Portable computer

In 1973, the IBM Palo Alto Scientific Center developed a portable computer prototype called SCAMP (Special Computer APL Machine Portable) based on the IBM PALM processor with a Philips compact cassette drive, small CRT and full function keyboard. SCAMP emulated an IBM 1130 minicomputer in order to run APL\1130.[6] In 1973, APL was generally available only on mainframe computers, and most desktop sized microcomputers such as the Wang 2200 or HP 9800 offered only BASIC. Because SCAMP was the first to emulate APL\1130 performance on a portable, single user computer, PC Magazine in 1983 designated SCAMP a "revolutionary concept" and "the world's first personal computer".[7][8] The engineering prototype is in the Smithsonian Institution.

Successful demonstrations of the 1973 SCAMP prototype led to the first commercial IBM 5100 portable microcomputer launched in 1975. The product incorporated an IBM PALM processor, 5-inch (130 mm) CRT, full function keyboard and the ability to be programmed in both APL and BASIC for engineers, analysts, statisticians and other business problem-solvers. (IBM provided different models of the 5100 supporting only BASIC, only APL, or both selectable by a physical switch on the front panel.)[9][10] IBM referred to its PALM processor as a microprocessor, though they used that term to mean a processor that executes microcode to implement a higher-level instruction set, rather than its conventional definition of a complete processor on a single silicon integrated circuit; the PALM processor was a large circuit board populated with over a dozen chips. In the late 1960s, such a machine would have been nearly as large as two desks and would have weighed about half a ton (0.45 t). In comparison, the IBM 5100 weighed about 53 pounds (24 kg and very portable for that time).[11]

The MIT Suitcase Computer, constructed in 1975, was the first known microprocessor-based portable computer. It was based on the Motorola 6800. Constructed in a Samsonite suitcase approximately 20 by 30 by 8 inches (510 mm × 760 mm × 200 mm) and weighing approximately 20 lb (9.1 kg), it had 4K of SRAM, a serial port to accept downloaded software and connect to a modem, a keyboard and a 40-column thermal printer taken from a cash register. Built by student David Emberson in the MIT Digital Systems Laboratory as a thesis project, it never entered production. It is currently in the collection of Dr. Hoo-Min D. Toong.

Xerox NoteTaker, developed in 1976 at Xerox PARC, was a precursor to later portable computers from Osborne Computer Corporation and Compaq, though it remained a prototype and did not enter production.

An early portable computer was manufactured in 1979 by GM Research,[12] a small company in Santa Monica, California. The machine which was designed and patented by James Murez. It was called the Micro Star and later changed the name to The Small One. Although Xerox claims to have designed the first such system, the machine by Murez predated anything on the market or that had been documented in any publication at the time – hence the patent was issued. As early as 1979, the U.S. Government was contracting to purchase these machines. Other major customers included Sandia Labs, General Dynamics, BBN (featured on the cover of their annual report in 1980 as the C.A.T. system) and several dozen private individuals and companies around the world. In 1979, Adam Osborne viewed the machine along with several hundred other visitors at the first computer show that was sponsored by the IEEE Westec in Los Angeles. Later that year the machine was also shown at the first COMDEX show.

R2E CCMC Portal laptop in September 1980 at the SICOB show in PARIS

The portable micro computer the "Portal" of the French company R2E Micral CCMC officially appeared in September 1980 at the Sicob show in Paris. The Portal was a portable microcomputer designed and marketed by the studies and developments department of the French firm R2E Micral in 1980 at the request of the company CCMC specializing in payroll and accounting. The Portal was based on an intel 8085 processor, 8-bit, clocked at 2 MHz. It was equipped with a central 64 KB RAM, a keyboard with 58 alpha numeric keys and 11 numeric keys (separate blocks), a 32-character screen, a floppy disk: capacity = 140 000 characters, of a thermal printer: speed = 28 characters / sec, an asynchronous channel, a synchronous channel, a 220 V power supply. Designed for an operating temperature of 15–35 °C (59–95 °F), it weighed 12 kilograms (26 lb) and its dimensions were 45 cm × 45 cm × 15 cm (17.7 in × 17.7 in × 5.9 in). It provided total mobility. Its operating system was Prolog. A few hundred were sold between 1980 and 1983.

The first mass-produced microprocessor-based portable computer released in 1981 was the Osborne 1, developed by Osborne, which owed much to the NoteTaker's design. The company had early success with the design and went public but later due to small screen sizes and other devices being released found trouble selling the Osborne.

The Compass ran its own operating system, GRiD-OS. Its specialized software and high price (US$8,000–$10,000) meant that it was limited to specialized applications. The main buyer was the U.S. government. NASA used it on the Space Shuttle during the early 1980s, as it was powerful, lightweight, and compact. The military Special Forces also purchased the machine, as it could be used by paratroopers in combat.[13]

Another early portable computer released in 1982 was the Kaypro.

In January 1983, the first IBM PC compatible portable computer (and the first 100% IBM PC compatible, or "clone," of any kind) was the Compaq Portable.

The first full-color portable computer was the Commodore SX-64 in January 1984.

Apple Inc. introduced and released the Macintosh Portable in 1989.