South African Class 6E1, Series 8

The South African Railways Class 6E1, Series 8 of 1979 was an electric locomotive.

South African Class 6E1, Series 8
E1973 leading the Premier Classe at Stikland, Cape Town, 17 November 2006
Type and origin
Power typeElectric
DesignerUnion Carriage & Wagon
BuilderUnion Carriage & Wagon
ModelUCW 6E1
Build date1979-1981
Total produced105
Rebuilder♠ Transwerk
Transnet Rail Engineering
Rebuild date♠ 1993-1994 - 2000-2013
Number rebuilt♠ 58 known to Class 17E
100 to Class 18E, Series 1 & 2
Specifications
Configuration:
  AARB-B
  UICBo'Bo'
  CommonwealthBo-Bo
Gauge3 ft 6 in (1,067 mm) Cape gauge
Wheel diameter1,220 mm (48.03 in)
Wheelbase11,279 mm (37 ft 0 in)
  Bogie3,430 mm (11 ft 3 in)
Pivot centres7,849 mm (25 ft 9 in)
Panto shoes6,972 mm (22 ft 10 12 in)
Length:
  Over couplers15,494 mm (50 ft 10 in)
  Body14,631 mm (48 ft 0 in)
Width2,896 mm (9 ft 6 in)
Height:
  Pantograph4,089 mm (13 ft 5 in)
  Body height3,937 mm (12 ft 11 in)
Axle load22,226 kg (49,000 lb)
Adhesive weight88,904 kg (196,000 lb)
Loco weight88,904 kg (196,000 lb)
Electric system/s3 kV DC catenary
Current pickup(s)Pantographs
Traction motorsFour AEI-283AY
  Rating 1 hour623 kW (835 hp)
  Continuous563 kW (755 hp)
Gear ratio18:67
Loco brakeAir & Regenerative
Train brakesAir & Vacuum
CouplersAAR knuckle
Performance figures
Maximum speed113 km/h (70 mph)
Power output:
  1 hour2,492 kW (3,342 hp)
  Continuous2,252 kW (3,020 hp)
Tractive effort:
  Starting311 kN (70,000 lbf)
  1 hour221 kN (50,000 lbf)
  Continuous193 kN (43,000 lbf) @ 40 km/h (25 mph)
Career
OperatorsSouth African Railways
Spoornet
Transnet Freight Rail
Passenger Rail Agency of South Africa
ClassClass 6E1
Number in class105
NumbersE1896-E2000
Delivered1979-1981
First run1979

Between 1979 and 1981, the South African Railways placed 105 Class 6E1, Series 8 electric locomotives with a Bo-Bo wheel arrangement in mainline service.[1]

Manufacturer

The 3 kV DC Class 6E1, Series 8 electric locomotive was designed and built for the South African Railways (SAR) by Union Carriage & Wagon (UCW) in Nigel, Transvaal. The electrical equipment was supplied by the General Electric Company (GEC).[2]

Between 1979 and 1981, 105 locomotives were delivered, numbered in the range from E1896 to E2000. Like Series 6 and 7, the Series 8 units were equipped with AEI-283AY traction motors. UCW did not allocate builder’s or works numbers to the locomotives it built for the SAR, but used the SAR unit numbers for their record keeping.[1]

Characteristics

Orientation

These dual cab locomotives had a roof access ladder on one side only, just to the right of the cab access door. The roof access ladder end was marked as the no. 2 end. A corridor along the centre of the locomotive connected the cabs which were identical apart from the fact that the handbrake was located in cab 2. A pantograph hook stick was stowed in a tube mounted below the lower edge of the locomotive body on the roof access ladder side. The locomotive had one square and two rectangular access panels along the lower half of the body on the roof access ladder side and only one square access panel on the opposite side.[1]

Series identifying features

Hatch door R
Hatch door L

The Class 6E1 was produced in eleven series over a period of nearly sixteen years. While some of the Class 6E1 series are visually indistinguishable from their predecessors or successors, some externally visible changes did occur over the years.[1]

Series 8 was the only Class 6E1 series with unique visual distinguishing features. It could be distinguished from all earlier series by its large hatch door on each side, below the second small window to the right of the side door on the roof access ladder side and below the first window immediately to the right of the side door on the other side. It could also be distinguished from all subsequent series by the absence of rainwater drainage holes along the lower body sides.[1]

Crew access

The Class 5E, 5E1, 6E and 6E1 locomotives were notoriously difficult to enter from ground level since their lever-style door handles were at waist level when standing inside the cab. This made it impossible to open the door from outside without first climbing up high enough to reach the door handle while hanging on to the side handrails with one hand only. Crews therefore often choose to leave the doors ajar when parking and exiting the locomotives.[3]

Series 8 and some late model Series 7 locomotives were equipped with doors on which the outside door latch handle was mounted near floor level with a simple drawer pull type handle at mid-door level.[4]

Service

The Class 6E1 family saw service all over both 3 kV DC mainline and branch line networks, the smaller Cape Western mainline between Cape Town and Beaufort West and the larger network which covers portions of the Northern Cape, the Free State, Natal, Gauteng, North West and Mpumalanga.[5]

Reclassification and rebuilding

Reclassification to Class 16E

During 1990 and 1991, Spoornet semi-permanently coupled several pairs of otherwise largely unmodified Class 6E1 locomotives, reclassified them to Class 16E and allocated a single locomotive number to each pair, with the individual units in the pairs inscribed "A" or "B". The aim was to accomplish savings on cab maintenance by coupling the units at their no. 1 ends, abandoning the no. 1 end cabs in terms of maintenance and using only the no. 2 end cabs. Most were later either disbanded with the units reverting to Class 6E1 and regaining their original numbers or getting rebuilt to Class 18E.[5]

Ten known Series 8 locomotives were part of such Class 16E pairs.[5]

  • E1914 and E1915 became 16-503 A and B.
  • E1916 and E1917 became 16-501 A and B.
  • E1918 and E1919 became 16-505 A and B.
  • E1925 and E1926 became 16-504 A and B.
  • E1928 and E1929 became 16-506 A and B.

