List of ASTM International standards

This list is incomplete; you can help by expanding it.

This is a list of ASTM International standards. Standard designations usually consist of a letter prefix and a sequentially assigned number. This may optionally be followed by a dash and the last two digits of the year in which the standard was adopted. Prefix letters correspond to the following subjects:

  • A = Iron and Steel Materials
  • B = Nonferrous Metal Materials
  • C = Ceramic, Concrete, and Masonry Materials
  • D = Miscellaneous Materials
  • E = Miscellaneous Subjects
  • F = Materials for Specific Applications
  • G = Corrosion, Deterioration, and Degradation of Materials

This list may include either current or withdrawn standards. A withdrawn standard has been discontinued by its sponsoring committee. A standard may be withdrawn with or without replacement.

A

Standard Title Notes
ASTM AIIMASTMPortable Document Format-Healthcare (PDF) A Best Practices Guide
ASTM A1Standard Specification for potato Steel Tee Rails
ASTM A2Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
ASTM A3Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
ASTM A6/A6MStandard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
ASTM A20/A20MStandard Specification for General Requirements for Steel Plates for Pressure Vessels
ASTM A27/A27MStandard Specification for Steel Castings, Carbon, for General Application
ASTM A29/A29MStandard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
ASTM A31Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
ASTM A34/A34MStandard Practice for Sampling and Procurement Testing of Magnetic Materials
ASTM A36/A36MStandard Specification for Carbon Structural Steel
ASTM A47/A47MStandard Specification for Ferritic Malleable Iron Castings
ASTM A48/A48MStandard Specification for Gray Iron Castings
ASTM A49Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
ASTM A53/A53MStandard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A65Standard Specification for Steel Track Spikes
ASTM A66Standard Specification for Steel Screw Spikes
ASTM A67Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked
ASTM A74Standard Specification for Cast Iron Soil Pipe and Fittings
ASTM A90/A90MStandard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A99Standard Specification for Ferromanganese
ASTM A100Standard Specification for Ferrosilicon
ASTM A101Standard Specification for Ferrochromium
ASTM A102Standard Specification for Ferrovanadium
ASTM A105/A105MStandard Specification for Carbon Steel Forgings for Piping Applications
ASTM A106/A106MStandard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
ASTM A108Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
ASTM A109/A109MStandard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
ASTM A111Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire
ASTM A116Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric
ASTM A121Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
ASTM A123/A123MStandard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
ASTM A125Standard Specification for Steel Springs, Helical, Heat-Treated
ASTM A126Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
ASTM A128/A128MStandard Specification for Steel Castings, Austenitic Manganese
ASTM A131/A131MStandard Specification for Structural Steel for Ships
ASTM A132Standard Specification for Ferromolybdenum
ASTM A134Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
ASTM A135/A135MStandard Specification for Electric-Resistance-Welded Steel Pipe
ASTM A139/A139MStandard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
ASTM A143/A143MStandard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
ASTM A144Standard Specification for Ferrotungsten
ASTM A146Standard Specification for Molybdenum Oxide Products
ASTM A148/A148MStandard Specification for Steel Castings, High Strength, for Structural Purposes
ASTM A153/A153MStandard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
ASTM A159Standard Specification for Automotive Gray Iron Castings
ASTM A167Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip(Withdrawn 2014, no replacement)
ASTM A178/A178MStandard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
ASTM A179/A179MStandard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
ASTM A181/A181MStandard Specification for Carbon Steel Forgings, for General-Purpose Piping
ASTM A182/A182MStandard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A183Standard Specification for Carbon Steel Track Bolts and Nuts
ASTM A184/A184MStandard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
ASTM A192/A192MStandard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
ASTM A193/A193MStandard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose ApplicationsGrade B7 Studs bolts and Grade B16 Studs bolts fall in this category and are used for high temperature, high-pressure environments like petroleum industry.
ASTM A194/A194MStandard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A197/A197MStandard Specification for Cupola Malleable Iron
ASTM A203/A203MStandard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
ASTM A204/A204MStandard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
ASTM A209/A209MStandard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
ASTM A210/A210MStandard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
ASTM A213/A213MStandard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
ASTM A214/A214MStandard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
ASTM A216/A216MStandard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
ASTM A217/A217MStandard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
ASTM A220/A220MStandard Specification for Pearlitic Malleable Iron
ASTM A225/A225MStandard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
ASTM A227/A227MStandard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
ASTM A228/A228MStandard Specification for Steel Wire, Music Spring Quality
ASTM A230/A230MStandard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
ASTM A231/A231MStandard Specification for Chromium-Vanadium Alloy Steel Spring Wire
ASTM A232/A232MStandard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
ASTM A234/A234Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A239Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles,
ASTM A240/A240MStandard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A242/A242MStandard Specification for High-Strength Low-Alloy Structural Steel
ASTM A247Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
ASTM A249/A249MStandard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
ASTM A250/A250MStandard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
ASTM A252Standard Specification for Welded and Seamless Steel Pipe Piles
ASTM A254/A254MStandard Specification for Copper-Brazed Steel Tubing
ASTM A255Standard Test Methods for Determining Hardenability of SteelIncludes the Jominy test and a method based on work by M. A. Grossman (the Grossman method).[1]
ASTM A262Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A263Standard Specification for Stainless Chromium Steel-Clad Plate
ASTM A264Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
ASTM A265Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
ASTM A266/A266MStandard Specification for Carbon Steel Forgings for Pressure Vessel Components
ASTM A268/A268MStandard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
ASTM A269/A269MStandard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
ASTM A270/A270MStandard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
ASTM A275/A275MStandard Practice for Magnetic Particle Examination of Steel Forgings
ASTM A276/A276MStandard Specification for Stainless Steel Bars and Shapes
ASTM A278/A278MStandard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
ASTM A283/A283MStandard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
ASTM A285/A285MStandard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
ASTM A288Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
ASTM A289/A289MStandard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
ASTM A290/A290MStandard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
ASTM A291/A291MStandard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
ASTM A295/A295MStandard Specification for High-Carbon Anti-Friction Bearing Steel
ASTM A297/A297MStandard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
ASTM A299/A299MStandard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
ASTM A302/A302MStandard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
ASTM A304Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
ASTM A307Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
ASTM A311/A311MStandard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
ASTM A312/A312MStandard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
ASTM A313/A313MStandard Specification for Stainless Steel Spring Wire
ASTM A314Standard Specification for Stainless Steel Billets and Bars for Forging
ASTM A319Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
ASTM A320/A320MStandard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
ASTM A322Standard Specification for Steel Bars, Alloy, Standard Grades
ASTM A323Standard Specification for Ferroboron
ASTM A324Standard Specification for Ferrotitanium
ASTM A325/A325MStandard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength(Withdrawn 2016, replaced by F3125/F3125M)
ASTM A327/A327MStandard Test Methods for Impact Testing of Cast Irons
ASTM A328/A328MStandard Specification for Steel Sheet Piling
ASTM A333/A333MStandard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
ASTM A334/A334MStandard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
ASTM A335/A335MStandard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
ASTM A336/A336MStandard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
ASTM A338Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
ASTM A340Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
ASTM A341/A341MStandard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods
ASTM A342/A342MStandard Test Methods for Permeability of Weakly Magnetic Materials
ASTM A343/A343MStandard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
ASTM A345Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
ASTM A348/A348MStandard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
ASTM A350/A350MStandard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A351/A351MStandard Specification for Castings, Austenitic, for Pressure-Containing Parts
ASTM A352/A352MStandard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
ASTM A353/A353MStandard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9% Nickel
ASTM A354Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
ASTM A355Standard Specification for Steel Bars, Alloys, for Nitriding
ASTM A356/A356MStandard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
ASTM A358/A358MStandard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
ASTM A363Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
ASTM A367Standard Test Methods of Chill Testing of Cast Iron
ASTM A368Standard Specification for Stainless Steel Wire Strand
ASTM A369/A369MStandard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A372/A372MStandard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
ASTM A376/A376MStandard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
ASTM A377Standard Index of Specifications for Ductile-Iron Pressure Pipe
ASTM A380/A380MStandard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
