In-phase and quadrature components

In electrical engineering, a sinusoid with angle modulation can be decomposed into, or synthesized from, two amplitude-modulated sinusoids that are offset in phase by one-quarter cycle (π/2 radians). All three functions have the same frequency. The amplitude modulated sinusoids are known as in-phase and quadrature components.[1]  In some contexts it is more convenient to refer to only the amplitude modulation (baseband) itself by those terms.[2]

Example of how an angle-modulated sinusoid can be decomposed into or synthesized from two amplitude-modulated sinusoids. The picture shows a modulation by non-linearly increasing the phase angle of the carrier from 0 to π/2 over the interval 0 < t < 16. The two AM sinusoids have the same nominal frequency as the carrier and are offset in phase by one-quarter cycle (π/2 radians). They are known as the in-phase component (I, thin blue, decreasing) and the quadrature component (Q, thin red, increasing).

Concept

In vector analysis, a vector with polar coordinates A,φ and Cartesian coordinates x = A cos(φ), y = A sin(φ), can be represented as the sum of orthogonal "components": [x,0] + [0,y]. Similarly in trigonometry, the expression sin(x + φ) can be represented by sin(x) cos(φ) + sin(x + π/2) sin(φ). And in functional analysis, when x is a linear function of some variable, such as time, these components are sinusoids, and they are orthogonal functions. When φ = 0, sin(x + φ) reduces to just the in-phase component sin(x) cos(φ), and the quadrature component sin(x + π/2) sin(φ) is zero.

A phase-shift of x → x + π/2 changes the identity to cos(x + φ) = cos(x) cos(φ) + cos(x + π/2) sin(φ), in which case cos(x) cos(φ) is the in-phase component. In both conventions cos(φ) is the in-phase amplitude modulation, which explains why some authors refer to it as the actual in-phase component. We can also observe that in both conventions the quadrature component leads the in-phase component by one-quarter cycle.

When a sinusoidal voltage is applied to either a simple capacitor or inductor, the resultant current that flows is "in quadrature" with the voltage.

Alternating current (AC) circuits

The term alternating current applies to a voltage vs. time function that is sinusoidal with a frequency . When it is applied to a typical circuit or device, it causes a current that is also sinusoidal. In general there is a constant phase difference, φ, between any two sinusoids. The input sinusoidal voltage is usually defined to have zero phase, meaning that it is arbitrarily chosen as a convenient time reference. So the phase difference is attributed to the current function, e.g. , whose orthogonal components are and , as we have seen. When φ happens to be such that the in-phase component is zero, the current and voltage sinusoids are said to be in quadrature, which means they are orthogonal to each other. In that case, no electrical power is consumed. Rather it is temporarily stored by the device and given back, once every ​1⁄f seconds. Note that the term in quadrature only implies that two sinusoids are orthogonal, not that they are components of another sinusoid.

Narrowband signal model

In an angle modulation application, with carrier frequency ƒ,  is also a time-variant function, giving:

When all three terms above are multiplied by an optional amplitude function, A(t) > 0,  the left-hand side of the equality is known as the amplitude/phase form, and the right-hand side is the quadrature-carrier or IQ form. Because of the modulation, the components are no longer completely orthogonal functions. But when A(t) and are slowly varying functions compared to   the assumption of orthogonality is a common one. Authors often call it a narrowband assumption, or a narrowband signal model.[3][4]  Orthogonality is important in many applications, including demodulation, direction-finding, and bandpass sampling.

See also

References

  1. ↑ Gast, Matthew (2005-05-02). 802.11 Wireless Networks: The Definitive Guide. 1 (2 ed.). Sebastopol,CA: O'Reilly Media. p. 284. ISBN 0596100523.
  2. ↑ Franks, L.E. (September 1969). Signal Theory. Information theory. Englewood Cliffs, NJ: Prentice Hall. p. 82. ISBN 0138100772.
  3. ↑ Wade, Graham (1994-09-30). Signal Coding and Processing. 1 (2 ed.). Cambridge University Press. p. 10. ISBN 0521412307.
  4. ↑ Naidu, Prabhakar S. (November 2003). Modern Digital Signal Processing: An Introduction. Pangbourne RG8 8UT, UK: Alpha Science Intl Ltd. pp. 29–31. ISBN 1842651331.

Further reading

  • Steinmetz, Charles Proteus (2003-02-20). Lectures on Electrical Engineering. 3 (1 ed.). Mineola,NY: Dover Publications. ISBN 0486495388.
  • Steinmetz, Charles Proteus (1917). Theory and Calculations of Electrical Apparatus 6 (1 ed.). New York: McGraw-Hill Book Company. B004G3ZGTM.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.