Parallelepiped

Any of the three pairs of parallel faces can be viewed as the base planes of the prism. A parallelepiped has three sets of four parallel edges; the edges within each set are of equal length.

Parallelepipeds result from linear transformations of a cube (for the non-degenerate cases: the bijective linear transformations).

Since each face has point symmetry, a parallelepiped is a zonohedron. Also the whole parallelepiped has point symmetry C_i (see also triclinic). Each face is, seen from the outside, the mirror image of the opposite face. The faces are in general chiral, but the parallelepiped is not.

A space-filling tessellation is possible with congruent copies of any parallelepiped.

Parallelepiped, generated by three vectors

A parallelepiped can be considered as an oblique prism with a parallelogram as base. Hence the volume ${\displaystyle V}$ of a parallelepiped is the product of the base area ${\displaystyle B}$ and the height ${\displaystyle h}$ (see diagram). With

${\displaystyle B=|{\vec {a}}|\cdot |{\vec {b}}|\cdot \sin \gamma =|{\vec {a}}\times {\vec {b}}|~}$ (where ${\displaystyle \gamma }$ is the angle between vectors ${\displaystyle {\vec {a}}}$ and ${\displaystyle {\vec {b}}}$), and

${\displaystyle h=|{\vec {c}}|\cdot |\cos \theta ~|~}$ (where ${\displaystyle \theta }$ is the angle between vector ${\displaystyle {\vec {c}}}$ and the normal to the base), one gets:

${\displaystyle V=B\cdot h=(|{\vec {a}}||{\vec {b}}|\sin \gamma )\cdot |{\vec {c}}||\cos \theta ~|=|{\vec {a}}\times {\vec {b}}|~|{\vec {c}}|~|\cos \theta ~|=|({\vec {a}}\times {\vec {b}})\cdot {\vec {c}}|~.}$

The mixed product of three vectors is called triple product. It can be described by a determinant. Hence for ${\displaystyle {\vec {a}}=(a_{1},a_{2},a_{3})^{T},~{\vec {b}}=(b_{1},b_{2},b_{3})^{T},~{\vec {c}}=(c_{1},c_{2},c_{3})^{T},}$ the volume is:

(V1) ${\displaystyle \quad V=\left|\det {\begin{bmatrix}a_{1}&b_{1}&c_{1}\\a_{2}&b_{2}&c_{2}\\a_{3}&b_{3}&c_{3}\end{bmatrix}}\;\right|}$ .

An alternative representation of the volume uses geometric properties (angles and edge lengths) only:

(V2)${\displaystyle \quad V=abc{\sqrt {1+2\cos(\alpha )\cos(\beta )\cos(\gamma )-\cos ^{2}(\alpha )-\cos ^{2}(\beta )-\cos ^{2}(\gamma )}}}$ ,

where ${\displaystyle \ \alpha =\angle ({\vec {b}},{\vec {c}}),\;\beta =\angle ({\vec {a}},{\vec {c}}),\;\gamma =\angle ({\vec {a}},{\vec {b}}),\ }$ and ${\displaystyle a,b,c}$ are the edge lengths.

Proof of (V2)

The proof of (V2) uses properties of a determinant and the geometric interpretation of the dot product:

Let be ${\displaystyle M}$ the 3x3-matrix, whose columns are the vectors ${\displaystyle {\vec {a}},{\vec {b}},{\vec {c}}}$ (see above). Then the following is true:

${\displaystyle V^{2}=(\det M)^{2}=\det M\det M=\det M^{T}\det M=\det(M^{T}M)}$

${\displaystyle =\det {\begin{bmatrix}{\vec {a}}\cdot {\vec {a}}&{\vec {a}}\cdot {\vec {b}}&{\vec {a}}\cdot {\vec {c}}\\{\vec {b}}\cdot {\vec {a}}&{\vec {b}}\cdot {\vec {b}}&{\vec {b}}\cdot {\vec {c}}\\{\vec {c}}\cdot {\vec {a}}&{\vec {c}}\cdot {\vec {b}}&{\vec {c}}\cdot {\vec {c}}\end{bmatrix}}=\ a^{2}b^{2}c^{2}\;\left(1+2\cos(\alpha )\cos(\beta )\cos(\gamma )-\cos ^{2}(\alpha )-\cos ^{2}(\beta )-\cos ^{2}(\gamma )\right).}$