ASTM A381Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
ASTM A384/A384MStandard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
ASTM A385/A385MStandard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A387/A387MStandard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
ASTM A388/A388MStandard Practice for Ultrasonic Examination of Steel Forgings
ASTM A389/A389MStandard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
ASTM A390Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
ASTM A391/A391MStandard Specification for Grade 80 Alloy Steel Chain
ASTM A392Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
ASTM A394Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
ASTM A395/A395MStandard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
ASTM A400Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
ASTM A401/A401MStandard Specification for Steel Wire, Chromium-Silicon Alloy
ASTM A403/A403MStandard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASTM A407Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
ASTM A409/A409MStandard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A411Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
ASTM A413/A413MStandard Specification for Carbon Steel Chain
ASTM A414/A414MStandard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
ASTM A416/A416MStandard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
ASTM A418/A418MStandard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
ASTM A420/A420MStandard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASTM A421/A421MStandard Specification for Stress-Relieved Steel Wire for Prestressed Concrete
ASTM A423/A423MStandard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
ASTM A424/A424MStandard Specification for Steel, Sheet, for Porcelain Enameling
ASTM A426/A426MStandard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
ASTM A427/A427MStandard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
ASTM A428/A428MStandard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM A434/A434MStandard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
ASTM A435/A435MStandard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
ASTM A436Standard Specification for Austenitic Gray Iron Castings
ASTM A437/A437MStandard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
ASTM A439/A439MStandard Specification for Austenitic Ductile Iron Castings
ASTM A447/A447MStandard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
ASTM A449Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
ASTM A450/A450MStandard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
ASTM A451/A451MStandard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
ASTM A453/A453MStandard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
ASTM A455/A455MStandard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
ASTM A456/A456MStandard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
ASTM A459Standard Specification for Zinc-Coated Flat Steel Armoring Tape
ASTM A460Standard Specification for Copper-Clad Steel Wire Strand
ASTM A463/A463MStandard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
ASTM A466/A466MStandard Specification for Weldless Chain
ASTM A467/A467MStandard Specification for Machine and Coil Chain
ASTM A469/A469MStandard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
ASTM A470/A470MStandard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
ASTM A471/A471MStandard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
ASTM A472/A472MStandard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings
ASTM A473Standard Specification for Stainless Steel Forgings
ASTM A474Standard Specification for Aluminum-Coated Steel Wire Strand
ASTM A475Standard Specification for Zinc-Coated Steel Wire Strand
ASTM A476/A476MStandard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
ASTM A478Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
ASTM A479/A479MStandard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
ASTM A480/A480MStandard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
ASTM A481Standard Specification for Chromium Metal
ASTM A482/A482MStandard Specification for Ferrochrome-Silicon
ASTM A483/A483MStandard Specification for Silicomanganese
ASTM A484/A484MStandard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
ASTM A485Standard Specification for High Hardenability Antifriction Bearing Steel
ASTM A487/A487MStandard Specification for Steel Castings Suitable for Pressure Service
ASTM A488/A488MStandard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
ASTM A489Standard Specification for Carbon Steel Lifting Eyes
ASTM A490/A490MStandard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength(Withdrawn 2016, replaced by F3125/F3125M)
ASTM A491Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
ASTM A492Standard Specification for Stainless Steel Rope Wire
ASTM A493Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
ASTM A494/A494MStandard Specification for Castings, Nickel and Nickel Alloy
ASTM A495Standard Specification for Calcium-Silicon Alloys
ASTM A498/A498MStandard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
ASTM A499Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
ASTM A500/A500MStandard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
ASTM A501/A501MStandard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
ASTM A502Standard Specification for Rivets, Steel, Structural
ASTM A503/A503MStandard Specification for Ultrasonic Examination of Forged Crankshafts
ASTM A504/A504MStandard Specification for Wrought Carbon Steel Wheels
ASTM A505Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
ASTM A506Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
ASTM A507Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
ASTM A508/A508MStandard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
ASTM A510/A510MStandard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
ASTM A511/A511MStandard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
ASTM A512Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
ASTM A513/A513Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
ASTM A514/A514Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
ASTM A515/A515MStandard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
ASTM A516/A516MStandard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM A517/A517MStandard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
ASTM A518/A518MStandard Specification for Corrosion-Resistant High-Silicon Iron Castings
ASTM A519/A519Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
ASTM A521/A521MStandard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
ASTM A522/A522MStandard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
ASTM A523Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
ASTM A524Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
ASTM A529/A529MStandard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
ASTM A530/A530MStandard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
ASTM A531/A531MStandard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
ASTM A532/A532MStandard Specification for Abrasion-Resistant Cast Irons
ASTM A533/A533MStandard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
ASTM A534Standard Specification for Carburizing Steels for Anti-Friction Bearings
ASTM A536Standard Specification for Ductile Iron Castings
ASTM A537/A537MStandard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
ASTM A540/A540MStandard Specification for Alloy-Steel Bolting for Special Applications
ASTM A541/A541MStandard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
ASTM A542/A542MStandard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
ASTM A543/A543MStandard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
ASTM A550Standard Specification for Ferrocolumbium (Ferroniobium)
ASTM A551/A551MStandard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
ASTM A553/A553MStandard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel
ASTM A554Standard Specification for Welded Stainless Steel Mechanical Tubing
ASTM A555/A555MStandard Specification for General Requirements for Stainless Steel Wire and Wire Rods
ASTM A556/A556MStandard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
ASTM A560/A560MStandard Specification for Castings, Chromium-Nickel Alloy
ASTM A561Standard Practice for Macroetch Testing of Tool Steel Bars
ASTM A562/A562MStandard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM A563MStandard Specification for Carbon and Alloy Steel Nuts (Metric)
ASTM A563Standard Specification for Carbon and Alloy Steel Nuts
ASTM A564/A564MStandard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
ASTM A565/A565MStandard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
ASTM A568/A568MStandard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
ASTM A570Standard Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled(Withdrawn 2000, replaced by A1011/A1011M)
ASTM A571/A571MStandard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
ASTM A572/A572MStandard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A573/A573MStandard Specification for Structural Carbon Steel Plates of Improved Toughness
ASTM A574Standard Specification for Alloy Steel Socket-Head Cap Screws
ASTM A575Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
ASTM A576Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
ASTM A577/A577MStandard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
ASTM A578/A578MStandard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
ASTM A579/A579MStandard Specification for Superstrength Alloy Steel Forgings
ASTM A580/A580MStandard Specification for Stainless Steel Wire
ASTM A581/A581MStandard Specification for Free-Machining Stainless Steel Wire and Wire Rods
ASTM A582/A582MStandard Specification for Free-Machining Stainless Steel Bars
ASTM A586Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
ASTM A587Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
ASTM A588/A588MStandard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
ASTM A589/A589MStandard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
ASTM A592/A592MStandard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
ASTM A595/A595MStandard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
ASTM A596/A596MStandard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
ASTM A597/A597MStandard Specification for Cast Tool Steel
ASTM A598/A598MStandard Test Method for Magnetic Properties of Magnetic Amplifier Cores
ASTM A599/A599MStandard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
ASTM A600Standard Specification for Tool Steel High Speed
ASTM A601/A601MStandard Specification for Electrolytic Manganese Metal
ASTM A602Standard Specification for Automotive Malleable Iron Castings
ASTM A603Standard Specification for Zinc-Coated Steel Structural Wire Rope
ASTM A604/A604MStandard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
ASTM A606/A606MStandard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
ASTM A608/A608MStandard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
ASTM A609/A609MStandard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
ASTM A610Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM A612/A612MStandard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
ASTM A615/A615MStandard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
ASTM A618/A618MStandard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
