Bioplastic

Bioplastics are plastics derived from renewable biomass sources, such as vegetable fats and oils, corn starch, straw, woodchips, food waste, etc.[1][2][3] Bioplastic can be made from agricultural by-products and also from used plastic bottles and other containers using microorganisms. Common plastics, such as fossil-fuel plastics (also called petrobased polymers) are derived from petroleum or natural gas. Production of such plastics tends to require more fossil fuels and to produce more greenhouse gases than the production of biobased polymers (bioplastics). Not all bioplastics are biodegradable nor biodegrade more readily than commodity fossil-fuel derived plastics.[4] Bioplastics are usually derived from sugar derivatives, including starch, cellulose, lactic acid. As of 2014, bioplastics represented approximately 0.2% of the global polymer market (300 million tons).[5]

IUPAC definition
Biobased polymer derived from the biomass or issued from monomers derived
from the biomass and which, at some stage in its processing into finished
products, can be shaped by flow.
Note 1: Bioplastic is generally used as the opposite of polymer derived from
fossil resources.
Note 2: Bioplastic is misleading because it suggests that any polymer derived
from the biomass is environmentally friendly.
Note 3: The use of the term "bioplastic" is discouraged. Use the expression
"biobased polymer".
Note 4: A biobased polymer similar to a petrobased one does not imply any
superiority with respect to the environment unless the comparison of respective
life cycle assessments is favourable.[6]
Biodegradable plastic utensils
Packaging peanuts made from bioplastics (thermoplastic starch)
Plastics packaging made from bioplastics and other biodegradable plastics

Applications

Flower wrapping made of PLA-blend bio-flex

Bioplastics are used for disposable items, such as packaging, crockery, cutlery, pots, bowls, and straws. [7] Few commercial applications exist for bioplastics. In principle they could replace many applications for petroleum-derived plastics, however cost and performance remain problematic. As a matter of fact, their usage is favourable only if supported by specific regulations limiting the usage of conventional plastics. Typical is the example of Italy, where biodegradable plastic bags and shoppers are compuslory since 2011 with the introduction of a specific law[8]. Beyond structural materials, electroactive bioplastics are being developed that promise to be used to carry electric current.[9]

Biopolymers are available as coatings for paper rather than the more common petrochemical coatings.[10]

Types

Starch-based plastics

Thermoplastic starch currently represents the most widely used bioplastic, constituting about 50 percent of the bioplastics market. Simple starch bioplastic can be made at home.[11] Pure starch is able to absorb humidity, and is thus a suitable material for the production of drug capsules by the pharmaceutical sector. Flexibiliser and plasticiser such as sorbitol and glycerine can also be added so the starch can also be processed thermo-plastically. The characteristics of the resulting bioplastic (also called "thermo-plastical starch") can be tailored to specific needs by adjusting the amounts of these additives.

Starch-based bioplastics are often blended with biodegradable polyesters to produce starch/polylactic acid,[12] starch/polycaprolactone[13] or starch/Ecoflex[14] (polybutylene adipate-co-terephthalate produced by BASF[15]). blends. These blends are used for industrial applications and are also compostable. Other producers, such as Roquette, have developed other starch/polyolefin blends. These blends are not biodegradable, but have a lower carbon footprint than petroleum-based plastics used for the same applications.[16]

Due to the origin of its raw material, starch is cheap, abundant, and renewable[17].

Starch based plastics are complex blends of starch with compostable plastics such as Polylactic acid, Polybutylene Adipate Terephthalate, Polybutylene Succinate, Polycaprolactone, and Polyhydroxyalkanoates. These complex blends improve water resistance as well as processing and mechanical properties. [17]

 

Starch-based films (mostly used for packaging purposes) are made mainly from starch blended with thermoplastic polyesters to form biodegradable and compostable products. These films are seen specifically in consumer goods packaging of magazine wrappings and bubble films. In food packaging, these films are seen as bakery or fruit and vegetable bags. Composting bags with this films are used in selective collecting of organic waste. [17]

Further, a new starch-based film was developed by Agricultural Research Service scientists can even be used as a paper [18].

Cellulose-based plastics

A packaging blister made from cellulose acetate, a bioplastic

Cellulose bioplastics are mainly the cellulose esters, (including cellulose acetate and nitrocellulose) and their derivatives, including celluloid.

Cellulose can become thermoplastic when extensively modified. An example of this is cellulose acetate, which is expensive and therefore rarely used for packaging. However, cellulosic fibers added to starches can improve mechanical properties, permeability to gas, and water resistance due to being less hydrophilic than starch [19].

A group at Shanghai University was able to construct a novel green plastic based on cellulose through a method called hot pressing [20].

Protein-based plastics

Bioplastics can be made from proteins from different sources. For example, wheat gluten and casein show promising properties as a raw material for different biodegradable polymers.[21]

Additionally, soy protein is being considered as another source of bioplastic. Soy proteins have been used in non-bioplastic plastic production for over one hundred years. For example, body panels of an original Ford automobile were made of soy-based plastic [22].

There are difficulties with using soy protein-based plastics due to their water sensitivity and relatively high cost. Therefore, producing blends of soy protein with some already-available biodegradable polyesters improves the water sensitivity and cost [23].

Some aliphatic polyesters

The aliphatic biopolyesters are mainly polyhydroxyalkanoates (PHAs) like the poly-3-hydroxybutyrate (PHB), polyhydroxyvalerate (PHV) and polyhydroxyhexanoate (PHH).

Polylactic acid (PLA)

Mulch film made of polylactic acid (PLA)-blend bio-flex

Polylactic acid (PLA) is a transparent plastic produced from corn[24] or dextrose. Superficially, it is similar to conventional petrochemical-based mass plastics like PS. It has the distinct advantage of degrading to nontoxic products. Unfortunately it exhibits inferior impact strength, thermal robustness, and barrier properties (blocking air transport across the membrane).[5] PLA and PLA blends generally come in the form of granulates with various properties, and are used in the plastic processing industry for the production of films, fibers, plastic containers, cups and bottles. PLA is also the most common type of plastic filament used for home fused deposition modeling.

Poly-3-hydroxybutyrate

The biopolymer poly-3-hydroxybutyrate (PHB) is a polyester produced by certain bacteria processing glucose, corn starch[25] or wastewater.[26] Its characteristics are similar to those of the petroplastic polypropylene. PHB production is increasing. The South American sugar industry, for example, has decided to expand PHB production to an industrial scale. PHB is distinguished primarily by its physical characteristics. It can be processed into a transparent film with a melting point higher than 130 degrees Celsius, and is biodegradable without residue.