(The last step uses ${\displaystyle \ {\vec {a}}\cdot {\vec {a}}=a^{2},...,\;{\vec {a}}\cdot {\vec {b}}=ab\cos \gamma ,\;{\vec {a}}\cdot {\vec {c}}=ac\cos \beta ,\;{\vec {b}}\cdot {\vec {c}}=bc\cos \alpha ,...}$)

Corresponding tetrahedron

The volume of any tetrahedron that shares three converging edges of a parallelepiped is equal to one sixth of the volume of that parallelepiped (see proof).

The surface area of a parallelepiped is the sum of the areas of the bounding parallelograms:

${\displaystyle A=2\cdot \left(|{\vec {a}}\times {\vec {b}}|+|{\vec {a}}\times {\vec {c}}|+|{\vec {b}}\times {\vec {c}}|\right)}$

${\displaystyle =2(ab\sin \gamma +bc\sin \alpha +ca\sin \beta )\ }$.

(For labeling: see previous section.)

Octahedral symmetry subgroup relations with inversion center

Special cases of the parallelepiped

Form	Cube	Square cuboid	Trigonal trapezohedron	Rectangular cuboid	Right rhombic prism	Right parallelogrammic prism	Oblique rhombic prism
Constraints	${\displaystyle a=b=c}$ ${\displaystyle \alpha =\beta =\gamma =90^{\circ }}$	${\displaystyle a=b}$ ${\displaystyle \alpha =\beta =\gamma =90^{\circ }}$	${\displaystyle a=b=c}$ ${\displaystyle \alpha =\beta =\gamma }$	${\displaystyle \alpha =\beta =\gamma =90^{\circ }}$	${\displaystyle a=b}$ ${\displaystyle \alpha =\beta =90^{\circ }}$	${\displaystyle \alpha =\beta =90^{\circ }}$	${\displaystyle a=b}$ ${\displaystyle \alpha =\beta }$
Symmetry	Oh order 48	D4h order 16	D3d order 12	D2h order 8		C2h order 4
Image
Faces	6 squares	2 squares, 4 rectangles	6 rhombi	6 rectangles	4 rectangles, 2 rhombi	4 rectangles, 2 parallelograms	2 rhombi, 4 parallelograms

• The parallelepiped with O_h symmetry is known as a cube, which has six congruent square faces.
• The parallelepiped with D_4h symmetry is known as a square cuboid, which has two square faces and four congruent rectangular faces.
• The parallelepiped with D_3d symmetry is known as a trigonal trapezohedron, which has six congruent rhombic faces (also called an isohedral rhombohedron).
• For parallelepipeds with D_2h symmetry, there are two cases:
  • Rectangular cuboid: it has six rectangular faces (also called a rectangular parallelepiped, or sometimes simply a cuboid).
  • Right rhombic prism: it has two rhombic faces and four congruent rectangular faces.

Note: the fully rhombic special case, with two rhombic faces and four congruent square faces ${\displaystyle (a=b=c)}$, has the same name, and the same symmetry group (D_2h , order 8).

• For parallelepipeds with C_2h symmetry, there are two cases:
  • Right parallelogrammic prism: it has four rectangular faces and two parallelogrammic faces.
  • Oblique rhombic prism: it has two rhombic faces, while of the other faces, two adjacent ones are equal and the other two also (the two pairs are each other's mirror image).

A perfect parallelepiped is a parallelepiped with integer-length edges, face diagonals, and space diagonals. In 2009, dozens of perfect parallelepipeds were shown to exist,[2] answering an open question of Richard Guy. One example has edges 271, 106, and 103, minor face diagonals 101, 266, and 255, major face diagonals 183, 312, and 323, and space diagonals 374, 300, 278, and 272.

Some perfect parallelopipeds having two rectangular faces are known. But it is not known whether there exist any with all faces rectangular; such a case would be called a perfect cuboid.

