Centre for Nanoscience and Quantum Information

The Centre for Nanoscience and Quantum Information (informally, NSQI) is a research centre within the University of Bristol. The centre was initially built as an intra-university facility, but was absorbed into the portfolio of the School of Physics in 2016. The centre officially opened in 2009,[2] the Centre was designed to provide a unique ultra-low-vibration research space, making the labs some of the quietest in the world.[3][4]

Centre for Nanoscience and Quantum Information
@ The University of Bristol
Established7 September 2009 (2009-09-07)
Research type
  • Basic
  • Applied
  • Unclassified
Field of research
DirectorProf. Meryn Miles, FRS
Faculty
    • Science
    • Engineering
  • Medicine & Veterinary Science
  • Medicine and Dentistry
Staff6
LocationBristol, England, UK
51°27′32″N 02°36′6″W
NicknameNSQI
Affiliations
Operating agency
University of Bristol
Websitewww.bristol.ac.uk/nsqi-centre/

The Building

Building layout

The building is split across four floors:[5]

  • Basement: is entirely for the most sensitive experimental work, with seven low noise labs, two ultra-low noise labs, an anechoic chamber and a class 1000 cleanroom, as well as three prep labs.
  • Ground Floor: has two Quantum Information labs (with less stringent noise requirements), staff offices (including an office dedicated for users of the NanoESCA facility contained in the NSQI basement) plus a seminar room and large, bright, open foyer and coffee area.
  • First Floor: houses researchers, students and operations staff associated with QETLabs, the QE-CDT and affiliated quantum technologies groups.
  • Second Floor: contains another office and a large Quantum Engineering Technology lab; a main interdisciplinary communal lab containing a clean room area and several annex labs.
  • Third Floor: location of the main switch room and plant room for all the Centre services (water tanks, boilers, air handling units etc.).

Building design features

The building was designed by Percy Thomas of Capita Architecture,[6] in 2004 and built by Willmott Dixon.[7] The primary requirement for the building was that it be a low-noise research environment, stable enough to allow researchers to take measurements at subnanometre and subnanoNewton resolution, despite other activities going on around them.[8] The criteria set for the research space exceeded any standard curve (VC curves) and required significant design and engineering solutions.

"The new Bristol Centre will serve as a commendable and viable construct for interdisciplinary research; its ultimate goal is to move to new shores and new territories."

Nobel laureate Heinrich Rohrer, 2010, at the Scientific Opeining of the Centre.

Low vibrations

The primary source of noise for researchers at the nanoscale is mechanical vibration. Activities within a building generate noise that can travel through the structure and vibrations created outside (such as from road traffic) can travel through the ground and enter the building. A variety of methods were employed to reduce vibration generation, travel and entry into the lab space:

  • The main structure of the building is massive,[9] 2.0 m-thick concrete foundations and 0.5 m-thick concrete floors.
  • All plant machinery is removed to the third floor, as far from the lab space as possible.
  • All services and plant machinery is suspended on springs, rubber pads or damper pads to reduce coupling between the mechanism and the building.
  • All services are balanced to reduce turbulence within pipe and ductwork.
  • All corridors are floating, separate from the main structure, stopping vibrations crossing the floor and major foot traffic from affecting the building.
  • The lift shaft is decoupled from the building structure.
  • The building is decoupled from the building next door.
  • All services pass through a flexible hose coupling before entering the low noise labs.
  • All Low noise labs have a seven tonne concrete isolation block set on damper pads, within the ground slab. This is the experimental space, with lower vibrations than the surrounding floor and allowing experiments to continue while the researcher walks around within the lab.[10]
  • Both ultra-low noise labs have either a 23-tonne or 27-tonne concrete isolation block supported by pneumatic rams. The block is T-shaped in cross-section, to keep the centre of gravity lower (reducing wobble within the block). The block is surrounded by a floating floor, so that researchers can use the room while experiments are taking place.[11]
  • To further reduce the noise in the ultra-low noise labs, control equipment can be removed from the room and installed in the neighbouring control room. The control room has its own isolation block and is heavily soundproofed. Conduits allow cables to run between the labs, allowing the experiment to be completely run from the control room.

Soundproofing

Acoustic noise within the building is countered through several measures. Most importantly, experimental rooms are far from the busy University precinct, underground and in an area that is not used for teaching, or as a thoroughfare. The thickness of the floor ensures that little sound penetrates across and the walls between labs and doors of the labs are soundproof. The plant machinery is removed as far from the labs as possible, on the top floor, and the services are tuned as precisely as possible to reduce any sounds from the water supply, chilled water system or air vents.

Low electrical noise

Many of the experiments planned for the Centre involve recording tiny electrical currents (as low as a few picoAmps) so electrical noise is seen as a serious problem. Each basement research lab is a full Faraday cage, all service pipework changes to plastic before entering the lab and no Category 5 cable (cat5e) is used in data network, optical fibre is used instead. All labs are also supplied with an independent earth and 'clean' power supply, the mains having been filtered by a 1:1 transformer.

Interdisciplinary space

In addition to providing state-of-the-art low noise spaces, the building is also designed to encourage collaboration and interdisciplinary research. This includes plenty of meeting spaces and a light & spacious foyer/coffee area.

Centre Staff

  • Technical Manager - Steve Neck
  • Deputy Technical Manager - Caroline Jarrett
  • Administration/Reception - Alex Martin

References

  1. "UCLA's CNSI, British nanoscience center sign agreement to further research collaborations". California NanoSystems Institute, UCLA. Retrieved 7 November 2011.
  2. "Official opening of the Centre for Nanoscience & Quantum Information". University of Bristol. Retrieved 7 November 2011.
  3. "'Quietest building in the world' officially opens". Capita Symonds. Retrieved 8 November 2011.
  4. "Visiting the quietest building in the world". Institute of Physics. Retrieved 10 November 2011.
  5. "Facilities at the Centre for Nanoscience & Quantum Information". NSQI, University of Bristol. Archived from the original on 26 August 2011. Retrieved 3 November 2011.
  6. "Capita Architecture". Capita Architecturel. Retrieved 7 November 2011.
  7. "Higher Education Profile" (PDF). Willmott Dixon. p. 11. Archived from the original (PDF) on 9 April 2011. Retrieved 7 November 2011.
  8. Tickle, Louise (5 January 2010). "Delicate science". London: The Guardian. Retrieved 7 November 2011.
  9. "New centre for Nano-science and Quantum Information, University of Bristol". Natural Architecture. Archived from the original on 25 April 2012. Retrieved 7 November 2011.
  10. "Low noise lab facilities at the Centre for Nanoscience & Quantum Information". NSQI, University of Bristol. Archived from the original on 24 August 2011. Retrieved 3 November 2011.
  11. "Ultra low noise lab facilities at the Centre for Nanoscience & Quantum Information". NSQI, University of Bristol. Archived from the original on 21 August 2011. Retrieved 3 November 2011.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.