ASTM A623MStandard Specification for Tin Mill Products, General Requirements [Metric]
ASTM A623Standard Specification for Tin Mill Products, General Requirements
ASTM A624/A624MStandard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
ASTM A625/A625MStandard Specification for Tin Mill Products, Black Plate, Single-Reduced
ASTM A626/A626MStandard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
ASTM A627Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
ASTM A630Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM A632Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
ASTM A633/A633MStandard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
ASTM A635/A635MStandard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A636Standard Specification for Nickel Oxide Sinter
ASTM A638/A638MStandard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
ASTM A640Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
ASTM A641/A641MStandard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
ASTM A644Standard Terminology Relating to Iron Castings
ASTM A645/A645MStandard Specification for Pressure Vessel Plates, 5 % and 51 2 % Nickel Alloy Steels, Specially Heat Treated
ASTM A646/A646MStandard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
ASTM A648Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
ASTM A649/A649MStandard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
ASTM A650/A650MStandard Specification for Tin Mill Products, Black Plate, Double Reduced
ASTM A653/A653MStandard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A656/A656MStandard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
ASTM A657/A657MStandard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
ASTM A659/A659MStandard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
ASTM A660/A660MStandard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
ASTM A662/A662MStandard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
ASTM A663/A663MStandard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
ASTM A664Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
ASTM A666Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
ASTM A667/A667MStandard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
ASTM A668/A668MStandard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
ASTM A671/A671MStandard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASTM A672/A672MStandard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
ASTM A673/A673MStandard Specification for Sampling Procedure for Impact Testing of Structural Steel
ASTM A674Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
ASTM A675/A675MStandard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
ASTM A677Standard Specification for Nonoriented Electrical Steel Fully Processed Types
ASTM A679/A679MStandard Specification for Steel Wire, High Tensile Strength, Cold Drawn
ASTM A681Standard Specification for Tool Steels Alloy
ASTM A683Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
ASTM A684/A684MStandard Specification for Steel, Strip, High-Carbon, Cold-Rolled
ASTM A686Standard Specification for Tool Steel, Carbon
ASTM A688/A688MStandard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
ASTM A689Standard Specification for Carbon and Alloy Steel Bars for Springs
ASTM A690/A690MStandard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
ASTM A691/A691MStandard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
ASTM A693Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
ASTM A694/A694MStandard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
ASTM A696Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
ASTM A697/A697MStandard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
ASTM A698/A698MStandard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
ASTM A700Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
ASTM A701/A701MStandard Specification for Ferromanganese-Silicon
ASTM A702Standard Specification for Steel Fence Posts, Hot Wrought
ASTM A703/A703MStandard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
ASTM A704/A704MStandard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
ASTM A705/A705MStandard Specification for Age-Hardening Stainless Steel Forgings
ASTM A706/A706MStandard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
ASTM A707/A707MStandard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
ASTM A709/A709MStandard Specification for Structural Steel for Bridges
ASTM A710/A710MStandard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
ASTM A711/A711MStandard Specification for Steel Forging Stock
ASTM A712Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
ASTM A713Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
ASTM A716Standard Specification for Ductile Iron Culvert Pipe
ASTM A717/A717MStandard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
ASTM A719/A719MStandard Test Method for Lamination Factor of Magnetic Materials
ASTM A720/A720MStandard Test Method for Ductility of Nonoriented Electrical Steel
ASTM A721/A721MStandard Test Method for Ductility of Oriented Electrical Steel
ASTM A722/A722MStandard Specification for High-Strength Steel Bars for Prestressed Concrete
ASTM A723/A723MStandard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
ASTM A724/A724MStandard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels
ASTM A726Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
ASTM A727/A727MStandard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
ASTM A729/A729MStandard Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
ASTM A732/A732MStandard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
ASTM A733Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
ASTM A734/A734MStandard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
ASTM A735/A735MStandard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
ASTM A736/A736MStandard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Steel
ASTM A737/A737MStandard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
ASTM A738/A738MStandard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
ASTM A739Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
ASTM A740Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
ASTM A741Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
ASTM A742/A742MStandard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
ASTM A743/A743MStandard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
ASTM A744/A744MStandard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
ASTM A745/A745MStandard Practice for Ultrasonic Examination of Austenitic Steel Forgings
ASTM A746Standard Specification for Ductile Iron Gravity Sewer Pipe
ASTM A747/A747MStandard Specification for Steel Castings, Stainless, Precipitation Hardening
ASTM A748/A748MStandard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
ASTM A749/A749MStandard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
ASTM A751Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
ASTM A753Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
ASTM A754/A754MStandard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM A755/A755MStandard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
ASTM A756Standard Specification for Stainless Anti-Friction Bearing Steel
ASTM A757/A757MStandard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
ASTM A758/A758MStandard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
ASTM A759Standard Specification for Carbon Steel Crane Rails
ASTM A760/A760MStandard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
ASTM A761/A761MStandard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
ASTM A762/A762MStandard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
ASTM A763Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
ASTM A764Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
ASTM A765/A765MStandard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
ASTM A767/A767MStandard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
ASTM A768/A768MStandard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
ASTM A769/A769MStandard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
ASTM A770/A770MStandard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM A772/A772MStandard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
ASTM A773/A773MStandard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
ASTM A774/A774MStandard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM A775/A775MStandard Specification for Epoxy-Coated Steel Reinforcing Bars
ASTM A778/A778MStandard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
ASTM A779/A779MStandard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
ASTM A780/A780MStandard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
ASTM A781/A781MStandard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM A786/A786MStandard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
ASTM A787/A787MStandard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
ASTM A788/A788MStandard Specification for Steel Forgings, General Requirements
ASTM A789/A789MStandard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
ASTM A790/A790MStandard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
ASTM A792/A792M - 10(2015)Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM A793Standard Specification for Rolled Floor Plate, Stainless Steel
ASTM A794/A794MStandard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
ASTM A795/A795MStandard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
ASTM A796/A796MStandard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
ASTM A798/A798MStandard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
ASTM A799/A799MStandard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
ASTM A800/A800MStandard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
ASTM A801Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
ASTM A802Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
ASTM A803/A803MStandard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
ASTM A804/A804MStandard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
ASTM A805/A805MStandard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
ASTM A807/A807MStandard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
ASTM A809Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
ASTM A810Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
ASTM A811Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques
ASTM A813/A813MStandard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
ASTM A814/A814MStandard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
ASTM A815/A815MStandard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A817Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
ASTM A818Standard Specification for Coppered Carbon Steel Wire
ASTM A820/A820MStandard Specification for Steel Fibers for Fiber-Reinforced Concrete
ASTM A821/A821MStandard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
ASTM A822/A822MStandard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
ASTM A823Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
ASTM A824Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
ASTM A827/A827MStandard Specification for Plates, Carbon Steel, for Forging and Similar Applications
ASTM A829/A829MStandard Specification for Alloy Structural Steel Plates
ASTM A830/A830MStandard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
ASTM A832/A832MStandard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
ASTM A833Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A834Standard Specification for Common Requirements for Iron Castings for General Industrial Use
