ISO 1

ISO 1 is an international standard set by the International Organization for Standardization that specifies the standard reference temperature for geometrical product specification and verification. The temperature is fixed at 20 °C, which is equal to 293.15 kelvin and 68 degrees Fahrenheit.[1]

Due to thermal expansion, precision length measurements need to be made at (or converted to) a defined temperature. ISO 1 helps in comparing measurements by defining such a reference temperature. The reference temperature of 20 °C was adopted by the CIPM on 15 April 1931, and became ISO recommendation number 1 in 1951.[2] It soon replaced worldwide other reference temperatures for length measurements that manufacturers of precision equipment had used before, including 0 °C, 62 °F, and 25 °C. Among the reasons for choosing 20 °C was that this was a comfortable and practical workshop temperature and that it resulted in an integer value on both the Celsius and Fahrenheit scales.

See also

References

  1. "ISO 1:2016 - Geometrical product specifications (GPS) -- Standard reference temperature for the specification of geometrical and dimensional properties". Iso.org. 2016-08-26. Retrieved 2016-09-15.
  2. Ted Doiron: 20 °C—A Short History of the Standard Reference Temperature for Industrial Dimensional Measurements Archived 2013-02-17 at the Wayback Machine. Journal of Research of the National Institute of Standards and Technology, Vol. 112, No. 1, January–February 2007.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.