Coxeter called the generalization of a parallelepiped in higher dimensions a parallelotope.

Specifically in n-dimensional space it is called n-dimensional parallelotope, or simply n-parallelotope. Thus a parallelogram is a 2-parallelotope and a parallelepiped is a 3-parallelotope.

More generally a parallelotope,[3] or voronoi parallelotope, has parallel and congruent opposite facets. So a 2-parallelotope is a parallelogon which can also include certain hexagons, and a 3-parallelotope is a parallelohedron, including 5 types of polyhedra.

The diagonals of an n-parallelotope intersect at one point and are bisected by this point. Inversion in this point leaves the n-parallelotope unchanged. See also fixed points of isometry groups in Euclidean space.

The edges radiating from one vertex of a k-parallelotope form a k-frame ${\displaystyle (v_{1},\ldots ,v_{n})}$ of the vector space, and the parallelotope can be recovered from these vectors, by taking linear combinations of the vectors, with weights between 0 and 1.

The n-volume of an n-parallelotope embedded in ${\displaystyle \mathbb {R} ^{m}}$ where ${\displaystyle m\geq n}$ can be computed by means of the Gram determinant. Alternatively, the volume is the norm of the exterior product of the vectors:

${\displaystyle V=\left\|v_{1}\wedge \cdots \wedge v_{n}\right\|.}$

If m = n, this amounts to the absolute value of the determinant of the n vectors.

Another formula to compute the volume of an n-parallelotope P in ${\displaystyle \mathbb {R} ^{n}}$, whose n + 1 vertices are ${\displaystyle V_{0},V_{1},\ldots ,V_{n}}$, is

${\displaystyle {\rm {Vol}}(P)=|{\rm {det}}\ ([V_{0}\ 1]^{\rm {T}},[V_{1}\ 1]^{\rm {T}},\ldots ,[V_{n}\ 1]^{\rm {T}})|,}$

where ${\displaystyle [V_{i}\ 1]}$ is the row vector formed by the concatenation of ${\displaystyle V_{i}}$ and 1. Indeed, the determinant is unchanged if ${\displaystyle [V_{0}\ 1]}$ is subtracted from ${\displaystyle [V_{i}\ 1]}$ (i > 0), and placing ${\displaystyle [V_{0}\ 1]}$ in the last position only changes its sign.

Similarly, the volume of any n-simplex that shares n converging edges of a parallelotope has a volume equal to one 1/n! of the volume of that parallelotope.

The word appears as parallelipipedon in Sir Henry Billingsley's translation of Euclid's Elements, dated 1570. In the 1644 edition of his Cursus mathematicus, Pierre Hérigone used the spelling parallelepipedum. The Oxford English Dictionary cites the present-day parallelepiped as first appearing in Walter Charleton's Chorea gigantum (1663).

Charles Hutton's Dictionary (1795) shows parallelopiped and parallelopipedon, showing the influence of the combining form parallelo-, as if the second element were pipedon rather than epipedon. Noah Webster (1806) includes the spelling parallelopiped. The 1989 edition of the Oxford English Dictionary describes parallelopiped (and parallelipiped) explicitly as incorrect forms, but these are listed without comment in the 2004 edition, and only pronunciations with the emphasis on the fifth syllable pi (/paɪ/) are given.

A change away from the traditional pronunciation has hidden the different partition suggested by the Greek roots, with epi- ("on") and pedon ("ground") combining to give epiped, a flat "plane". Thus the faces of a parallelepiped are planar, with opposite faces being parallel.

• Lists of shapes

• Coxeter, H. S. M. Regular Polytopes, 3rd ed. New York: Dover, p. 122, 1973. (He defines parallelotope as a generalization of a parallelogram and parallelepiped in n-dimensions.)

Look up parallelepiped in Wiktionary, the free dictionary.

Wikimedia Commons has media related to Parallelepipeds.

• Weisstein, Eric W. "Parallelepiped". MathWorld.
• Weisstein, Eric W. "Parallelotope". MathWorld.
• Paper model parallelepiped (net)