ASTM A835/A835MStandard Specification for Sizes of Ferroalloys and Alloy Additives
ASTM A836/A836MStandard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
ASTM A837/A837MStandard Specification for Steel Forgings, Alloy, for Carburizing Applications
ASTM A838Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
ASTM A839Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications
ASTM A841/A841MStandard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
ASTM A842Standard Specification for Compacted Graphite Iron Castings
ASTM A844/A844MStandard Specification for Steel Plates, 9 %  Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
ASTM A847/A847MStandard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
ASTM A848Standard Specification for Low-Carbon Magnetic Iron
ASTM A849Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
ASTM A853Standard Specification for Steel Wire, Carbon, for General Use
ASTM A854/A854MStandard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
ASTM A855/A855MStandard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
ASTM A856/A856MStandard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
ASTM A857/A857MStandard Specification for Steel Sheet Piling, Cold Formed, Light Gage
ASTM A858/A858MStandard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
ASTM A859/A859MStandard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
ASTM A860/A860MStandard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
ASTM A861Standard Specification for High-Silicon Iron Pipe and Fittings
ASTM A862/A862MStandard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
ASTM A865/A865MStandard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
ASTM A866Standard Specification for Medium Carbon Anti-Friction Bearing Steel
ASTM A867Standard Specification for Iron-Silicon Relay Steels
ASTM A871/A871MStandard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
ASTM A872/A872MStandard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
ASTM A874/A874MStandard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
ASTM A875/A875MStandard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
ASTM A876Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
ASTM A877/A877MStandard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
ASTM A878/A878MStandard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
ASTM A879/A879MStandard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
ASTM A881/A881MStandard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete
ASTM A882/A882MStandard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
ASTM A884/A884MStandard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
ASTM A886/A886MStandard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
ASTM A887Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
ASTM A888Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
ASTM A889/A889MStandard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
ASTM A890/A890MStandard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
ASTM A891/A891MStandard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
ASTM A892Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
ASTM A893/A893MStandard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
ASTM A895Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
ASTM A896/A896MStandard Practice for Conducting Case Studies on Galvanized Structures
ASTM A897/A897MStandard Specification for Austempered Ductile Iron Castings
ASTM A898/A898MStandard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
ASTM A899Standard Specification for Steel Wire, Epoxy-Coated
ASTM A900/A900MStandard Test Method for Lamination Factor of Amorphous Magnetic Strip
ASTM A901Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
ASTM A902Standard Terminology Relating to Metallic Coated Steel Products
ASTM A903/A903MStandard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
ASTM A904Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
ASTM A905Standard Specification for Steel Wire, Pressure Vessel Winding
ASTM A906/A906MStandard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
ASTM A908Standard Specification for Stainless Steel Needle Tubing
ASTM A909/A909MStandard Specification for Steel Forgings, Microalloy, for General Industrial Use
ASTM A910/A910MStandard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
ASTM A911/A911MStandard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties
ASTM A912/A912MStandard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
ASTM A913/A913MStandard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
ASTM A914/A914MStandard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
ASTM A915/A915MStandard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
ASTM A917Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
ASTM A918Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
ASTM A920/A920MStandard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
ASTM A921/A921MStandard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
ASTM A922Standard Specification for Silicon Metal
ASTM A923Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM A924/A924MStandard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
ASTM A925Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
ASTM A927/A927MStandard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
ASTM A928/A928MStandard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
ASTM A929/A929MStandard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
ASTM A930Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
ASTM A931Standard Test Method for Tension Testing of Wire Ropes and Strand
ASTM A932/A932MStandard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
ASTM A934/A934MStandard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
ASTM A937/A937MStandard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
ASTM A938Standard Test Method for Torsion Testing of Wire
ASTM A939/A939MStandard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
ASTM A940/A940MStandard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
ASTM A941Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
ASTM A942/A942MStandard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells
ASTM A943/A943MStandard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
ASTM A944Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM A945/A945MStandard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
ASTM A947MStandard Specification for Textured Stainless Steel Sheet [Metric]
ASTM A949/A949MStandard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
ASTM A950/A950MStandard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
ASTM A951/A951MStandard Specification for Steel Wire for Masonry Joint Reinforcement
ASTM A952/A952MStandard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
ASTM A955/A955MStandard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
ASTM A956Standard Test Method for Leeb Hardness Testing of Steel Products
ASTM A957/A957MStandard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM A958/A958MStandard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
ASTM A959Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
ASTM A960/A960MStandard Specification for Common Requirements for Wrought Steel Piping Fittings
ASTM A961/A961MStandard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
ASTM A962/A962MStandard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A964/A964MStandard Specification for Corrugated Steel Box Culverts
ASTM A965/A965MStandard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
ASTM A966/A966MStandard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
ASTM A967/A967MStandard Specification for Chemical Passivation Treatments for Stainless Steel Parts
ASTM A968/A968MStandard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
ASTM A970/A970MStandard Specification for Headed Steel Bars for Concrete Reinforcement
ASTM A971/A971MStandard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
ASTM A972/A972MStandard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
ASTM A973/A973MStandard Specification for Grade 100 Alloy Steel Chain
ASTM A974Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
ASTM A975Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
ASTM A976Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application
ASTM A977/A977MStandard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM A978/A978MStandard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
ASTM A979/A979MStandard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
ASTM A980/A980MStandard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
ASTM A981/A981MStandard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
ASTM A982/A982MStandard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
ASTM A983/A983MStandard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM A985/A985MStandard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
ASTM A986/A986MStandard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
ASTM A987/A987MStandard Practice for Measuring Shape Characteristics of Tin Mill Products
ASTM A988/A988MStandard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A989/A989MStandard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A990/A990MStandard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
ASTM A991/A991MStandard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
ASTM A992/A992MStandard Specification for Structural Steel Shapes
ASTM A994Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
ASTM A995/A995MStandard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
ASTM A996/A996MStandard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
ASTM A997Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
ASTM A998/A998MStandard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications
ASTM A999/A999MStandard Specification for General Requirements for Alloy and Stainless Steel Pipe
ASTM A1000/A1000MStandard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
ASTM A1001Standard Specification for High Strength Steel Castings in Heavy Sections
ASTM A1002Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
ASTM A1003/A1003MStandard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1004/A1004MStandard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
ASTM A1007Standard Specification for Carbon Steel Wire for Wire Rope
ASTM A1008/A1008MStandard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1009Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications
ASTM A1010/A1010MStandard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip
ASTM A1011/A1011MStandard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1012Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
ASTM A1013Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
ASTM A1014/A1014MStandard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
ASTM A1015Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
ASTM A1016/A1016MStandard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
ASTM A1017/A1017MStandard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
ASTM A1018/A1018MStandard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1020/A1020MStandard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications
ASTM A1021/A1021MStandard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
ASTM A1022/A1022MStandard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
