-Ethylenedioxythiophene (EDOT) from 2,3-Butanedione". Heterocycles. 88: 607–612. doi:10.3987/COM-13-S(S)8.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.