Shudehill Mill

Shudehill Mill
Location within Greater Manchester
Cotton
Alternative names Simpson's Mill, Old Mill
Arkwright mill
Structural system wooden floored
Owner Arkwright, Whittenbury, Brocklebank, Simpson and Simpson
Further ownership
  • 1786 (Simpson and Simpson)
Coordinates 53°29′14″N 2°14′12″W / 53.4872°N 2.2366°W / 53.4872; -2.2366Coordinates: 53°29′14″N 2°14′12″W / 53.4872°N 2.2366°W / 53.4872; -2.2366
Construction
Renovated
  • 1:1854 (After fire)
Demolished 1940
Floor count 5
Floor area 60.9m X 9.1m
Power
Engine maker Hunt
Engine type Atmospheric steam engines
Water Power
Diameter / width of water wheel 9.1 m / 2.4 m
Date 1782
References
Williams & Farnie 1992, pp. 50,51

Shudehill Mill or Simpson's Mill was a very early cotton mill in Manchester city centre, England. It was built in 1782 by for Richard Arkwright and his partners and destroyed by fire in 1854. It was rebuilt and finally destroyed during the Manchester Blitz in 1940. One of Arkwright's larger mills, it was built three years before his patent lapsed. The mill had a 30 feet diameter water wheel and a Newcomen atmospheric engine was installed. Doubts remain as to why the engine was installed, whether it was a failed attempt to power a mill directly by steam or was modified to assist the wheel. It is possible that this engine, constructed by Hunt,[1] could have been one of the 13 engines installed in Manchester mills by Joshua Wrigley.[2] Water from the upper storage pond turned the water wheel to drive the mill. The steam engine recycled water from the lower storage pond to the upper storage pond.[3] Three more Boulton and Watt engines were installed to power the increasing number of spindles.

Location

Shudehill is in the centre of Manchester, near its highest point. Shudehill Mill was built between Miller Street and Angel Street to the north of Rochdale Road; its site is now a car park. The River Irwell and Mersey had been made navigable to Manchester in the 1720s opening the way for importing raw cotton and exporting finished cloth and the Bridgewater Canal brought coal from the Worsley Navigable Levels to the Castlefield Basin after 1761. Arkwright had patented a water frame to spin cotton, and in 1775 patented a mechanical carding engine. He took out a second patent that year for drawing and roving.[4] All the pieces were in place for a large automated spinning mill to be built in Manchester. Shudehill Mill, a watermill, was next to a stream, but derived its power from cycling water between two storage ponds, a steam pump was used to replenish the upper pond from the lower.

Shudehill Mill was close to three of Manchester's great stations, Manchester Victoria railway station, Manchester Exchange railway station and Oldham Road railway station. Shudehill Interchange is the present metro station. The mill itself would lie under the shadow of the CIS Tower. The Shudehill Conservation Area is the other side of the tower.

History

The site was originally used as a brick works; it was purchased in 1781, by Arkwright and his partners. Simpsons Mill was a five storey, Arkwright type mill 9.1 m wide and 60.9m long. It housed water frames, carding machines and roving and drawing frames using designs patented by Arkwright. It was driven by a 9.1 m diameter waterwheel driven from the upper storage pond. A steam engine drove a water pump to send the water back to the upper pond. It is thought that the steam engine was of the Newcomen type,[4] though some sources speculate that it could have been of the Savery type. The pump had two cylinders, 31 inches (79 cm) in diameter and a stroke of 93 inches (240 cm) — the steam cylinder was 64 inches (160 cm) in diameter. It operated at 11-12 strokes per minute. It used 5 tonnes of coal a day. It was perhaps because of this excessive coal consumption, that it was supplemented in 1790 with a 6 hp, Boulton and Watt rotative engine. They ran 4,000 spindles. A year later in 1791 they ordered a 40 hp rotative engine to replace them. This was the largest engine that Boulton and Watt had made at that time, and it was operating by the end of the summer in 1792. .[5] A further 30 hp Boulton and Watt was bought in 1799.[6] The mill was destroyed by fire in 1854.

By 1888 it had been rebuilt using many of the original walls. It was at this stage that two extra storeys were added. The two reservoirs were filled in- it operated under steam. Then in October 1892, the mill was sold to Baxendale and Co., a firm of engineers and plumbers' merchants. They described 'the structure, of the mill, was massive brickwork with very heavy wooden floors supported by corbels in the walls.' They redeveloped the site. By 1908 the main building was subdivided. Baxendales mill was destroyed by enemy action on the night of 23 October 1940. The site remained derelict until it was redeveloped by NCP as a car-park.[6]

Architecture

Simpsons Mill was a five storey, Arkwright type mill said to be 9.1 m wide and 60.9m long. Baxendaleś mill was seven storeys, and used the same massive walls. In 2004, an archaeological dig was done on the site to try to solve some outstanding questions. It had been claimed that the Newcomen engine was not used as a pumping engine, but was an attempt that failed to power the mill directly from steam. The original width of the first mill was in doubt, and the position of the wheel pit not known. The results suggest that the mill was always 12m wide, and the wheel pit was internal to the mill. The original function of the Newcomen engine remains undecided.[7]

Power

  • The mill was powered by a 9.1m water wheel, with the water being recycled by engine to the top reservoir. A form of pump-storage.
  • This was supplemented, or assisted by a Newcomen engine built by Hunt.
  • A 6 hp Bolton and Watt replaced or supplemented the Newcomen engine
  • A 40 hp Bolton and Watt was introduced to power more spindles
  • A 30 hp Bolton and Watt was introduced to power more spindles

The engine house and the chimney were detached from the mill, though a later engine house may have been built adjacent to the centre on the eastern side.

See also

References

Notes
Bibliography

  • Ashmore, Owen (1982). The industrial archaeology of North-west England. Manchester University Press. ISBN 0-7190-0820-4. Retrieved 2009-06-25.
  • Hills, Richard Leslie (1989). Power from Steam A History of the Stationary Steam Engine. Cambridge University Press,. p. 244. ISBN 9780521458344.
  • Wessex (2004). Arkwright's Mill, NCP Car Park, Miller Street, Manchester Archaeological Evaluation and Assessment of Results. Salisbury: Wessex Archaeology. Retrieved 2009-07-06.
  • Williams, Mike; Farnie, DA (1992). Cotton Mills of Greater Manchester. Carnegie Publishing. ISBN 0-948789-89-1.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.