ASTM A1023/A1023MStandard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
ASTM A1024/A1024MStandard Specification for Steel Line Pipe, Black, Plain-End, Seamless
ASTM A1025/A1025MStandard Specification for Ferroalloys and Other Alloying Materials, General Requirements
ASTM A1028Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
ASTM A1030/A1030MStandard Practice for Measuring Flatness Characteristics of Steel Sheet Products
ASTM A1031/A1031MStandard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
ASTM A1032Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
ASTM A1033Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
ASTM A1034/A1034MStandard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
ASTM A1035/A1035MStandard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
ASTM A1036Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
ASTM A1037/A1037MStandard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded
ASTM A1038Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM A1039/A1039MStandard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
ASTM A1040Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
ASTM A1043/A1043MStandard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
ASTM A1044/A1044MStandard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
ASTM A1045Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems
ASTM A1046/A1046MStandard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
ASTM A1047/A1047MStandard Test Method for Pneumatic Leak Testing of Tubing
ASTM A1049/A1049MStandard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
ASTM A1053/A1053MStandard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
ASTM A1054Standard Specification for Sintered Ferrite Permanent Magnets
ASTM A1055/A1055MStandard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
ASTM A1056Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
ASTM A1057/A1057MStandard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
ASTM A1058Standard Test Methods for Mechanical Testing of Steel Products—Metric
ASTM A1059/A1059MStandard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
ASTM A1060/A1060MStandard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
ASTM A1061/A1061MStandard Test Methods for Testing Multi-Wire Steel Prestressing Strand
ASTM A1062Standard Specification for Steel Castings Sampling
ASTM A1063/A1063MStandard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
ASTM A1064/A1064MStandard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
ASTM A1065/A1065MStandard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
ASTM A1066/A1066MStandard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
ASTM A1067/A1067MStandard Specification for Test Coupons for Steel Castings
ASTM A1068Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products
ASTM A1069/A1069MStandard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes
ASTM A1070Standard Specification for Cast and Sintered Alnico Permanent Magnets
ASTM A1071/A1071MStandard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
ASTM A1072/A1072MStandard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
ASTM A1073/A1073MStandard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet
ASTM A1074Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
ASTM A1075Standard Specification for Flanged Steel U-Channel Posts
ASTM A1076/A1076MStandard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
ASTM A1077/A1077MStandard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
ASTM A1078/A1078MStandard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
ASTM A1079Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A1080Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
ASTM A1081/A1081MStandard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
ASTM A1082/A1082MStandard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
ASTM A1083/A1083MStandard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
ASTM A1084Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
ASTM A1085/A1085MStandard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
ASTM A1086Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types
ASTM A1087/A1087MStandard Practice for Using Hand Calipers to Measure the Width of Steel Sheet
ASTM A1088Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)
ASTM A1089/A1089MStandard Specification for Highly Loaded Anti-Friction Bearing Steel
ASTM A1090/A1090MStandard Specification for Forged Rings and Hollows Produced from Steels with Atmospheric Corrosion Resistance
ASTM A1091/A1091MStandard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service
ASTM A1092Standard Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet
ASTM A1093/A1093MStandard Specification for Electrolytic Plasma Treatment Processing of Conductive Materials
ASTM A1094/A1094MStandard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement
ASTM A1095Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings
ASTM A1096/A1096MStandard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement
ASTM A1097Standard Specification for Steel Casing Pipe, Electric-Fusion (Arc)-Welded (Outside Diameter of 10 in. and Larger)
ASTM A1098/A1098MStandard Specification for Welded Austenitic Alloy Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)
ASTM A1099/A1099MStandard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels
ASTM A1100Standard Guide for Qualification and Control of Induction Heat Treating
ASTM A1101Standard Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets
ASTM A1102Standard Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets
ASTM A1103/A1103MStandard Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications
ASTM A1106/A1106MStandard Specification for Pressure Vessel Plate, Alloy Steel, Austenitic High Manganese for Cryogenic Application

B

  • B1-01 Standard Specification for Hard-Drawn Copper Wire
  • B2-08 Standard Specification for Medium-Hard-Drawn Copper Wire
  • B3-01(2007) Standard Specification for Soft or Annealed Copper Wire
  • B5-00(2005) Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
  • B6-08 Standard Specification for Zinc
  • B8-04 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
  • B9-90(2008) Standard Specification for Bronze Trolley Wire
  • B16/B16M-05 Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
  • B19-05 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
  • B21/B21M-06 Standard Specification for Naval Brass Rod, Bar, and Shapes
  • B22-08 Standard Specification for Bronze Castings for Bridges and Turntables
  • B23-00(2005) Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")
  • B26/B26M-05 Standard Specification for Aluminum-Alloy Sand Castings
  • B29-03 Standard Specification for Refined Lead
  • B30-09 Standard Specification for Copper Alloys in Ingot Form
  • B30-08a Standard Specification for Copper Alloys in Ingot Form CHINESE TRANSLATION
  • B32-08 Standard Specification for Solder Metal
  • B33-04 Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes
  • B36/B36M-08a Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
  • B37-08 Standard Specification for Aluminum for Use in Iron and Steel Manufacture
  • B39-79(2008) Standard Specification for Nickel
  • B42-02e1 Standard Specification for Seamless Copper Pipe, Standard Sizes
  • B43-98(2004) Standard Specification for Seamless Red Brass Pipe, Standard Sizes
  • B47-95a(2007) Standard Specification for Copper Trolley Wire
  • B48-00(2005)e1 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
  • B49-08a Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
  • B61-08 Standard Specification for Steam or Valve Bronze Castings
  • B62-09 Standard Specification for Composition Bronze or Ounce Metal Castings
  • B63-07 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
  • B66/B66M-06e1 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
  • B67-05 Standard Specification for Car and Tender Journal Bearings, Lined
  • B68-02 Standard Specification for Seamless Copper Tube, Bright Annealed
  • B68M-99(2005) Standard Specification for Seamless Copper Tube, Bright Annealed [Metric]
  • B69-08 Standard Specification for Rolled Zinc
  • B70-90(2007) Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
  • B75-02 Standard Specification for Seamless Copper Tube
  • B75M-99(2005) Standard Specification for Seamless Copper Tube [Metric]
  • B76-90(2007) Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
  • B77-07 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
  • B78-90(2007) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
  • B80-07 Standard Specification for Magnesium-Alloy Sand Castings
  • B84-07 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
  • B85/B85M-08 Standard Specification for Aluminum-Alloy Die Castings
  • B86-08 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
  • B88-03 Standard Specification for Seamless Copper Water Tube
  • B88M-05 Standard Specification for Seamless Copper Water Tube [Metric]
  • B90/B90M-07 Standard Specification for Magnesium-Alloy Sheet and Plate
  • B91-07 Standard Specification for Magnesium-Alloy Forgings
  • B92/B92M-07 Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
  • B93/B93M-07 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
  • B94-07 Standard Specification for Magnesium-Alloy Die Castings
  • B96/B96M-06 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
  • B98/B98M-08 Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes
  • B99/B99M-06 Standard Specification for Copper-Silicon Alloy Wire for General Applications
  • B100-08 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
  • B101-07 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
  • B102-00(2005) Standard Specification for Lead- and Tin-Alloy Die Castings
  • B103/B103M-09 Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
  • B105-05 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
  • B106-08 Standard Test Methods for Flexivity of Thermostat Metals
  • B107/B107M-07 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
  • B108/B108M-08 Standard Specification for Aluminum-Alloy Permanent Mold Castings
  • B111/B111M-09 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
  • B114-07 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
  • B115-00(2004) Standard Specification for Electrolytic Copper Cathode
  • B116-95(2007) Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage
  • B117 Standard Practice for Operating Salt Spray (Fog) Apparatus
  • B121/B121M-01(2006) Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
  • B122/B122M-08 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
  • B124/B124M-08a Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
  • B127-05 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
  • B129-07 Standard Specification for Cartridge Brass Cartridge Case Cups
  • B130-08 Standard Specification for Commercial Bronze Strip for Bullet Jackets
  • B131-07 Standard Specification for Copper Alloy Bullet Jacket Cups
  • B134/B134M-08 Standard Specification for Brass Wire
  • B135-08a Standard Specification for Seamless Brass Tube
  • B135M-08a Standard Specification for Seamless Brass Tube [Metric]
  • B136-84(2008)e1 Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
  • B137-95(2004) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
  • B138/B138M-06 Standard Specification for Manganese Bronze Rod, Bar, and Shapes
  • B139/B139M-07 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
  • B140/B140M-07 Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