Polyhydroxyalkanoates

Polyhydroxyalkanoates are linear polyesters produced in nature by bacterial fermentation of sugar or lipids. They are produced by the bacteria to store carbon and energy. In industrial production, the polyester is extracted and purified from the bacteria by optimizing the conditions for the fermentation of sugar. More than 150 different monomers can be combined within this family to give materials with extremely different properties. PHA is more ductile and less elastic than other plastics, and it is also biodegradable. These plastics are being widely used in the medical industry.

Polyamide 11

PA 11 is a biopolymer derived from natural oil. It is also known under the tradename Rilsan B, commercialized by Arkema. PA 11 belongs to the technical polymers family and is not biodegradable. Its properties are similar to those of PA 12, although emissions of greenhouse gases and consumption of nonrenewable resources are reduced during its production. Its thermal resistance is also superior to that of PA 12. It is used in high-performance applications like automotive fuel lines, pneumatic airbrake tubing, electrical cable antitermite sheathing, flexible oil and gas pipes, control fluid umbilicals, sports shoes, electronic device components, and catheters.

A similar plastic is Polyamide 410 (PA 410), derived 70% from castor oil, under the trade name EcoPaXX, commercialized by DSM.[27] PA 410 is a high-performance polyamide that combines the benefits of a high melting point (approx. 250 °C), low moisture absorption and excellent resistance to various chemical substances.

Bio-derived polyethylene

The basic building block (monomer) of polyethylene is ethylene. Ethylene is chemically similar to, and can be derived from ethanol, which can be produced by fermentation of agricultural feedstocks such as sugar cane or corn. Bio-derived polyethylene is chemically and physically identical to traditional polyethylene – it does not biodegrade but can be recycled. The Brazilian chemicals group Braskem claims that using its method of producing polyethylene from sugar cane ethanol captures (removes from the environment) 2.15 tonnes of CO2 per tonne of Green Polyethylene produced.

Genetically modified bioplastics

Genetic modification (GM) is also a challenge for the bioplastics industry. None of the currently available bioplastics – which can be considered first generation products – require the use of GM crops, although GM corn is the standard feedstock.

Looking further ahead, some of the second generation bioplastics manufacturing technologies under development employ the "plant factory" model, using genetically modified crops or genetically modified bacteria to optimise efficiency.

Polyhydroxyurethanes

Recently, there have been a large emphasis on producing biobased and isocyanate-free polyurethanes. One such example utilizes a spontaneous reaction between polyamines and cyclic carbonates to produce polyhydroxurethanes.[28] Unlike traditional cross-linked polyurethanes, cross-linked polyhydroxyurethanes have been shown to be capable of recycling and reprocessing through dynamic transcarbamoylation reactions.[29]

Lipid derived polymers

A number bioplastic classes have been synthesized from plant and animal derived fats and oils.[30] Polyurethanes,[31][32] polyesters,[33] epoxy resins[34] and a number of other types of polymers have been developed with comparable properties to crude oil based materials. The recent development of olefin metathesis has opened a wide variety of feedstocks to economical conversion into biomonomers and polymers.[35] With the growing production of traditional vegetable oils as well as low cost microalgae derived oils,[36] there is huge potential for growth in this area.

Environmental impact

Confectionery packaging made of PLA-blend bio-flex
Bottles made from cellulose acetate biograde
Drinking straws made of PLA-blend bio-flex
Jar made of PLA-blend bio-flex, a bioplastic


Materials such as starch, cellulose, wood, sugar and biomass are used as a substitute for fossil fuel resources to produce bioplastics; this makes the production of bioplastics a more sustainable activity compared to conventional plastic production [37]. The environmental impact of bioplastics is often debated, as there are many different metrics for "greenness" (e.g., water use, energy use, deforestation, biodegradation, etc.) [38]. Hence bioplastic environmental impacts are categorized into nonrenewable energy use, climate change, eutrophication and acidification [39]. Bioplastic production significantly reduces greenhouse gas emissions and decreases non-renewable energy consumption [37]. Firms worldwide would also be able to increase the environmental sustainability of their products by using bioplastics [40]Although bioplastics save more nonrenewable energy than conventional plastics and emit less GHG compared to conventional plastics, bioplastics also have negative environmental impacts such as eutrophication and acidification [39]. Bioplastics induce higher eutrophication potentials than conventional plastics[39]. Biomass production during industrial farming practices causes nitrate and phosphate to filtrate into water bodies; this causes eutrophication which is the richness of the nutrients in body waters [39]. Eutrophication is a threat to water resources around the world since it kills aquatic organisms, creates dead zones and causes harmful algal blooms [41]. Bioplastics also increase acidification [39]. The high increase in eutrophication and acidification caused by bioplastics is also caused by the using chemical fertilizer in the cultivation of renewable raw materials to produce bioplastics [37].

Other environmental impacts of bioplastics include exerting lower human and terrestrial ecotoxicity and carcinogenic potentials compared to conventional plastics [39]. However, bioplastics exert higher aquatic ecotoxicity than conventional materials [39]. Bioplastics and other bio-based materials increase stratospheric ozone depletion compared to conventional plastics; this is a result of nitrous oxide emissions during fertilizer application during industrial farming for biomass production [39]. Artificial fertilizer increase nitrous oxide emissions especially when the crop does not need all the nitrogen [42]. Minor environmental impacts of bioplastics include toxicity through using pesticides on the crops used to make bioplastics [37]. Bioplastics also cause carbon dioxide emissions from harvesting vehicles [37]. Other minor environmental impacts include high water consumption for biomass cultivation, soil erosion, soil carbon losses and loss of biodiversity, and they are mainly are a result of land use associated with bioplastics [39]. Land use for bioplastics production leads to lost carbon sequestration and increases the carbon costs while diverting land from its existing uses [43]

Although bioplastics are extremely advantageous because they reduce non-renewable consumption and GHG emissions, they also negatively affect the environment through land and water consumption, using pesticide and fertilizer, eutrophication and acidification; hence one’s preference for either bioplastics or conventional plastics depends on what one considers the most important environmental impact [37].


