RS-27

RS-27
Country of origin United States
Date 1974
Designer Rocketdyne
Manufacturer Rocketdyne
Application Booster
Predecessor H-1
Successor RS-27A, RS-56
Status Retired
Liquid-fuel engine
Propellant LOX / RP-1
Cycle Gas Generator
Configuration
Chamber 1
Performance
Thrust (vac.) 1,023 kN (230,000 lbf)
Thrust (SL) 971 kN (218,000 lbf)
Chamber pressure 4.9 MPa (49 bar)
Isp (vac.) 295 seconds (2.89 km/s)
Isp (SL) 264 seconds (2.59 km/s)
Burn time 274 Sec
Dimensions
Length 3.63 m (11.9 ft)
Diameter 1.07 m (3.51 ft)
Dry weight 1,027 kg (2,264 lb)
Used in
Delta 2000, 3000, 5000, 6000, first stage[1]

The RS-27 is a liquid-propellant rocket engine developed in 1974 by Rocketdyne to replace the aging MB-3 in the Delta. Incorporating components of the venerable MB-3 and the H-1 designs, the RS-27 was a modernized version of the basic design used for two decades. It was used to power the first stage of the Delta 2000, 3000, 5000, and the first model of the Delta II, the Delta 6000.

The RS-27 was a modified Rocketdyne H-1 built to power the first stage of the Saturn I and Saturn IB and replaced the MB-3 engine that had been used on previous versions of the Delta launcher. NASA had a large supply of surplus H-1 engines in the early 1970s, as the Apollo program was ending.[2][3] In addition to its main engine, the RS-27 included two vernier engines to provide vehicle roll control during flight. RS-27 was later developed into the RS-27A and RS-56.[4][5]

References

  1. "Delta". Astronautix. Archived from the original on May 22, 2013. Retrieved March 5, 2015.
  2. "RS-27". Astronautix. Archived from the original on August 13, 2011. Retrieved March 5, 2015.
  3. "Extended Long Tank Delta". SpaceLaunchReport.com. Retrieved March 5, 2015.
  4. "Atlas IIA(S) Data Sheet". Space Launch Report. Retrieved 9 January 2016.
  5. "RS-27A". Astronautix. Archived from the original on 5 August 2014. Retrieved 10 January 2016.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.