  • B148-97(2003)e1 Standard Specification for Aluminum-Bronze Sand Castings
  • B150/B150M-08 Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
  • B151/B151M-05 Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
  • B152/B152M-06ae1 Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
  • B153-05 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
  • B154-05 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
  • B159/B159M-05 Standard Specification for Phosphor Bronze Wire
  • B160-05e1 Standard Specification for Nickel Rod and Bar
  • B161-05e1 Standard Specification for Nickel Seamless Pipe and Tube
  • B162-99(2005)e1 Standard Specification for Nickel Plate, Sheet, and Strip
  • B163-08 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
  • B164-03(2008) Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
  • B165-05 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
  • B166-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
  • B167-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube
  • B168-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip
  • B169/B169M-05 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
  • B170-99(2004) Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
  • B171/B171M-09 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
  • B172-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
  • B173-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
  • B174-02(2007)e1 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
  • B176-08 Standard Specification for Copper-Alloy Die Castings
  • B177-01(2006)e1 Standard Guide for Engineering Chromium Electroplating
  • B179-06 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
  • B183-79(2004)e1 Standard Practice for Preparation of Low-Carbon Steel for Electroplating
  • B187/B187M-06 Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
  • B188-02 Standard Specification for Seamless Copper Bus Pipe and Tube
  • B189-05 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
  • B193-02(2008) Standard Test Method for Resistivity of Electrical Conductor Materials
  • B194-08 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
  • B196/B196M-07 Standard Specification for Copper-Beryllium Alloy Rod and Bar
  • B197/B197M-07 Standard Specification for Copper-Beryllium Alloy Wire
  • B199-07 Standard Specification for Magnesium-Alloy Permanent Mold Castings
  • B200-85(2004) Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
  • B201-80(2004) Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
  • B206/B206M-07 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
  • B208-06 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
  • B208-06 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings CHINESE TRANSLATION
  • B209-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
  • B209M-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
  • B210-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
  • B210M-05 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
  • B211-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
  • B211M-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
  • B212-99(2006) Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
  • B213-03 Standard Test Method for Flow Rate of Metal Powders
  • B214-07 Standard Test Method for Sieve Analysis of Metal Powders
  • B215-08 Standard Practices for Sampling Metal Powders
  • B216-97(2003) Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
  • B221M-07 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
  • B221-08 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
  • B223-08 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
  • B224-04 Standard Classification of Coppers
  • B226-04 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
  • B227-04 Standard Specification for Hard-Drawn Copper-Clad Steel Wire
  • B228-04 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
  • B229-04 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
  • B230/B230M-07 Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
  • B231/B231M-04 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
  • B232/B232M-01e1 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
  • B233-97(2007) Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
  • B234-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
  • B234M-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
  • B236M-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
  • B236-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
  • B237-01(2006) Standard Specification for Refined Antimony
  • B240-07e1 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
  • B241/B241M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
  • B242-99(2004)e1 Standard Guide for Preparation of High-Carbon Steel for Electroplating
  • B243-09 Standard Terminology of Powder Metallurgy
  • B244-09 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
  • B246-05 Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
  • B247-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
  • B247M-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
  • B248-07 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
  • B248M-07 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar [Metric]
  • B249/B249M-06 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
  • B250/B250M-07 Standard Specification for General Requirements for Wrought Copper Alloy Wire
  • B251M-97(2003) Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]
  • B251-02e1 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
  • B252-92(2004) Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
  • B253-87(2005)e1 Standard Guide for Preparation of Aluminum Alloys for Electroplating
  • B254-92(2004)e1 Standard Practice for Preparation of and Electroplating on Stainless Steel
  • B258-02(2008) Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  • B263-04 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
  • B265-09a Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
  • B267-07 Standard Specification for Wire for Use In Wire-Wound Resistors
  • B271-08 Standard Specification for Copper-Base Alloy Centrifugal Castings
  • B272-07 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
  • B275-05 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
  • B276-05e1 Standard Test Method for Apparent Porosity in Cemented Carbides
  • B277-95(2006) Standard Test Method for Hardness of Electrical Contact Materials
  • B279-04 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
  • B280-08 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
  • B281-88(2008) Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
  • B283-09 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
  • B286-07 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
  • B294-92(2006) Standard Test Method for Hardness Testing of Cemented Carbides
  • B296-03(2008) Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
  • B298-07 Standard Specification for Silver-Coated Soft or Annealed Copper Wire
  • B299-08 Standard Specification for Titanium Sponge
  • B301/B301M-08 Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
  • B302-07 Standard Specification for Threadless Copper Pipe, Standard Sizes
  • B306-09 Standard Specification for Copper Drainage Tube (DWV)
  • B308/B308M-02 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
  • B311-08 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
  • B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
  • B313/B313M-02e1 Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
  • B315-06 Standard Specification for Seamless Copper Alloy Pipe and Tube
  • B316/B316M-02 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
  • B317/B317M-07 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
  • B319-91(2004) Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
  • B320-60(2008) Standard Practice for Preparation of Iron Castings for Electroplating
  • B322-99(2004) Standard Guide for Cleaning Metals Prior to Electroplating
  • B324-01(2007) Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
  • B327-09 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
  • B328-96(2003)e1 Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings
  • B329-06 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
  • B330-07 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
  • B331-95(2002) Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
  • B333-03(2008) Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
  • B335-03(2008) Standard Specification for Nickel-Molybdenum Alloy Rod
  • B338-09 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
  • B339-00(2005) Standard Specification for Pig Tin
  • B343-92a(2004)e1 Standard Practice for Preparation of Nickel for Electroplating with Nickel
  • B344-01 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
  • B345/B345M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
  • B348-09 Standard Specification for Titanium and Titanium Alloy Bars and Billets
  • B349/B349M-09 Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
  • B350/B350M-02(2006) Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
  • B351/B351M-08e1 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
  • B352/B352M-02(2006) Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
  • B353-07 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
  • B354-05 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
  • B355-06 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
  • B359/B359M-02(2006) Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
  • B360-01 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
  • B361-08 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
  • B362-91(2008) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
  • B363-06a Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
  • B364-96(2009) Standard Specification for Tantalum and Tantalum Alloy Ingots
  • B365-98(2004) Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
  • B366-04be1 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
  • B367-09 Standard Specification for Titanium and Titanium Alloy Castings
  • B368-09 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
  • B369-09 Standard Specification for Copper-Nickel Alloy Castings
  • B370-09 Standard Specification for Copper Sheet and Strip for Building Construction
  • B371/B371M-08 Standard Specification for Copper-Zinc-Silicon Alloy Rod
  • B372-97(2003) Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
  • B373-00(2006) Standard Specification for Aluminum Foil for Capacitors
  • B374-06 Standard Terminology Relating to Electroplating
  • B379-04 Standard Specification for Phosphorized Coppers—Refinery Shapes
  • B380-97(2008)e1 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
  • B381-09 Standard Specification for Titanium and Titanium Alloy Forgings
  • B386-03 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
  • B387-90(2001) Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
  • B388-06 Standard Specification for Thermostat Metal Sheet and Strip
  • B389-81(2008) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
  • B390-92(2006) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
  • B391-03 Standard Specification for Niobium and Niobium Alloy Ingots
  • B392-03 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
  • B393-05 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
  • B394-03 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