Biodegradation of Bioplastics

Packaging air pillow made of PLA-blend bio-flex

Biodegradation of any plastic is a process that happens at solid/liquid interface whereby the enzymes in the liquid phase depolymerize the solid phase [44]Both bioplastics and conventional plastics containing additives are able to biodegrade [45]. Bioplastics are able to biodegrade in different environments hence they are more acceptable than conventional plastics [46]. Biodegradability of bioplastics occurs under various environmental conditions including soil, aquatic environments and compost [46]. Both the structure and composition of biopolymer or bio-composite have an effect on the biodegradation process, hence changing the composition and structure might increase biodegradability [46]. Soil and compost as environment conditions are more efficient in biodegradation due to their high microbial diversity [46]. Composting not only biodegrades bioplastics efficiently but it also significantly reduces the emission of greenhouse gases [46]. Biodegradability of bioplastics in compost environments can be upgraded by adding more soluble sugar and increasing temperature [46]. Soil environments on the other hand have high diversity of microorganisms making it easier for biodegradation of bioplastics to occur [46]. However, bioplastics in soil environments need higher temperatures and a longer time to biodegrade [46]. Some bioplastics biodegrade more efficiently in water bodies and marine systems; however, this causes danger to marine ecosystems and freshwater [46]. Hence it is accurate to conclude that biodegradation of bioplastics in water bodies which leads to the death of aquatic organisms and unhealthy water can be noted as one of the negative environmental impacts of bioplastics.

Industry & Markets

Tea bags made of polylactide (PLA), (peppermint tea)

While plastics based on organic materials were manufactured by chemical companies throughout the 20th century, the first company solely focused on bioplastics- Marlborough Biopolymers- was founded in 1983. However, Marlborough and other ventures that followed failed to find commercial success, with the first such company to secure long-term financial success being the Italian company Novamont, founded in 1989. [47]

The expense and time requirements of researching and testing new bio-based and biodegradable polymers have placed bioplastics at a commerical disadvantage compared to petrochemical-based plastics. Bioplastics remain less than one percent of all plastics manufactured worldwide [48], and until very recently have been an average of 2-4 times more expensive to manufacture than petrochemical plastics.[49] Most bioplastics do not yet save more carbon emissions than are required to manufacture them.[50] In addition to the cost of research, bioplastics lack the versatility of application that petrochemical plastics possess, with many conventional plastics having no bio-based equivalent that can match their quality. [51] Finally, the industry faces logistical problems around both material sources and waste disposal infrastructure. As most bioplastics are produced from plant sugars, starches, or oils, it is estimated that replacing 250 million tons of the plastic manufactured each year with bio-based plastics would require 100 million hectares of land, or 7% of the arable land on Earth. And when bioplastics reach the end of their life cycle, those designed to be compostable and marketed as biodegradable are often sent to landfills due to the lack of proper composting facilities or waste sorting, where they then release methane as they break down anaerobically. [52]

A chart depicting the increase in bioplastics manufactured each year in ten year intervals, measured in millions of tonnes

Despite this, the bioplastics industry has grown by 20-30% a year. BCC Research forecast that the global market for biodegradable polymers would grow at a compound average growth rate of more than 17 percent through 2012, and this rate of growth has actually been exceeded. Bio-based plastics are predicted to make up 5% of all manufactured plastics in 2020, and 40% of all manufactured plastics in 2030.[53] Ceresana predicts that when bioplastics reach 5% of the plastics market in 2020, the market for bio-based plastics will be worth 5.8 billion dollars, three times the size of the bioplastics market in 2014.[54] The largest demand for bioplastics has been in packaging, driven by widespread concern over the use of petrochemical plastics in disposable, one-use products that are then sequestered in landfills or the natural environment. Packaging continues to provide 60% of the market for bioplastic, and to account for the largest share of growth in the industry.[55] There has been a shift in the market for an increased demand of bioplastics, especially for sustainable packaging [56]. This has been seen specifically in Western Europe, which accounted for more than 45% of the global biodegradable plastics demand in 2014. This demand from consumers for more sustainable options was also seen in recent policies; Italy has banned the use of petroleum-based plastic bags, and there is a tax on use of petroleum based plastic bags in Germany [57]

However, the industry in biobased polymers has not grown as rapidly as some have predicted. The NNFCC predicted that the industry would exceed 2.1 million tonnes produced each year by 2013[58], but by in 2017, only 2.05 million tonnes of bioplastic were produced in that year. This remains only a small fraction of all plastics manufacturing, which produced a total 292 million tonnes of thermoplastics in 2015.[59] As production expands, there remain no universal standards governing bioplastics and their manufacture or disposal. This includes a lack of any regulation on the amount of sustainably sourced material in a product required for it to be marketed as a bioplastic.[60] It should also be noted that, according to Market and Market, the global biodegradable plastics market is just beginning and only accounts for less than 1% of the overall plastics market [61]

Prism pencil sharpener made from cellulose acetate biograde

Because of the fragmentation in the market and ambiguous definitions it is difficult to describe the total market size for bioplastics, but estimates put global production capacity at 327,000 tonnes.[58] In contrast, global production of polyethylene (PE) and polypropylene (PP), the world’s leading petrochemical derived polyolefins, was estimated at over 150 million tonnes in 2015.[62]

COPA (Committee of Agricultural Organisation in the European Union) and COGEGA (General Committee for the Agricultural Cooperation in the European Union) have made an assessment of the potential of bioplastics in different sectors of the European economy:

Catering products: 450,000 tonnes per year
Organic waste bags: 100,000 tonnes per year
Biodegradable mulch foils: 130,000 tonnes per year
Biodegradable foils for diapers 80,000 tonnes per year
Diapers, 100% biodegradable: 240,000 tonnes per year
Foil packaging: 400,000 tonnes per year
Vegetable packaging: 400,000 tonnes per year
Tyre components: 200,000 tonnes per year
Total: 2,000,000 tonnes per year