Modification to Class 17E

No. E1913 as Class 17E, Capital Park, Pretoria, 28 September 2006

Class 17E locomotives were modified and reclassified from Class 6E1 Series 7, 8 or 9 locomotives during 1993 and 1994. Key modifications included improved regenerative braking and wheel-slip control to improve their reliability on the steep gradients and curves of the Natal mainline. Unlike the unmodified but reclassified Class 16E locomotives, the Class 17Es retained their original unit numbers after reclassification.[5]

A stumbling block was that the regeneration equipment at many of the sub-stations along the route was unreliable. Since there was no guarantee that another train would be in the same section to absorb the regenerated energy, there was always the risk that line voltage could exceed 4.1 kV, which would make either the sub-station or the locomotive trip out. As a result, the subsequently rebuilt Class 18E locomotives were not equipped with regenerative braking.[6]

Fifty-five known Series 8 locomotives were modified and reclassified to Class 17E. Their unit numbers are listed in the table.[5]

Rebuilding to Class 18E

Cab 1 of Class 18E no. 18-204, ex Class 6E1 no. E1972, Capital Park, Pretoria, 16 May 2013

Beginning in 2000, Spoornet began a project to rebuild Series 2 to 11 Class 6E1 locomotives to Class 18E, Series 1 and Series 2 at the Transnet Rail Engineering workshops at Koedoespoort. In the process the cab at the no. 1 end was stripped of all controls and the driver's front and side windows were blanked off to have a toilet installed, thereby forfeiting the locomotive's bi-directional ability.[5][6]

Brake rack in Class 18E no. 18-089

Since the driving cab's noise level had to be below 85 decibels, cab 2 was selected as the Class 18E driving cab primarily based on its lower noise level compared to cab 1, which was closer and more exposed to the compressor's noise and vibration. Another factor was the closer proximity of cab 2 to the low voltage switch panel. The fact that the handbrake was located in cab 2 was not a deciding factor, but was considered an additional benefit.[6]

While the earlier Class 6E1, Series 2 to 7 locomotives had been built with a brake system which consisted of various valves connected to each other with pipes and commonly referred to as a "bicycle frame" brake system, the Class 6E1, Series 8 to 11 locomotives were built with an air equipment frame brake system, commonly referred to as a brake rack. Since the design of the rebuilt Class 18E locomotives included the same brake rack, the rebuilding project was begun with the newer series 8 to 11 locomotives to reduce the overall cost of rebuilding. [6]

Bar two, all the Class 6E1, Series 8 locomotives which were used in this rebuilding project were rebuilt to Class 18E, Series 1 locomotives. The known numbers and renumbering details are listed in the table.[6]

Liveries

All but eight Class 6E1, Series 8 locomotives were delivered in the SAR Gulf Red livery with signal red cowcatchers, yellow whiskers and with the number plates on the sides mounted on three-stripe yellow wings. The eight exceptions, numbers E1950 to E1957, were delivered in blue with yellow whiskers for use with the Blue Train between Cape Town and Beaufort West. In the 1990s many of the Series 8 units began to be repainted in the Spoornet orange livery with a yellow and blue chevron pattern on the cowcatchers. Some later received the Spoornet maroon livery while numbers E1950 to E1957 and no. E1973 were repainted in either the Spoornet orange era or maroon era blue train livery. In the Passenger Rail Agency of South Africa (PRASA) era after 2008, no. E1950 was first repainted in the Shosholoza Meyl purple livery and later in the PRASA blue livery.[7]

The main picture shows both versions of the Spoornet Blue Train livery. The leading locomotive, no. E1973, is in the orange era livery with the name "SPOORNET" below the emblem on the side, while the trailing locomotive, no. E1951, is in the maroon era livery without the name "SPOORNET" below the emblem on the side.[8][9]

Four of the Blue Train locomotives were damaged on 24 April 1997 when train numbers 81007 and 18008, two Trans-Karoo passenger trains, collided at Gouda. The four damaged locomotives were later replaced by eight Class 6E locomotives which were repainted in blue.[5]

Of the four damaged blue locomotives, numbers E1953 and E1956 were scrapped while numbers E1954 and E1955 were rebuilt to the first two Class 18E locomotives in 2000 and 2001, numbered 18-001 and 18-002 respectively.[5]

Illustration

References

  1. South African Railways Index and Diagrams Electric and Diesel Locomotives, 610mm and 1065mm Gauges, Ref LXD 14/1/100/20, 28 January 1975, as amended
  2. "UCW - Electric locomotives" (PDF). The UCW Partnership. Archived from the original (PDF) on 12 October 2007. Retrieved 30 September 2010.
  3. E1882 with high mounted door handle
  4. E1898 with low mounted door handle
  5. Railways of Southern Africa Locomotive Guide, 2002 Edition, (Compiled by John N. Middleton), p57, as amended by Combined Amendment List 4, January 2009
  6. Information gathered from the rebuild files of individual locomotives at Transnet Rail Engineering’s Koedoespoort shops, or obtained from John Middleton as well as several Transnet employees
  7. Soul of A Railway, System 7, Western Transvaal, based in Johannesburg, Part 9. South-Eastwards as far as Volksrust (2nd part) by Les Pivnic. Caption 4. (Accessed on 11 April 2017)
  8. E1973 in blue based on orange livery
  9. E1951 in blue based on maroon livery

Media related to South African Class 6E1 Series 8 at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.