Riverland Pipeline

Riverland Pipeline
Location
Country Australia
State South Australia
General direction West–east
From Angaston
Passes through Sedan
To Berri
General information
Owner Australian Gas Networks
Operator APA Group
Construction started 1994
Commissioned 1995
Technical information
Length 237 km (147 mi)
Diameter 114.3 mm (5 in)

The Riverland Pipeline System is a natural gas transmission pipeline supplying gas to the Riverland region of South Australia. It is owned by Australian Gas Networks (formerly Envestra) and operated by the APA Group. The pipeline was built in 1995 by South Australian Gas Company and transferred to Envestra when it was privatised in 1997.[1] The pipeline is a buried steel pipeline with nominal outside diameter of 114.3 millimetres (4.50 in) with 3.0 millimetres (0.12 in) wall thickness.The Maximum Allowable Operating Pressure is 10,000 kilopascals (1,500 psi). Most of the pipe is buried to a depth of 600–900 millimetres (24–35 in) but it is deeper and has thicker walls in areas of high risk such as under road crossings.[2]

The Riverland Pipeline is supplied by gas from the Angaston lateral on the Moomba Adelaide Pipeline System (MAPS). The main pipeline runs from Angaston to Berri in the Riverland with a lateral supply line branching near Sedan to Murray Bridge. Gas can also be delivered to Mildura vie the Mildura Pipeline connection at Berri.[1]

The Riverland Pipeline was covered by the NGL under the Gas Code until 1999, but has not been subject to that regulation since 1999.[1]

References

  1. 1 2 3 "SA: Riverland Pipeline System". Australian Energy Market Commission. Retrieved 10 February 2017.
  2. ↑ "ANGASTON TO BERRI TRANSMISSION PIPELINE AND MURRAY BRIDGE LATERAL PIPELINE (RIVERLAND PIPELINE – PL6) STATEMENT OF ENVIRONMENTAL OBJECTIVES" (PDF). December 2003. Retrieved 10 February 2017.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.