History and Development of Bioplastics

  • 1862: At the Great London Exhibition, Alexander Parkensine displays Parkenisine, the first plastic. Parkensine is made from nitrocellulose. (White 1998)[63]
  • 1868: John Wesley Hyatt creates a bioplastic derived from cellulose, Celluloid. Celluloid becomes the major raw material for the film industry. (Pathak, Sneha, Mathew 2014) [64]
  • 1897: Still produced today, Galalith is a milk-based bioplastic that was created by German chemists in 1897. Galalith is primarily found in buttons. (Thielen 2014) [65]
  • 1907: Leo Baekeland invented Bakelite, which received the National Historic Chemical Landmark for its non-conductivity and heat-resistant properties. It is used in radio and telephone casings, kitchenware, firearms and many more products. (Pathak, Sneha, Mathew 2014)
  • 1912: Brandenberger invents Cellophane out of wood, cotton, or hemp cellulose. (Thielen 2014) [65]
  • 1920s: Wallace Carothers finds Polylatctic Acid (PLA) plastic. PLA is incredibly expensive to produce and is not mass produced until 1989. (Whiteclouds 2018)  
  • 1926: Maurice Lemoigne invents polyhydroxybutyrate (PHB) which is the first bioplastic made from bacteria. (Thielen 2014) [65]
  • 1930s: The first bioplastic car was made from soy beans by Henry Ford. (Thielen 2014) [65]
  • 1940-1945: During World War II, an increase in plastic production is seen as it is used in many wartime materials. Due to government funding and oversight the United States production of plastics (in general, not just bioplastics) tripled during 1940-1945(Rogers 2005). [66] 
  • 1950s: Amylomaize (>50% amylose content corn) was successfully bred and commercial bioplastics applications started to be explored. (Liu, Moult, Long, 2009)[67] A decline in bioplastic development is seen due to the cheap oil prices, however the development of synthetic plastics continues.
  • 1970s: The environmental movement spurred more development in bioplastics. (Rogers 2005) [68]
  • 1983: The first bioplastics company, Marlborough Biopolymers, is started which uses a bacteria-based bioplastic called biopal. (Feder 1985) [69]
  • 1989: The further development of PLA is made by Dr. Patrick R. Gruber when he figures out how to create PLA from corn. (Whiteclouds 2018). The leading bioplastic company is created called Novamount. Novamount uses matter-bi, a bioplastic, in multiple different applications. (Novamount 2018) [70]
  • 1992: It is reported in Science that PHB can be produced by the plant Arabidopsis thaliana. (Poirier, Dennis, Klomparens, Nawrath, Somerville 1992) [71]
  • Late 1990s: The development of TP starch and BIOPLAST from research and production of the company BIOTEC lead to the BIOFLEX film. BIOFLEX film can be classified as blown film extrusion, flat film extrusion, and injection moulding lines. These three classifications have applications as follows: Blown films - sacks, bags, trash bags, mulch foils, hygiene products, diaper films, air bubble films, protective clothing, gloves, double rib bags, labels, barrier ribbons; Flat films - trays, flower pots, freezer products and packaging, cups, pharmaceutical packaging; Injection moulding - disposable cutlery, cans, containers, performed pieces, CD trays, cemetery articles, golf tees, toys, writing materials. (Lorcks 1998) [72]
  • 2001: Metabolix inc. purchases Monsanto’s biopol business (originally Zeneca) which uses plants to produce bioplastics. (Barber and Fisher 2001) [73]
  • 2001: Nick Tucker uses elephant grass as a bioplastic base to make plastic car parts. (Tucker 2001) [74]
  • 2005: Cargill and Dow Chemicals is rebranded as NatureWorks and becomes the leading PLA producer. (Penisi 2016)  [75]
  • 2007: Metabolix inc. market tests its first 100% biodegradable plastic called Mirel, made from corn sugar fermenation and genetically engineered bacteria. (Digregorio 2009)  [76]
  • 2012: A bioplastic is developed from seaweed proving to be one of the most environmentally friendly bioplastics based on research published in the journal of pharmacy research. (Rajendran, Puppala, Sneha, Angeeleena, Rajam 2012)  [77]
  • 2013: a patent is put on bioplastic derived from blood and a crosslinking agent like sugars, proteins, etc. (iridoid derivatives, diimidates, diones, carbodiimides, acrylamides, dimethylsuberimidates, aldehydes, Factor XIII, dihomo bifunctional NHS esters, carbonyldiimide, glyoxyls, proanthocyanidin, reuterin). This invention can be applied by using the bioplastic as tissue, cartilage, tendons, ligaments, bones, and being used in stem cell delivery. (Campbell, Burgress, Weiss, Smith 2013)  [78]
  • 2014: It is found in a study published in 2014 that bioplastics can be made from blending vegetable waste (parsley and spinach stems, the husks from cocoa, the hulls of rice, etc.) with TFA solutions of pure cellulose creates a bioplastic. (Bayer, Guzman-Puyol, Heredia-Guerrero, Ceseracciu, Pignatelli, Ruffilli, Cingolani, and Athanassiou 2014) [79]
  • 2016: An experiment finds that a car bumper that passes regulation can be made from nano-cellulose based bioplastic biomaterials using banana peels. (Hossain, Ibrahim, Aleissa 2016) [80]
  • 2017: A new proposal for bioplastics made from Lignocellulosics resources (dry plant matter). (Brodin, Malin, Vallejos, Opedal, Area, Chinga-Carrasco 2017) [81]
  • 2018: Many developments occur including Ikea starting industrial production of bioplastics furniture (Barret 2018), Project Effective focusing on replacing nylon with bio-nylon (Barret 2018), and the first packaging made from fruit (Barret 2018).[82]

*not a comprehensive list; inventions pulled by the author to show versatility of bioplastics and important breakthroughs; new applications and inventions of bioplastics happen each year

Year Bioplastic Discovery or Development
1862 Parkesine - Alexander Parkes
1868 Celluloid - John Wesley Hyatt
1897 Galalith - German chemists
1907 Bakelite - Leo Baekeland
1912 Cellophane - Jacques E. Brandenberger
1920s Polylactic ACid (PLA) - Wallace Carothers
1926 Polyhydroxybutyrate (PHB) - Maurice Lemoigne
1930s Soy bean-based bioplastic car - Henry Ford
1983 Biopal - Marlborough Biopolymers
1989 PLA from corn - Dr. Patrick R. Gruber; Matter-bi - Novamount
1992 PHB can be produced by Arabidopsis thaliana (a small flowering plant)
1998 Bioflex film (blown, flat, injection molding) leads to many different applications of bioplastic
2001 PHB can be produced by elephant grass
2007 Mirel (100% biodegradable plastic) by Metabolic inc. is market tested
2012 Bioplastic is developed from seaweed
2013 Bioplastic made from blood and a cross-linking agent which is used in medical procedures
2014 Bioplastic made from vegetable waste
2016 Car bumper made from banana peel bioplastic
2017 Bioplastics made from lignocellulosic resources (dry plant matter)
2018 Bioplastic furniture, bio-nylon, packaging from fruit
Bioplastics Development Center - University of Massachusetts Lowell
A pen made with bioplastics (Polylactide, PLA)

Testing procedures

A bioplastic shampoo bottle made of PLA-blend bio-flex

Industrial compostability – EN 13432, ASTM D6400

The EN 13432 industrial standard is arguably the most international in scope. This standard must be met in order to claim that a plastic product is compostable in the European marketplace. In summary, it requires biodegradation of 90% of the materials in a lab within 90 days. The ASTM 6400 standard is the regulatory framework for the United States and sets a less stringent threshold of 60% biodegradation within 180 days for non-homopolymers, and 90% biodegradation of homopolymers within industrial composting conditions (temperatures at or above 140F). Municipal compost facilities do not see above 130F.

