Caterpillar C175
| Caterpillar C175 [1] | |
|---|---|
| Overview | |
| Manufacturer | Caterpillar Incorporated |
| Layout | |
| Configuration | |
| Displacement | 5,289 cubic centimetres (322.8 in3) per cylinder |
| Cylinder bore | 175 millimetres (6.890 in) |
| Piston stroke | 220 millimetres (8.661 in) |
| Valvetrain | Side camshaft, 4 valves per cylinder |
| Compression ratio | 15.3:1 |
| RPM range | |
| Idle | 500 |
| Redline | 2100 [note 1] |
| Combustion | |
| Turbocharger | Double or Quad |
| Fuel system | Common Rail/EUI™ |
| Management | Electronic (ACERT) with mechanical failsafe |
| Fuel type | Diesel |
| Oil system | Wet sump |
| Cooling system | Water cooled |
| Output | |
| Power output | up to 4,000 kilowatts (5,364 hp) @ 1800 rpm (marine/military rating) |
| Torque output | 9,260 newton metres (6,830 lbf⋅ft) @ 1500 rpm |
| Dimensions | |
| Dry weight | up to 10.45 tonnes (10.285 long tons; 11.519 short tons) |
| Emissions | |
| Emissions target standard | EPA Tier 4 Final or IMO III |
| Emissions control technology | Exhaust gas recirculation |
| Chronology | |
| Predecessor | Caterpillar 3500 series engine |
The Caterpillar C175 is a family of diesel internal combustion engines made by Caterpillar. The engine is 5.3 liters per cylinder in displacement. The cylinder size is 6.89 x 8.66 bore/stroke. The engine can produce 1500-4800 horsepower at 1800 RPM. The peak torque occurs at an engine speed of 1500 RPM. The engine weighs over four tonnes. The Cat C175 is often used in locomotives and passenger-class ships.
See also
- SEMT Pielstick PA4 series engine
- MTU V4000 engine
- Cummins QSK95
- Mitsubishi SR2-PTA series engine
References and notes
- ↑ Derived from governed RPM times overspeed capability given in spec sheet.
This article is issued from
Wikipedia.
The text is licensed under Creative Commons - Attribution - Sharealike.
Additional terms may apply for the media files.