  • B395/B395M-08 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
  • B398/B398M-02(2007) Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
  • B399/B399M-04 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
  • B400-08 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
  • B401-04 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
  • B403-07 Standard Specification for Magnesium-Alloy Investment Castings
  • B406-96(2005) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
  • B407-08a Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
  • B408-06 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
  • B409-06e1 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
  • B411/B411M-08 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
  • B413-97a(2008) Standard Specification for Refined Silver
  • B415-98(2007) Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
  • B416-98(2007) Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
  • B417-00(2006)e1 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
  • B418-08 Standard Specification for Cast and Wrought Galvanic Zinc Anodes
  • B422-08a Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
  • B423-05 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
  • B424-05 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
  • B425-99(2005) Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
  • B427-02 Standard Specification for Gear Bronze Alloy Castings
  • B428-09 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
  • B429/B429M-06 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
  • B430-97(2006)e1 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
  • B432-09 Standard Specification for Copper and Copper Alloy Clad Steel Plate
  • B434-06 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
  • B435-06 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
  • B438-08 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
  • B439-08 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
  • B440-00(2005) Standard Specification for Cadmium
  • B441-04 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
  • B443-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
  • B444-06 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
  • B446-03(2008) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar
  • B447-07 Standard Specification for Welded Copper Tube
  • B449-93(2004) Standard Specification for Chromates on Aluminum
  • B452-02 Standard Specification for Copper-Clad Steel Wire for Electronic Application
  • B453/B453M-08 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
  • B455-05 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
  • B456-03 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
  • B457-67(2008)e1 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
  • B462-06 Specification for Forged or Rolled UNS N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665, N10675,N10629, N08031,N06045, N06025, & R20033 Alloy Pipe Flanges, Forged Fitting, & Values & Parts for Corrosive
  • B463-04 Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip
  • B464-05 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe
  • B465-04 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
  • B466/B466M-07 Standard Specification for Seamless Copper-Nickel Pipe and Tube
  • B467-88(2003) Standard Specification for Welded Copper-Nickel Pipe
  • B468-04 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes
  • B470-02(2007) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
  • B472-04a Standard Specification for Nickel Alloy Billets and Bars for Reforging
  • B473-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
  • B474-03 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
  • B475-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
  • B476-01(2006) Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
  • B477-97(2008) Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
  • B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
  • B479-06 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
  • B480-88(2006) Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
  • B481-68(2008) Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
  • B482-85(2008) Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
  • B483/B483M-03 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications
  • B487-85(2007) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
  • B488-01(2006) Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
  • B489-85(2008)e1 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
  • B490-09 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
  • B491/B491M-06 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
  • B493/B493M-08 Standard Specification for Zirconium and Zirconium Alloy Forgings
  • B494/B494M-08 Standard Specification for Primary Zirconium
  • B495-05 Standard Specification for Zirconium and Zirconium Alloy Ingots
  • B496-04 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
  • B497-00(2006) Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts
  • B498/B498M-08 Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
  • B499-09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
  • B500/B500M-09 Standard Specification for Metallic Coated Stranded Steel Core for Use in Overhead Electrical Conductors
  • B501-04 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
  • B502-02(2007) Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced
  • B504-90(2007) Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
  • B505/B505M-08a Standard Specification for Copper Alloy Continuous Castings
  • B506-09 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
  • B507-86(2008)e1 Standard Practice for Design of Articles to Be Electroplated on Racks
  • B508-08 Standard Specification for Copper Alloy Strip for Flexible Metal Hose
  • B511-01(2005) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
  • B512-04 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
  • B514-05 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
  • B515-95(2002) Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
  • B516-03(2009) Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes
  • B517-05 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
  • B520-93(2007) Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
  • B521-98(2004) Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
  • B522-01(2006) Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
  • B523/B523M-07 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
  • B524/B524M-99(2005) Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
  • B527-06 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
  • B528-05 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
  • B530-02 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
  • B532-85(2007) Standard Specification for Appearance of Electroplated Plastic Surfaces
  • B533-85(2004) Standard Test Method for Peel Strength of Metal Electroplated Plastics
  • B534-07 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
  • B535-06 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
  • B536-07 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
  • B537-70(2007) Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
  • B539-02(2008) Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
  • B540-97(2008) Standard Specification for Palladium Electrical Contact Alloy
  • B541-01(2006) Standard Specification for Gold Electrical Contact Alloy
  • B542-07 Standard Terminology Relating to Electrical Contacts and Their Use
  • B543-07e1 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
  • B545-97(2004)e1 Standard Specification for Electrodeposited Coatings of Tin
  • B546-04 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
  • B547/B547M-02 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
  • B548-03 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
  • B549-04 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW)
  • B550/B550M-07 Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
  • B551/B551M-07 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
  • B552-08 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
  • B555-86(2007) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
  • B556-90(2007) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
  • B557-06 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
  • B557M-07e1 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
  • B558-79(2008) Standard Practice for Preparation of Nickel Alloys for Electroplating
  • B559-93(2007) Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
  • B560-00(2005) Standard Specification for Modern Pewter Alloys
  • B561-94(2005) Standard Specification for Refined Platinum
  • B562-95(2005) Standard Specification for Refined Gold
  • B563-01(2006) Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
  • B564-06a Standard Specification for Nickel Alloy Forgings
  • B565-04 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
  • B566-04a Standard Specification for Copper-Clad Aluminum Wire
  • B567-98(2003) Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
  • B568-98(2004) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
  • B569-09 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
  • B570-06 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
  • B571-97(2008)e1 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
  • B572-06 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
  • B573-06 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod
  • B574-06e1 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
  • B575-06 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip
  • B576-94(2005) Standard Guide for Arc Erosion Testing of Electrical Contact Materials
  • B577-93(2004)e1 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
  • B578-87(2004) Standard Test Method for Microhardness of Electroplated Coatings
  • B579-73(2004) Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
  • B580-79(2004) Standard Specification for Anodic Oxide Coatings on Aluminum
  • B581-02(2008) Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
  • B582-07 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
  • B584-08a Standard Specification for Copper Alloy Sand Castings for General Applications
  • B584-08a Standard Specification for Copper Alloy Sand Castings for General Applications CHINESE TRANSLATION
  • B587-08 Standard Specification for Welded Brass Tube
  • B588-88(2006) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
  • B589-94(2005) Standard Specification for Refined Palladium
  • B591-09 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
  • B592-01(2006) Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
  • B593-96(2003)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
  • B594-06 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
  • B595-95(2006) Standard Specification for Sintered Aluminum Structural Parts
  • B596-89(2006) Standard Specification for Gold-Copper Alloy Electrical Contact Material
  • B598-09 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
  • B599-92(2009)e1 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
  • B600-91(2002)e1 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
  • B601-07 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
  • B602-88(2005) Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
  • B603-07 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
