Elder Mill, Romiley

Elder Mill, Romiley was a cotton spinning mill in Romiley, Stockport, Greater Manchester. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964.

Elder
Location within Greater Manchester
Cotton
Spinning (ring mill)
LocationRomiley, Marple
Serving canalPeak Forest Canal
Further ownership
Coordinates53.4114°N 2.0963°W / 53.4114; -2.0963
Power
Engine makerDaniel Adamson
Engine type600hp
Valve Gearvertical cross compound engine
rpm106
Flywheel diameter16ft
References
[1] [2]

Location

Romiley, or Chadkirk is a village within the Metropolitan Borough of Stockport, in Greater Manchester, England, located 7.9 miles (12.7 km) south east of Manchester, 5.1 kilometres (3.2 mi) east of Stockport and 4 kilometres (2.5 mi) south of Hyde. It comprises 1,089 acres (4.41 km2); the surface is undulated, the soil clay, with a little sand. Coal is found at a great depth, but is not wrought; and there is a stone-quarry. Several large cotton-mills are in operation. The River Etherow here took the name of the River Mersey though today it is considered that the Etherow is a tributary of the River Goyt. The Peak Forest Canal and the Sheffield and Heybridge tramway, passed through the area. [3] Elder mill was situated by the Peak Forest Canal near the Hatherlow Mills.

History

This stretch of the Goyt, shares much of it history with Stockport whose textile tradition started with the silk industry in the late 17th Century. By the 18th century the manufacture of silk was dominating the economic life of the town. Large silk mills, such as Carrs Mill, Park Mill and Adlington Square Mill, became the major employers of the town. By 1769 nearly 2,000 people were employed in the town's silk trade. In 1772 the silk industry was in depression and the town turned to cotton.[4] Chadkirk was known for bleaching, where finished cloth was left stretched over tenter frames over the landscape. It was bleached by the sun. Clues to this activity can be found in the place names; place names such as whitehill or whitefield. Though an important early milltown Stockport was very late in embracing the joint stock limited liability company boom. The first mill to be financed by that method was Vernon Mill. Elder Mill was such a late nineteenth century mill.

The industry peaked in 1912 when it produced 8 billion yards of cloth. The Great War of 1914–1918 halted the supply of raw cotton, and the British government encouraged its colonies to build mills to spin and weave cotton. The war over, Lancashire never regained its markets. The independent mills were struggling. The Bank of England set up the Lancashire Cotton Corporation in 1929 to attempt to rationalise and save the industry.[5] Elder Mill, Romiley was one of 104 mills bought by the LCC, and one of the 53 mills that survived through to 1950.

Architecture

Power

Elder Mill was powered by a 600 hp (450 kW) vertical cross compound engine by Daniel Adamson, installed in 1937. It had a 3 ft (0.91 m) stroke. It ran at 106 rpm. The flywheel was 16 ft (4.9 m). [6]

Equipment

Later extensions

Usage

Owners

  • Lancashire Cotton Corporation (1930s-1964)
  • Courtaulds (1964- )

Tenants

Notable events/media

See also

References

  1. LCC 1951
  2. Roberts, A S (1921). "One guy from Barlick-Book Transcription". ARTHUR ROBERT'S BLACK BOOK. Archived from the original on 23 July 2011. Retrieved 11 January 2009.
  3. http://www.british-history.ac.uk/report.aspx?compid=51243
  4. "The mills are gone but they have left a legacy of industry". Stockport Express. 11 November 2002.
  5. Dunkerley 2009
  6. Roberts 1921

Notes

Bibliography

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.