Newag Dragon

Newag Dragon
Manufacturer Newag
Number built 15
Specifications
Maximum speed 140 km/h (87 mph)
Weight 119 t (117 long tons; 131 short tons)
Power output 5,004 kW (6,710 hp)

The Newag Dragon is a Polish made six-axle electric locomotive, designed for freight trains up to 4500 tons. The locomotive is built by Newag company, between 2009-2016 in its Gliwice plant, since 2017 in Nowy Sącz plant. By April 2017, 15 units have been built and delivered to 4 different railway operators in Poland.

History

The prototype on railway tracks at the Trako Trade Fair in 2009.

Origin

The main railway freight locomotive in Poland is the six-axle ET22 electric locomotive, which has had over 1000 units built between 1969-1989 in Pafawag company in Wrocław.[1] In later years, the company, which is the main producer of electric locomotives, ceased production of heavy freight locomotives, building only four-axle passenger electric locomotives of the EP09 type(up to 1997), dual-mode EU43 and EU11 locomotive. These two latter, which have been built for the railway between 1997 and 2002 after the acquisition of Pafawag by Adtranz, did not make it to Poland due to financial problems when ordering the locomotives. In 2002, Adtranz-Pafawag was acquired by Bombardier, which decided not to produce an electric locomotive in Wrocław. Since 2002, for several years in Poland there had been no electric locomotives produced.[2]

Prototype production

In September 2006, an agreement was signed with the Ministry of Science and Higher Education for funding the project to build a new locomotive. It was decided to produce a train dedicated for heavy freight, and in addition, the company wanted to allow operation on a wider variety of tracks therefore the locomotive was to be six-axle.[3] The project for the locomotive was prepared in cooperation with the EC manufacturer and the Institute of Electrical Engineering. The traction engines are designed by the Research and Development Centre of Electrical Machines Komel[4] and built by the Department of Electrical Machines Emit.[5]

Presentations and tests

E6ACT-008 produced for Lotos Kolej at the InnoTrans Trade Fair, 2014

On 13 January to 30 December 2011 the supervised operation prototype unit, was led by STK, PKP Cargo, Pol-Miedz Trans and Lotos Kolej, under which E6ACT-001 altogether has driven up to 77 866 km, and the maximum train weight was 4 021 t. In October, the locomotive was re-launched at Trako Trade Fair in Gdańsk. On the 23 December the Railway Transport Office issued a perpetual license for the service of the locomotive. In February 2012, a promotional operation was took by DB Schenker Rail Poland.[6] In September 2014 at the InnoTrans Trade Fair presented the locomotive belonging to the Lotos Kolej with the E6ACT-008 series.[7]

Deliveries

State Operator Type Side numbers Count
Poland Industrial Division E6ACT 001 ÷ 004 4
Lotos Kolej 005 ÷ 009 5
Freightliner PL E6ACTd 101 ÷ 105 5
Budokrusz 106 1

d - subtype designates a dual-power option (auxiliary 540 kilowatt diesel engine primarily for shunting)

Construction

Available versions

The locomotives are available in versions powered by:

  • DC voltage of 3 kV (type E6DCU originally E6ACT).
  • AC voltage of 15 or 25 kV (type E6ACU).
  • DC voltage of 3 kV and AC voltage of 15 or 25 kV (type E6MSU).
  • Diesel (version with limited power including continuous traction power with the maximum speed of the load). However, the company produced the locomotives powered by DC with the E6ACT series.[8]

The manufacturer also provides 2 options for improvement:

  • Max load - increasing the traction force to 450 kN.
  • Dual power - with an additional combustion engine.[9]

E6ACT

The engine compartment. To the left are motor fan ducts, to the right is pneumatic gear rack.

Power Supply

The E6ACT locomotive is designed to operate at a supply voltage of 3 kV DC. The locomotive traction has IGBT technology. The first unit of the locomotive is powered by 6 STX500-4A electric engines with a capacity of 834 kW each, which is powered by traction converters developed by the Institute of Electrical Engineering. The gear axle SET 553 is supplied by Voith. The locomotives are equipped with disc brakes.[10]

Possibilities

The E6ACT/E6ACU locomotive has a continuous power of 5,004 MW and a starting tractive effort of 375 kN, maing it able to pull 4,000 tonnes of cargo - or 4,500 with Max Load option.[11]

References

  1. ↑ "The first Polish locomotive in nineteen years". Inforail. Retrieved 16 December 2014.
  2. ↑ "The Dragon Locomotive by Newag" (PDF). Bambus. Archived from the original (PDF) on 20 April 2014. Retrieved 16 December 2014.
  3. ↑ "The Birth of the Newag Dragon". Kurier Kolejowy. Retrieved 16 December 2014.
  4. ↑ "KOMEL Katowice Locomotive by Newag". KOMEL. Retrieved 16 December 2014.
  5. ↑ "Poland begins a new journey in producing locomotives". Wyborcza. Retrieved 16 December 2014.
  6. ↑ "The presentation of the new locomotive". Rynek Kolejowy. Retrieved 16 December 2014.
  7. ↑ "Three work stage on the engine" (PDF). Cantoni Group. Retrieved 16 December 2014.
  8. ↑ "The progress in producing the types". Railvolution. Retrieved 16 December 2014.
  9. ↑ "Trains and platforms". Kurier Kolejowy. Retrieved 16 December 2014.
  10. ↑ "Engineering Specification of the Newag Dragon Series". Kurier Kolehojy. Retrieved 16 December 2014.
  11. ↑ "Successful tests of the train". Inforail. Retrieved 16 December 2014.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.