Many starch-based plastics, PLA-based plastics and certain aliphatic-aromatic co-polyester compounds, such as succinates and adipates, have obtained these certificates. Additive-based bioplastics sold as photodegradable or Oxo Biodegradable do not comply with these standards in their current form.

Compostability – ASTM D6002

The ASTM D 6002 method for determining the compostability of a plastic defined the word compostable as follows:

that which is capable of undergoing biological decomposition in a compost site such that the material is not visually distinguishable and breaks down into carbon dioxide, water, inorganic compounds and biomass at a rate consistent with known compostable materials.[83]

This definition drew much criticism because, contrary to the way the word is traditionally defined, it completely divorces the process of "composting" from the necessity of it leading to humus/compost as the end product. The only criterion this standard does describe is that a compostable plastic must look to be going away as fast as something else one has already established to be compostable under the traditional definition.

Withdrawal of ASTM D 6002

In January 2011, the ASTM withdrew standard ASTM D 6002, which had provided plastic manufacturers with the legal credibility to label a plastic as compostable. Its description is as follows:

This guide covered suggested criteria, procedures, and a general approach to establish the compostability of environmentally degradable plastics.[84]

The ASTM has yet to replace this standard.

Biobased – ASTM D6866

The ASTM D6866 method has been developed to certify the biologically derived content of bioplastics. Cosmic rays colliding with the atmosphere mean that some of the carbon is the radioactive isotope carbon-14. CO2 from the atmosphere is used by plants in photosynthesis, so new plant material will contain both carbon-14 and carbon-12. Under the right conditions, and over geological timescales, the remains of living organisms can be transformed into fossil fuels. After ~100,000 years all the carbon-14 present in the original organic material will have undergone radioactive decay leaving only carbon-12. A product made from biomass will have a relatively high level of carbon-14, while a product made from petrochemicals will have no carbon-14. The percentage of renewable carbon in a material (solid or liquid) can be measured with an accelerator mass spectrometer.[85][86]

There is an important difference between biodegradability and biobased content. A bioplastic such as high-density polyethylene (HDPE)[87] can be 100% biobased (i.e. contain 100% renewable carbon), yet be non-biodegradable. These bioplastics such as HDPE nonetheless play an important role in greenhouse gas abatement, particularly when they are combusted for energy production. The biobased component of these bioplastics is considered carbon-neutral since their origin is from biomass.

Anaerobic biodegradability – ASTM D5511-02 and ASTM D5526

The ASTM D5511-12 and ASTM D5526-12 are testing methods that comply with international standards such as the ISO DIS 15985 for the biodegradability of plastic.

See also

“Bioplastics Know No Boundaries.” Biocycle, vol. 44, no. 10, 2003, p. 21, http://search.ebscohost.com/login.aspx?direct=true&db=aph&AN=11168140&site=ehost-live.

Reporter, Science. Bioplastic Sustainable Green Plastic. pp. 26–27, http://nopr.niscair.res.in/bitstream/123456789/33495/1/SR 52%2812%29 26-27.pdf.

Washam, Cynthia. “Plastics Go Green.” ChemMatters, no. April, 2010, p. 3, https://www.acs.org/content/dam/acsorg/education/resources/highschool/chemmatters/articlesbytopic/sustainability/chemmatters-april2010-bioplastics.pdf?_ga=2.140030771.107112730.1527342520-1290044966.1527342520.

https://www.purdue.edu/newsroom/releases/2016/Q2/innovative-process-produces-biodegradable-cellulose-based-films.html

https://www.alliedmarketresearch.com/press-release/bioplastics-market.html

https://www.nytimes.com/2018/01/08/world/europe/italy-plastic-bags.html

(PDF) Bioplastics: Its Timeline Based Scenario & Challenges. Available from: https://www.researchgate.net/publication/275412348_Bioplastics_Its_Timeline_Based_Scenario_Challenges [accessed Sep 12 2018].

Bioplastics with a green agenda

https://ac.els-cdn.com/S1369527410000275/1-s2.0-S1369527410000275-main.pdf?_tid=c390cd85-6319-45f9-acdd-09553c2fa14f&acdnat=1536776374_7af623fd390a6bc433c2790c319f58da

Sustainable consumption and production of plastics

https://ac.els-cdn.com/S0040162597001297/1-s2.0-S0040162597001297-main.pdf?_tid=e56e2f5f-3937-489d-ab04-b158725115ac&acdnat=1536776614_169941eef39624d1c1add184a79ffde6

Green Plastics: An Introduction to the New Science

of Biodegradable Plastics

https://onlinelibrary.wiley.com/doi/epdf/10.1162/108819803323059569

Making Materials: The case of elaborating qualities of bioplastics

https://www.mitpressjournals.org/doi/pdf/10.1162/DESI_a_00417

Plastics Without Petroleum History and Politics of 'Green' Plastics in the United States

https://search.proquest.com/docview/1347639560?pq-origsite=gscholar

Plastics and the environment

https://books.google.com/books?hl=en&lr=&id=KZCNJ8qSWKYC&oi=fnd&pg=PR13&dq=history+of+plastics&ots=PLfY8G2ooQ&sig=ZjMQM3brGmRbL8GblR6Rl3TfkiU#v=onepage&q=history%20of%20plastics&f=false

The Social construciton of Bakelite: Toward a theory of invention

https://books.google.com/books?hl=en&lr=&id=SUCtOwns7TEC&oi=fnd&pg=PA159&dq=history+of+plastics&ots=RwxG_O6i1x&sig=HRw4xAEGsisYA0I9ftGyPFIrzsE#v=onepage&q=history%20of%20plastics&f=false

