Centenary Bridge

The Centenary Bridge is a motorway crossing of the Brisbane River. As it forms part of Brisbane's Centenary Motorway, it is used primarily by vehicular traffic, although it includes footpaths for pedestrian traffic.

Centenary
Centenary Bridge
Coordinates	27.527701°S 152.946993°E / -27.527701; 152.946993
Carries	Motor vehicles, pedestrians and cyclists
Crosses	Brisbane River
Locale	Brisbane, Queensland, Australia
Characteristics
Material	Concrete
No. of spans	6
History
Opened	1964

Built to service the new Centenary Suburbs of Jindalee, Mount Ommaney and Westlake, the original two lane bridge opened in 1964.[1][2] It was financed by the developers of the suburbs, LJ Hooker.[3]

The bridge was duplicated as part of an upgrade of the Centenary Highway and Western Freeway south of Mount Cootha Road. The works were officially opened by Russell Hinze, Minister for Main Roads, on 27 March 1987.[4]

During the 1974 floods, the bridge was badly damaged when a barge rammed into its upstream side. The barge blocked the flow of floodwaters under the bridge and there were real fears that the bridge would collapse. The barge was deliberately holed using explosives and allowed to sink to reduce the floodwater pressure on the bridge. When the floodwater receded, the barge was refloated and beached downstream near Fig Tree Pocket to be cut up for scrap. The damage sustained by the bridge required its partial closure for repairs. For two years after the floods, the bridge was reduced to a single lane, with one way traffic controlled by traffic lights at each end of the bridge.