Skimmer (machine)
An oil skimmer is a device that is designed to remove oil floating on a liquid surface. Depending on the specific design they are used for a variety of applications such as oil spill response, as a part of oily water treatment systems, removing oil from machine tool coolant and aqueous parts washers, and collecting fats oils and greases in wastewater treatment in food manufacturing industries.
Oil skimmers were used to great effect to assist in the remediation of the Exxon Valdez spill in 1989. Oil skimmers are different to Swimming pool sanitation skimmers that are designed for a related but different purpose.
Limitation and design factors
There are many different types of oil skimmer. Each type has different design features and therefore results in different applications and use. It is important to understand the design features before employing a particular skimmer type.
Some factors to consider are:
- Oil removal flow rate: Alternative Skimmer designs have different oil removal flow rates. Volume removal rates for Oleophilic skimmer types (drum, brush, disc, belt) are comparatively low. Weir type skimmers are capable of very high oil and water removal rates. ASTM F2709 standard establishes the test procedure for determining oil recovery rate (ORR).
- Oil removal concentration: It is a common misconception that oil skimmers remove concentrated or pure 'oil'; when in fact they remove a mixture of oil and water. In most situations the 'oil' mixture removed is an emulsion of oil and water more like a 'mousse'. Oleophilic and Non-Oleophilic skimmers can provide a more concentrated oil in the removal stream, however still collect entrained water.
- Effectiveness with different oils: Oleophilic and Non-Oleophilic skimmers are not equally effective with all oil types due to the changing nature of the attraction forces with different oils and materials.
- Effectiveness with chemicals in the water: Oleophilic skimmers may not work as effectively if there are detergents, cleaners or other surfactants in the water that interfere with the oleophilic attraction. Weir skimmers are not affected by chemicals.
- Effects of trash and debris: Trash and debris may block or interfere with the operation of oil skimmers.
- Skimming direction: Some skimmers only remove oil from one direction. In some situations, such as skimming from pits and tanks, it can be important to remove oil from all directions.
- Service Access: Some skimmers such as disc skimmers, or weir skimmers with skimmer mounted pumps, contain heavy serviceable items of equipment mounted on the skimmer. This may require special lifting equipment and confined space entry safety considerations before servicing.
Applications
The use of skimmers in industrial applications is often required to remove oils, grease and fats prior to further treatment for environmental discharge compliance. By removing the top layer of oils, water stagnation, smell and unsightly surface scum can be reduced. Placed before an oily water treatment system an oil skimmer may give greater overall oil separation efficiency for improved discharge wastewater quality. It should be noted that all oil skimmers will pick up a percentage of water with the oil which will need to be decanted to obtain concentrated oil.
Types
There are four main types of oil skimmer: weir (manual or self-adjusting) and belt and oleophilic and non-oleophilic (disc, drum, belt, tube, brush,mop, grooved disc, grooved drum):
Weir
Weir skimmers function by allowing the oil floating on the surface of the water to flow over a weir. There are two main types of weir skimmer, those that require the weir height to be manually adjusted and those where the weir height is automatic or self-adjusting.[1] Whilst manually adjusted weir skimmer types can have a lower initial cost, the requirement for regular manual adjustment makes self-adjusting weir types more popular in most applications. Weir skimmers will collect water if operating when oil is no longer present. To overcome this limitation most weir type skimmers contain an automatic water drain on the oil collection tank.
.
Belt
Belt oil skimmers is one of the most reliable and economical equipment removing liquid surface floating oil, low electric consumption, no need any consumable, can effective remove all kinds of floating oil (contain machine oil, kerosene, diesel oil, lubricating oil,plant oil and other liquid specific weight less than water, no matter the water surface oil layer thick or thin, all can absorb), can make oil-water separation and waste oil reuse, its principle is adopt different gravity and surface tension etc characteristic, when the oil skimming belt pass water surface can absorb and take away the surface all kinds of floating oil.
Oleophilic
Oleophilic skimmers function by using an element such as a drum, disc, rope or mop to which the oil adheres. The oil is wiped from the oleophilic surface and collected in a tank. As the oil is adhering to a collection surface the amount of water collected when oil is not present will be limited.
Non-oleophilic
Non-oleophilic skimmers are distinguished by the component used to collect the oil. A metal disc, belt or drum is used in applications where an oleophilic material is inappropriate, such as in a hot alkaline aqueous parts washer.[2] The skimmer is generally turned off whenever there is no oil to skim thus minimizing the amount of water collected. Metal skimming elements are nearly as efficient as oleophilic skimmers when oil is present.
Wendy Schmidt Challenge
Some oil skimming designs entered the Wendy Schmidt Oil Cleanup X CHALLENGE in 2011. The winning technology utilized Grooves placed on the surface of rotating discs manufactured by Elastec Inc of the USA. The revolutionary oil skimming technology won the X Prize Foundation’s Wendy Schmidt Oil Cleanup X CHALLENGE by recovering oil at a rate of 4,760 gallons per minute and an oil-to-water efficiency rate of 89.5% [3]