References

  1. ↑ Hong Chua; Peter H. F. Yu & Chee K. Ma (March 1999). "Accumulation of biopolymers in activated sludge biomass". Applied Biochemistry and Biotechnology. Humana Press Inc. 78: 389–399. doi:10.1385/ABAB:78:1-3:389. ISSN 0273-2289. Retrieved 2009-11-24.
  2. ↑ Carrington, Damian (5 July 2018). "Researchers race to make bioplastics from straw and food waste". theguardian.com.
  3. ↑ News, A. B. C. (29 December 2008). "Biodegradable plastic made from plants, not oil, is emerging". abcnews.go.com.
  4. ↑ "Bioplastics (PLA) - World Centric". worldcentric.org.
  5. 1 2 Andreas Künkel, Johannes Becker, Lars Börger, Jens Hamprecht, Sebastian Koltzenburg, Robert Loos, Michael Bernhard Schick, Katharina Schlegel, Carsten Sinkel, Gabriel Skupin and Motonori Yamamoto (2016). "Polymers, Biodegradable". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.n21_n01.pub2.
  6. ↑ Vert, Michel (2012). "Terminology for biorelated polymers and applications (IUPAC Recommendations 2012)" (PDF). Pure and Applied Chemistry. 84 (2): 377–410. doi:10.1351/PAC-REC-10-12-04.
  7. ↑ Chen, G.; Patel, M. (2012). "Plastics derived from biological sources: Present and future: P technical and environmental review". Chemical Reviews. 112 (4): 2082–2099. doi:10.1021/cr200162d.
  8. ↑ "Consiglio dei Ministri conferma la messa al bando dei sacchetti di plastica non biodegradabili - Ministero dell'Ambiente e della Tutela del Territorio e del Mare". minambiente.it.
  9. ↑ Suszkiw, Jan (December 2005). "Electroactive Bioplastics Flex Their Industrial Muscle". News & Events. USDA Agricultural Research Service. Retrieved 2011-11-28.
  10. ↑ Khwaldia, Khaoula; Elmira Arab-Tehrany; Stephane Desobry (2010). "Biopolymer Coatings on Paper Packaging Materials". Comprehensive Reviews in Food Science and Food Safety. 9 (1): 82–91. doi:10.1111/j.1541-4337.2009.00095.x. Retrieved 9 Mar 2015.
  11. ↑ Make Potato Plastic!. Instructables.com (2007-07-26). Retrieved on 2011-08-14.
  12. ↑ Khalid, Saud; Yu, Long; Meng, Linghan; Liu, Hongsheng; Ali, Amjad; Chen, Ling (2017). "Poly(lactic acid)/starch composites: Effect of microstructure and morphology of starch granules on performance". Journal of Applied Polymer Science. 134: n/a–n/a. doi:10.1002/app.45504. Retrieved 25 July 2017.
  13. ↑ "Starch based Bioplastic Manufacturers and Suppliers". bioplasticsonline.net. Archived from the original on August 14, 2011.
  14. ↑ "Enhancing biopolymers: additives are needed for toughness, heat resistance & processability.(biopolymers)(Cover story)". goliath.ecnext.com. Archived from the original on 2012-07-13.
  15. ↑ "BASF announces major bioplastics production expansion".
  16. ↑ "Roquette, nouvel acteur sur le marché des plastiques, lance GAÏALENE® : une gamme innovante de plastique végétal".
  17. 1 2 3 Avérous, Luc; Pollet, Eric (2014), "Nanobiocomposites Based on Plasticized Starch", Starch Polymers, Elsevier, pp. 211–239, ISBN 9780444537300, retrieved 2018-09-26
  18. ↑ Cate, Peter (January 2017). "Collaboration delivers better results". Reinforced Plastics. 61 (1): 51–54. doi:10.1016/j.repl.2016.09.002. ISSN 0034-3617.
  19. ↑ Avérous, Luc; Pollet, Eric (2014), "Nanobiocomposites Based on Plasticized Starch", Starch Polymers, Elsevier, pp. 211–239, ISBN 9780444537300, retrieved 2018-09-26
  20. ↑ Song, Na; Hou, Xingshuang; Chen, Li; Cui, Siqi; Shi, Liyi; Ding, Peng (2017-05-16). "A Green Plastic Constructed from Cellulose and Functionalized Graphene with High Thermal Conductivity". ACS Applied Materials & Interfaces. 9 (21): 17914–17922. doi:10.1021/acsami.7b02675. ISSN 1944-8244.
  21. ↑ Song, J. H.; Murphy, R. J.; Narayan, R.; Davies, G. B. H. (2009-07-27). "Biodegradable and compostable alternatives to conventional plastics". Philosophical Transactions of the Royal Society B: Biological Sciences. 364 (1526): 2127–2139. doi:10.1098/rstb.2008.0289. ISSN 0962-8436. PMC 2873018. PMID 19528060.
  22. ↑ Ralston, Brian E.; Osswald, Tim A. (February 2008). "The History of Tomorrow's Materials: Protein-Based Biopolymers". Plastics Engineering. 64 (2): 36–40. doi:10.1002/j.1941-9635.2008.tb00292.x. ISSN 0091-9578.
  23. ↑ Zhang, Jinwen; Jiang, Long; Zhu, Linyong; Jane, Jay-lin; Mungara, Perminus (May 2006). "Morphology and Properties of Soy Protein and Polylactide Blends". Biomacromolecules. 7 (5): 1551–1561. doi:10.1021/bm050888p. ISSN 1525-7797.
  24. ↑ "History, Travel, Arts, Science, People, Places - Smithsonian". smithsonianmag.com.
  25. ↑ "Mirel: PHAs grades for Rigid Sheet and Thermoforming".
  26. ↑ "Micromidas is using carefully constructed populations of bacteria to convert organic waste into bio-degradable plastics". Archived from the original on October 23, 2011.
  27. ↑ "Home". dsm.com.
  28. ↑ Nohra, Bassam; Laure Candy; Jean-Francois Blanco; Celine Guerin; Yann Raoul; Zephirin Mouloungui (2013). "From Petrochemical Polyurethanes to Biobased Polyhydroxyurethanes". Macromolecules. 46: 3771–3792. doi:10.1021/ma400197c.
  29. ↑ Fortman, David J.; Jacob P. Brutman; Christopher J. Cramer; Marc A. Hillmyer; William R. Dichtel (2015). "Mechanically Activated, Catalyst-Free Polyhydroxyurethane Vitrimers". Journal of the American Chemical Society. 137: 14019–14022. doi:10.1021/jacs.5b08084. PMID 26495769.
