Tallow

The composition of the fatty acids is typically as follows:[4]

• Saturated fatty acids:
  • Palmitic acid (C16:0): 26%
  • Stearic acid (C18:0): 14%
  • Myristic acid (C14:0): 3%
• Monounsaturated fatty acids:
  • Oleic acid (C18-1, ω-9): 47%
  • Palmitoleic acid (C16:1): 3%
• Polyunsaturated fatty acids:
  • Linoleic acid: 3%
  • Linolenic acid: 1%

An 1883 ad soliciting tallow from butchers and graziers for soap production in the Hawaii newspaper The Daily Bulletin

Many items of traditional goods are produced from tallow, which was widely available domestically. Tallow used to be used commonly in high-end shaving soaps, in particular those of elite British firms such as Geo. F Trumper, Truefitt & Hill, and Taylor of Old Bond Street. While these firms have reformulated to a vegetable base, tallow-based shaving soaps have enjoyed a resurgence in recent years with the gaining popularity of traditional wet-shaving. Makers exist in Turkey, Italy, and the United States, including artisanal brands Williams and Nod Hill.

A significant use of tallow is for the production of shortening. It is also one of the main ingredients of the Native American food pemmican. With a smoke point of 480 F/250 C, tallow is traditionally used in deep frying and was preferred for this use until the rise in popularity of plant oils for frying. Before switching to pure vegetable oil in 1990,[6] McDonald's cooked its French fries in a mixture of 93% beef tallow and 7% cottonseed oil.[7] According to a 1985 article in the New York Times, tallow was also used for frying at Burger King, Wendy's, Hardee's, Arby's, Dairy Queen, Popeyes, and Bob's Big Boy.[8] Tallow is however making a coming back in certain nutrition circles.[9]

Greaves (also graves) or cracklings is the fibrous matter remaining from rendering,[1] typically pressed into cakes and used for animal feed, especially for dogs and hogs, or as fish bait.[10] In the past, it has been both favored and shunned in dog food;[2][3] today it is widely found in both wet and dry commercial feeds.

Tallow can be used for the production of biodiesel in much the same way as oils from plants are currently used.[11] Because tallow is derived from animal by-products, which have little to no value to commercial food industries, it avoids some of the food vs fuel debate.

The United States Air Force has experimented successfully with the use of beef tallow in aviation biofuels. During five days of flight testing from August 23 to 27, 2010, at Edwards Air Force Base, California, a U.S. Air Force C-17 Globemaster III flew using JP-8 conventional jet fuel in three of its engines and a 50/50 blend of JP-8 and HRJ biofuel made from beef tallow in one engine on August 23, followed by a flight with the same 50/50 blend in all four engines on August 24. On August 27, it flew using a blend of 50% JP-8, 25% HRJ, and 25% coal-based fuel made through the Fischer–Tropsch process, becoming the first United States Department of Defense aircraft to fly on such a blend and the first aircraft to operate from Edwards using a fuel derived from beef tallow.[12]

Tallow also has a use in printmaking, where it is combined with bitumen and applied to metal print plates to provide a resistance to acid etching.

The use of trace amounts of tallow as an additive to the substrate used in polymer banknotes came to light in November 2016. Notes issued in 24 countries including Canada, Australia, and the United Kingdom were found to be affected, leading to objections from vegans and members of some religious communities.[13][14]

Tallow once was widely used to make molded candles before more convenient wax varieties became available—and for some time after since they continued to be a cheaper alternative. For those too poor even to avail themselves of homemade, molded tallow candles, the "tallow dip"—a reed that had been dipped in melted tallow or sometimes a strip of burning cloth in a saucer of tallow grease—was an accessible substitute. Such a candle was often simply called a "dip" or, because of its low cost, a "farthing dip"[15] or "penny dip".[16]

Early in the development of steam-driven piston engines, the hot vapors and liquids washed away most lubricants very quickly. It was soon found that tallow was quite resistant to this washing. Tallow and compounds including tallow were widely used to lubricate locomotive and steamship engines at least until the 1950s. (During World War II, the vast fleets of steam-powered ships exhausted the supply, leading to the large-scale planting of rapeseed because rapeseed oil also resisted the washing effect.) Tallow is still used in the steel rolling industry to provide the required lubrication as the sheet steel is compressed through the steel rollers. There is a trend toward replacing tallow-based lubrication with synthetic oils in rolling applications for surface cleanliness reasons.[17]

Another industrial use is as a lubricant for certain types of light engineering work, such as cutting threads on electrical conduit. Specialist cutting compounds are available, but tallow is a traditional lubricant that is easily available for cheap and infrequent use.

The use of tallow or lard to lubricate rifles was the spark that started the Indian Mutiny of 1857. To load the new Pattern 1853 Enfield Rifle, the sepoys had to bite the cartridge open. It was believed that the paper cartridges that were standard issue with the rifle were greased with lard (pork fat), which was regarded as unclean by Muslims, or tallow (cow fat), which is incompatible with Hindu dietary laws. Tallow, along with beeswax, was also used in the lubricant for American Civil War ammunition used in the Springfield rifled musket. A combination of mutton tallow, paraffin wax and beeswax is still used as a patch or projectile lubricant in present-day black powder arms.

Tallow is used to make a biodegradable motor oil by a Stamford, Connecticut–based company called Green Earth Technologies.[18]

Tallow finds a number of uses in woodworking. It can serve as a lubricant and rust inhibitor on tools such as saw blades and cast-iron plane bodies. It can also be helpful with screwing fixings into hardwoods, particularly when brass screws are employed. For this purpose, a mixture of about half tallow and half beeswax is best. The wax and tallow are melted over a low flame, mixed and allowed to cool and solidify. This reduces the risk of screw breakage during initial screw penetration and also eases later screw removal should this be required, by preventing corrosion.

Historically, animal tallow has been used in salves and ointments against intertrigo and sore skin: pork (Latin Sevum porcinum), beef (S. bovinum), deer (S. cervinum, German Hirschtalg), goat (S. hircinum), and mutton (S. ovillum).

Tallow can be used as flux for soldering.[19]