Martin 16

Martin 16
Development
Designer Don Martin
Location Canada
Year 1995
No. built 113
Builder(s) Martin Yachts, Abbott Boats, KAPE Boatworks
Boat
Boat weight 730 lb (331 kg)
Hull
Type Monohull
Construction Fiberglass
LOA 16.00 ft (4.88 m)
LWL 16.00 ft (4.88 m)
Beam 4.33 ft (1.32 m)
Hull draft 3.33 ft (1.01 m) with keel down
Engine type none
Hull appendages
Keel/board type lifting keel
Ballast 330 lb (150 kg)
Rudder(s) transom-mounted rudder
Rig
General Fractional rigged sloop
Sails
Total sail area 100 sq ft (9.3 m2)

The Martin 16 is a Canadian trailerable sailboat, that was designed by Don Martin of Vancouver, British Columbia, specifically as a boat for disabled sailors. It was first built in 1995.[1][2]

Production

The boat was first built in 1995 by Martin Yachts, who completed 58 examples. Production then passed to Abbott Boats in Sarnia, Ontario, Canada, who built a further 55 boats. The original molds were destroyed in a fire in 2006, but a new set were built in 2009 and production was restarted by KAPE Boatworks of Mississauga, Ontario. The design remained in production in 2018.[1][3][4][5]

Design

Martin 16

The Martin 16 is a small recreational keelboat, built predominantly of fiberglass. It has a fractional sloop rig, a transom-hung rudder and a lifting weighted bulb keel. It displaces 730 lb (331 kg) and carries 330 lb (150 kg) of lead ballast. Both the mainsail and the jib are mounted with booms. It can fly a spinnaker of 194 sq ft (18.0 m2).[1][6]

Martin 16 sailors sit on a seat facing forward and all controls and lines are led to the cockpit to allow sailing without having to leave the seat. The rudder is controlled with a joystick. There is a second seat behind the command seat for a passenger or instructor. With the keel extended the boat cannot be tipped. The boat has a draft of 3.33 ft (1.01 m) with the keel extended and 1.33 ft (0.41 m) with it retracted, allowing beaching or ground transportation on a trailer.[1][7]

The boat is sailed like a dinghy and does not have provisions for an outboard motor.[1]

Operational history

A fleet of Martin 16s is operated by Nepean Sailing Club in Ottawa, Ontario, Canada and used as the training and racing boat for their Able Sail program for disabled sailors.[8]

See also

Similar sailboats

References

  1. 1 2 3 4 5 Browning, Randy (2017). "Martin 16 sailboat specifications and details". sailboatdata.com. Retrieved 10 January 2018.
  2. ↑ Browning, Randy (2017). "Don Martin". sailboatdata.com. Retrieved 10 January 2018.
  3. ↑ Browning, Randy (2017). "Abbott Boats Inc. 1950-". sailboatdata.com. Retrieved 10 January 2018.
  4. ↑ Browning, Randy (2017). "Martin Yachts Ltd. (CAN)". sailboatdata.com. Retrieved 10 January 2018.
  5. ↑ KAPE Boatworks Inc (2017). "Martin 16 Racing and Cruising". kapeboatworks.com. Retrieved 10 January 2018.
  6. ↑ InterVisionSoft LLC (2017). "Sailboat Specifications for Martin 16". Sailing Joy. Retrieved 10 January 2018.
  7. ↑ KAPE Boatworks. "Martin 16 brochure" (PDF). kapeboatworks.com. Retrieved 10 January 2018.
  8. ↑ Nepean Sailing Club. "NSC Able Sail". nsc.ca. Retrieved 10 January 2018.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.