  30. ↑ Meier, Michael A. R.; Metzger, Jürgen O.; Schubert, Ulrich S. (2007-10-02). "Plant oil renewable resources as green alternatives in polymer science". Chemical Society Reviews. 36 (11): 1788. doi:10.1039/b703294c. ISSN 1460-4744.
  31. ↑ Floros, Michael; Hojabri, Leila; Abraham, Eldho; Jose, Jesmy; Thomas, Sabu; Pothan, Laly; Leao, Alcides Lopes; Narine, Suresh (2012). "Enhancement of thermal stability, strength and extensibility of lipid-based polyurethanes with cellulose-based nanofibers". Polymer Degradation and Stability. 97 (10): 1970–1978. doi:10.1016/j.polymdegradstab.2012.02.016.
  32. ↑ Pillai, Prasanth K. S.; Floros, Michael C.; Narine, Suresh S. (2017-07-03). "Elastomers from Renewable Metathesized Palm Oil Polyols". ACS Sustainable Chemistry & Engineering. 5 (7): 5793–5799. doi:10.1021/acssuschemeng.7b00517.
  33. ↑ Can, E.; Küsefoğlu, S.; Wool, R. P. (2001-07-05). "Rigid, thermosetting liquid molding resins from renewable resources. I. Synthesis and polymerization of soy oil monoglyceride maleates". Journal of Applied Polymer Science. 81 (1): 69–77. doi:10.1002/app.1414. ISSN 1097-4628.
  34. ↑ Stemmelen, M.; Pessel, F.; Lapinte, V.; Caillol, S.; Habas, J.-P.; Robin, J.-J. (2011-06-01). "A fully biobased epoxy resin from vegetable oils: From the synthesis of the precursors by thiol-ene reaction to the study of the final material". Journal of Polymer Science Part A: Polymer Chemistry. 49 (11): 2434–2444. doi:10.1002/pola.24674. ISSN 1099-0518.
  35. ↑ Meier, Michael A. R. (2009-07-21). "Metathesis with Oleochemicals: New Approaches for the Utilization of Plant Oils as Renewable Resources in Polymer Science". Macromolecular Chemistry and Physics. 210 (13–14): 1073–1079. doi:10.1002/macp.200900168. ISSN 1521-3935.
  36. ↑ Mata, Teresa M.; Martins, António A.; Caetano, Nidia. S. (2010). "Microalgae for biodiesel production and other applications: A review". Renewable and Sustainable Energy Reviews. 14 (1): 217–232. doi:10.1016/j.rser.2009.07.020.
  37. 1 2 3 4 5 6 Gironi, F., and Vincenzo Piemonte. “Bioplastics and Petroleum-Based Plastics: Strengths and Weaknesses.” Energy Sources, Part A: Recovery, Utilization and Environmental Effects, vol. 33, no. 21, 2011, pp. 1949–59, doi:10.1080/15567030903436830.
  38. ↑ Yates, Madeleine R., and Claire Y. Barlow. “Life Cycle Assessments of Biodegradable, Commercial Biopolymers - A Critical Review.” Resources, Conservation and Recycling, vol. 78, Elsevier B.V., 2013, pp. 54–66, doi:10.1016/j.resconrec.2013.06.010.
  39. 1 2 3 4 5 6 7 8 9 Weiss, Martin, et al. “A Review of the Environmental Impacts of Biobased Materials.” Journal of Industrial Ecology, vol. 16, no. SUPPL.1, 2012, doi:10.1111/j.1530-9290.2012.00468.x.
  40. ↑ Brockhaus, Sebastian, et al. “A Crossroads for Bioplastics: Exploring Product Developers’ Challenges to Move beyond Petroleum-Based Plastics.” Journal of Cleaner Production, vol. 127, Elsevier Ltd, 2016, pp. 84–95, doi:10.1016/j.jclepro.2016.04.003.
  41. ↑ Sinha, E., et al. “Eutrophication Will Increase during the 21st Century as a Result of Precipitation Changes.” Science, vol. 357, no. July, 2017, pp. 405–08.
  42. ↑ Rosas, Francisco, et al. “Nitrous Oxide Emission Reductions from Cutting Excessive Nitrogen Fertilizer Applications.” Climatic Change, vol. 132, no. 2, 2015, pp. 353–67, doi:10.1007/s10584-015-1426-y.
  43. ↑ Gironi, F., and Vincenzo Piemonte. “Land-Use Change Emissions: How Green Are the Bioplastics?” Environmental Progress & Sustainable Energy, vol. 30, no. 4, 2010, pp. 685–691, doi:10.1002/ep.10518.
  44. ↑ Degli-Innocenti, Francesco. “Biodegradation of Plastics and Ecotoxicity Testing: When Should It Be Done.” Frontiers in Microbiology, vol. 5, no. SEP, 2014, pp. 1–3, doi:10.3389/fmicb.2014.00475.
  45. ↑ Gómez, Eddie F., and Frederick C. Michel. “Biodegradability of Conventional and Bio-Based Plastics and Natural Fiber Composites during Composting, Anaerobic Digestion and Long-Term Soil Incubation.” Polymer Degradation and Stability, vol. 98, no. 12, 2013, pp. 2583–2591., doi:10.1016/j.polymdegradstab.2013.09.018.
  46. 1 2 3 4 5 6 7 8 9 Emadian, S. Mehdi, et al. “Biodegradation of Bioplastics in Natural Environments.” Waste Management, vol. 59, Elsevier Ltd, 2017, pp. 526–36, doi:10.1016/j.wasman.2016.10.006.
  47. ↑ Barrett, Axel (5 September 2018). "The History and Most Important Innovations of Bioplastics". Bioplastics News.
  48. ↑ "Ready to Grow: The Biodegradable Polymers Market". Plastics Engineering. 72 (3): 1–4. March 2016. doi:10.1002/j.1941-9635.2016.tb01489.x. ISSN 0091-9578.
  49. ↑ Darby, Debra (August 2012). "Bioplastics Industry Report". Biocycle. 53 (8): 40–44 – via ProQuest.
  50. ↑ Rujnić-Sokele, Maja; Pilipović, Ana (September 2017). "Challenges and Opportunities of Biodegradable Plastics: A Mini Review". Waste Management and Research. 35 (2): 132–140. doi:10.1177/0734242x16683272 – via SAGE Journals.
  51. ↑ Pathak, Swathi (December 2014). "Bioplastic: Its Timeline Based Scenario & Challenges". Journal of Polymer and Biopolymer Physics Chemistry. SciEP. 2 (4): 84–90. doi:10.12691/jpbpc-2-4-5 – via SciePub.
  52. ↑ Dolfen, Julia. “Bioplastics- Opportunities and Challenges.” US Composting Council. 2012 Compostable Plastics Symposium, Jan. 2012, Austin, Texas, https://compostingcouncil.org/admin/wp-content/uploads/2012/01/Dolfen.pdf
