Space Shuttle Orbital Maneuvering System

The Space Shuttle Orbital Maneuvering System (OMS) is a system of hypergolic liquid-propellant rocket engines used on the Space Shuttle. Designed and manufactured in the United States by Aerojet,[1] the system allowed the orbiter to perform various orbital maneuvers according to requirements of each mission profile: orbital injection after main engine cutoff, orbital corrections during flight, and the final deorbit burn for reentry.[2] Rarely the OMS were actually ignited part-way into the Shuttle's main ascent for a few minutes to aid acceleration to orbital insertion (usually while carrying heavy ISS payloads). This occurred on STS-128 and STS-135.

"Orbital Maneuvering System" redirects here, but can refer to any system used to modify a spacecraft's orbit. For the similarly-named Gemini component, see Orbit Attitude and Maneuvering System.

Space Shuttle OMS/RCS Pod
The underside of a left OMS/RCS pod.
ManufacturerAerojet
Country of originUnited States
Used onSpace Shuttle
General characteristics
Length21.8 feet (6.6 m)
Width11.37 feet (3.47 m) (aft)
8.14 feet (2.48 m) (forward)
Launch history
StatusRetired
Total launches135
Successes
(stage only)		134
Lower stage
failed		1 (STS-51-L)
First flightSTS-1 (12 April 1981)
Last flightSTS-135 (8 July 2011)
OMS Engine
Engines1 AJ10-190
Thrust26.7 kilonewtons (6,000 lbf)
Specific impulse316 seconds (vacuum)
Burn time15 hours (maximum service life)
1250 seconds (deorbit burn)
150–250 seconds (typical burn)
FuelMMH/N2O4
Aft Primary RCS
EnginesPrimary RCS engines
Thrust3.87 kilonewtons (870 lbf)
Burn time1–150 seconds (each burn)
800 seconds (total)
FuelMMH/N2O4
Aft Vernier RCS
EnginesVernier RCS engines
Thrust106 newtons (24 lbf)
Burn time1–125 seconds (each burn)
FuelMMH/N2O4

The OMS consists of two pods mounted on the orbiter's aft fuselage, on either side of the vertical stabilizer.[2] Each pod contains a single AJ10-190 engine,[3] based on the Apollo Service Module's Service Propulsion System engine, which produces 26.7 kilonewtons (6,000 lbf) of thrust with a specific impulse (Isp) of 316 seconds.[3] Each engine could be reused for 100 missions and was capable of a total of 1,000 starts and 15 hours of burn time.

These pods also contained the Orbiter's aft set of reaction control system (RCS) engines, and so were referred to as OMS/RCS pods. The OM engine and RCS both burned monomethylhydrazine (MMH) as fuel, which was oxidized with dinitrogen tetroxide (N2O4), with the propellants being stored in tanks within the OMS/RCS pod, alongside other fuel and engine management systems.[4] When full, the pods together carried around 8,174 kilograms (18,021 lb) of MMH and 13,486 kilograms (29,732 lb) of N2O4, allowing the OMS to produce a total delta-v of around 1,000 feet per second (300 m/s) with a 65,000-pound (29,500 kg) payload.[4][5]

  • Diagram of OMS pod components
  • An OMS pod detached from an orbiter for maintenance

References
  1. D. Craig Judd (1992). "Capability and flight record of the versatile space shuttle OMS engine". NASA. Bibcode:1992spte.symp..107J. Cite journal requires |journal= (help)
  2. "Orbital Maneuvering System". NASA. 1998. Archived from the original on 29 June 2011.
  3. Encyclopedia Astronautica (2009). "OME". Encyclopedia Astronautica. Archived from the original on 13 January 2010. Retrieved 4 January 2010.
  4. NASA (1998). "Propellant Storage and Distribution". NASA. Retrieved 8 February 2008.
  5. David Palmer, Allie Cliffe and Tim Kallman (9 May 1997). "Spacecraft Fuel". NASA.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.