  53. ↑ "Bioplastics Market Analysis, Market Size, Application Analysis, Regional Outlook, Competitive Strategies And Forecasts, 2016 To 2024". Market Research Results & Consulting. Grand View Research. 2015.
  54. ↑ Market Study Bioplastics, 3rd edition. Ceresana. Retrieved on 2014-11-25.
  55. ↑ "Global Market for Bioplastics to Grow by 20%". PlasticsToday. UBM Americas. 29 November 2017.
  56. ↑ "Ready to Grow: The Biodegradable Polymers Market". Plastics Engineering. 72 (3): 1–4. March 2016. doi:10.1002/j.1941-9635.2016.tb01489.x. ISSN 0091-9578.
  57. ↑ "Ready to Grow: The Biodegradable Polymers Market". Plastics Engineering. 72 (3): 1–4. March 2016. doi:10.1002/j.1941-9635.2016.tb01489.x. ISSN 0091-9578.
  58. 1 2 NNFCC Renewable Polymers Factsheet: Bioplastics — NNFCC. Nnfcc.co.uk (2010-02-19). Retrieved on 2011-08-14.
  59. ↑ Beckman, Eric (9 August 2018). "The World of Plastics, in Numbers". theconversation.com.
  60. ↑ Lampinen, Johanna (2010). "Trends in Bioplastics and Biocomposites". VTT Research Notes. VTT Technical Research Centre of Finland. 2558: 12–20.
  61. ↑ "Ready to Grow: The Biodegradable Polymers Market". Plastics Engineering. 72 (3): 1–4. March 2016. doi:10.1002/j.1941-9635.2016.tb01489.x. ISSN 0091-9578.
  62. ↑ "GLOBAL MARKET TRENDS AND INVESTMENTS IN POLYETHYLENE AND POLYPROPYLENE" (PDF).
  63. ↑ White, J. L. (December 1998). "Fourth in a Series: Pioneers of Polymer Processing Alexander Parkes". International Polymer Processing. 13 (4): 326–326. doi:10.3139/217.980326. ISSN 0930-777X.
  64. ↑ Mathew, Blessy Baby; NB, Krishnamurthy (2018). "Assessment of Lead Toxicity Using Drosophila melanogaster as a Model". Journal of Clinical Toxicology. 08 (02). doi:10.4172/2161-0495.1000380. ISSN 2161-0495.
  65. 1 2 3 4 Raschka, Achim; Carus, Michael; Piotrowski, Stephan (2013-10-04), "Renewable Raw Materials and Feedstock for Bioplastics", Bio-Based Plastics, John Wiley & Sons Ltd, pp. 331–345, ISBN 9781118676646, retrieved 2018-09-27
  66. ↑ "A Brief History of Plastic". The Brooklyn Rail. Retrieved 2018-09-27.
  67. ↑ "d-2016-154". 2016. doi:10.18411/d-2016-154.
  68. ↑ "A Brief History of Plastic". The Brooklyn Rail. Retrieved 2018-09-27.
  69. ↑ "New fibre could make stronger parts". Reinforced Plastics. 39 (5): 17. May 1995. doi:10.1016/0034-3617(95)91746-2. ISSN 0034-3617.
  70. ↑ "Novamont". Bioplastics News. 2013-12-30. Retrieved 2018-09-27.
  71. ↑ Poirier, Yves; Dennis, Douglas; Klomparens, Karen; Nawrath, Christiane; Somerville, Chris (December 1992). "Perspectives on the production of polyhydroxyalkanoates in plants". FEMS Microbiology Letters. 103 (2–4): 237–246. doi:10.1111/j.1574-6968.1992.tb05843.x. ISSN 0378-1097.
  72. ↑ Lörcks, Jürgen (January 1998). "Properties and applications of compostable starch-based plastic material". Polymer Degradation and Stability. 59 (1–3): 245–249. doi:10.1016/s0141-3910(97)00168-7. ISSN 0141-3910.
  73. ↑ "Monsanto finds buyer for oil and gas assets". Chemical & Engineering News. 63 (48): 5. 1985-12-02. doi:10.1021/cen-v063n048.p005a. ISSN 0009-2347.
  74. ↑ "The History and Most Important Innovations of Bioplastics". Bioplastics News. 2018-07-05. Retrieved 2018-09-27.
  75. ↑ Pennisi, Elizabeth (1992-05-16). "Natureworks". Science News. 141 (20): 328. doi:10.2307/3976489. ISSN 0036-8423.
  76. ↑ DiGregorio, Barry E. (January 2009). "Biobased Performance Bioplastic: Mirel". Chemistry & Biology. 16 (1): 1–2. doi:10.1016/j.chembiol.2009.01.001. ISSN 1074-5521.
  77. ↑ Rajam, Manchikatla V.; Yogindran, Sneha (2018), "Engineering Insect Resistance in Tomato by Transgenic Approaches", Sustainable Management of Arthropod Pests of Tomato, Elsevier, pp. 237–252, ISBN 9780128024416, retrieved 2018-09-27
  78. ↑ "Nanotube technology gains US patent". Reinforced Plastics. 48 (10): 17. November 2004. doi:10.1016/s0034-3617(04)00461-8. ISSN 0034-3617.
  79. ↑ Bayer, Ilker S.; Guzman-Puyol, Susana; Heredia-Guerrero, José Alejandro; Ceseracciu, Luca; Pignatelli, Francesca; Ruffilli, Roberta; Cingolani, Roberto; Athanassiou, Athanassia (2014-07-15). "Direct Transformation of Edible Vegetable Waste into Bioplastics". Macromolecules. 47 (15): 5135–5143. doi:10.1021/ma5008557. ISSN 0024-9297.
  80. ↑ Sharif Hossain, A.B.M.; Ibrahim, Nasir A.; AlEissa, Mohammed Saad (September 2016). "Nano-cellulose derived bioplastic biomaterial data for vehicle bio-bumper from banana peel waste biomass". Data in Brief. 8: 286–294. doi:10.1016/j.dib.2016.05.029. ISSN 2352-3409.
  81. ↑ Brodin, Malin; Vallejos, María; Opedal, Mihaela Tanase; Area, María Cristina; Chinga-Carrasco, Gary (September 2017). "Lignocellulosics as sustainable resources for production of bioplastics – A review". Journal of Cleaner Production. 162: 646–664. doi:10.1016/j.jclepro.2017.05.209. ISSN 0959-6526.
  82. ↑ Benvenuto, Mark A. (2018-01-20). "26 Biofuels and bioplastics". SPARK. Retrieved 2018-09-27.
  83. ↑ "Compostable.info". compostable.info.
  84. ↑ "ASTM D6002 - 96(2002)e1 Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics (Withdrawn 2011)". astm.org.
  85. ↑ "ASTM D6866 - 11 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis". Astm.org. Retrieved 2011-08-14.
  86. ↑ "NNFCC Newsletter – Issue 16. Understanding Bio-based Content — NNFCC". Nnfcc.co.uk. 2010-02-24. Retrieved 2011-08-14.
  87. ↑ "Braskem". Braskem. Retrieved 2011-08-14.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.