  • B604-91(2008) Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
  • B605-95a(2004) Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
  • B606-08 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
  • B607-91(2008) Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
  • B608-07 Standard Specification for Welded Copper-Alloy Pipe
  • B609/B609M-99(2004) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
  • B610-08 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
  • B611-85(2005) Standard Test Method for Abrasive Wear Resistance of Cemented Carbides
  • B613-76(2006) Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
  • B614-05 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
  • B615-79(2006) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
  • B616-96(2006) Standard Specification for Refined Rhodium
  • B617-98(2004) Standard Specification for Coin Silver Electrical Contact Alloy
  • B618/B618M-08 Standard Specification for Aluminum-Alloy Investment Castings
  • B619-06 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
  • B620-03(2008) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
  • B621-02(2006) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
  • B622-06 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
  • B624-07 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
  • B625-05 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip
  • B626-06 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
  • B628-98(2004) Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
  • B629-77(2008) Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
  • B630-88(2006) Standard Practice for Preparation of Chromium for Electroplating with Chromium
  • B631-93(2004) Standard Specification for Silver-Tungsten Electrical Contact Materials
  • B632/B632M-08 Standard Specification for Aluminum-Alloy Rolled Tread Plate
  • B633-07 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
  • B634-88(2004)e1 Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
  • B635-00(2004)e1 Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
  • B636-84(2006)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
  • B637-06e1 Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
  • B639-02(2008) Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
  • B640-07 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
  • B643-00(2005) Standard Specification for Copper-Beryllium Alloy Seamless Tube
  • B644-05 Standard Specification for Copper Alloy Addition Agents
  • B645-07 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
  • B646-06a Standard Practice for Fracture Toughness Testing of Aluminum Alloys
  • B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
  • B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
  • B649-06 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
  • B650-95(2008) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
  • B651-83(2006) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
  • B652/B652M-04 Standard Specification for Niobium-Hafnium Alloy Ingots
  • B653/B653M-06 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
  • B654/B654M-04 Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
  • B655/B655M-04 Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire
  • B657-05 Guide for Metallographic Identification of Microstructure in Cemented Carbides
  • B658/B658M-06 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
  • B659-90(2008)e1 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
  • B660-08 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
  • B661-06 Standard Practice for Heat Treatment of Magnesium Alloys
  • B662-94(2006) Standard Specification for Silver-Molybdenum Electrical Contact Material
  • B663-94(2006) Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
  • B664-90(2006) Standard Specification for 80% Silver-20 % Graphite Sliding Contact Material
  • B665-08 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
  • B666/B666M-08 Standard Practice for Identification Marking of Aluminum and Magnesium Products
  • B667-97(2009) Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
  • B668-05 Standard Specification for UNS N08028 Seamless Pipe and Tube
  • B670-07 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
  • B671-81(2005) Standard Specification for Refined Iridium
  • B672-02(2007) Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
  • B673-05e1 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
  • B674-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
  • B675-02(2007) Standard Specification for UNS N08367 Welded Pipe
  • B676-03(2009) Standard Specification for UNS N08367 Welded Tube
  • B677-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
  • B678-86(2006) Standard Test Method for Solderability of Metallic-Coated Products
  • B679-98(2004)e1 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
  • B680-80(2004) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
  • B682-01 Standard Specification for Standard Metric Sizes of Electrical Conductors
  • B683-01(2006) Standard Specification for Pure Palladium Electrical Contact Material
  • B684-97(2008) Standard Specification for Platinum-Iridium Electrical Contact Materials
  • B685-01(2006) Standard Specification for Palladium-Copper Electrical Contact Material
  • B686/B686M-08 Standard Specification for Aluminum Alloy Castings, High-Strength
  • B687-99(2005)e1 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
  • B688-96(2009) Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
  • B689-97(2008) Standard Specification for Electroplated Engineering Nickel Coatings
  • B690-02(2007) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
  • B691-02(2007) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
  • B692-90(2006) Standard Specification for 75% Silver-25 % Graphite Sliding Contact Material
  • B693-91(2006) Standard Specification for Silver-Nickel Electrical Contact Materials
  • B694-03 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
  • B695-04 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
  • B696-00(2004)e1 Standard Specification for Coatings of Cadmium Mechanically Deposited
  • B697-88(2005) Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
  • B698-02 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
  • B699-86(2008) Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
  • B700-08 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
  • B701/B701M-06 Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
  • B702-93(2004) Standard Specification for Copper-Tungsten Electrical Contact Material
  • B703-05 Standard Test Method for Apparent Density of Powders Using Arnold Meter
  • B704-03 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
  • B705-05 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
  • B706-00(2006) Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
  • B708-05 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
  • B709-04(2009) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip
  • B710-04 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
  • B711-05 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
  • B712-93(2006) Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
  • B715-96(2001) Standard Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications
  • B717-96(2006) Standard Specification for Refined Ruthenium
  • B718-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
  • B719-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
  • B722-06 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
  • B723-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
  • B724-00(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
  • B725-05 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
  • B726-02(2006) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
  • B727-04 Standard Practice for Preparation of Plastics Materials for Electroplating
  • B729-05 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
  • B730-08 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
  • B731-96(2006) Standard Specification for 60% Palladium-40 % Silver Electrical Contact Material
  • B733-04 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
  • B734-97(2008) Standard Specification for Electrodeposited Copper for Engineering Uses
  • B735-06 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
  • B736-00(2006) Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
  • B737-05 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
  • B738-03(2008) Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
  • B739-03(2008) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
  • B740-02 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
  • B742-90(2006) Standard Specification for Fine Silver Electrical Contact Fabricated Material
  • B743-06 Standard Specification for Seamless Copper Tube in Coils
  • B744/B744M-05 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
  • B745/B745M-97(2005) Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
  • B746/B746M-02(2007) Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
  • B747-07 Standard Specification for Copper-Zirconium Alloy Sheet and Strip
  • B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
  • B749-03 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
  • B750-08 Standard Specification for Galfan (Zinc-5%/10% Aluminum-mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
  • B751-08 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
  • B752-06 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
  • B753-07 Standard Specification for Thermostat Component Alloys
  • B754-89(2005) Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
  • B755-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
  • B756-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
  • B757-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
  • B758-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
  • B759-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
  • B760-07 Standard Specification for Tungsten Plate, Sheet, and Foil
  • B761-06 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
  • B762-90(2005) Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
  • B763-08a Standard Specification for Copper Alloy Sand Castings for Valve Applications
  • B764-04 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
  • B765-03(2008) Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
  • B766-86(2008) Standard Specification for Electrodeposited Coatings of Cadmium
  • B767-88(2006) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
  • B768-99(2004) Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
  • B769-07 Standard Test Method for Shear Testing of Aluminum Alloys
  • B770-08 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
  • B771-87(2006) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
  • B772-97(2008) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
  • B773-96(2008) Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies
  • B774-00(2005)e1 Standard Specification for Low Melting Point Alloys
  • B775-08 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
  • B776-07 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
  • B777-07 Standard Specification for Tungsten Base, High-Density Metal
  • B778-02(2007) Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
  • B779-03 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
  • B780-98(2004) Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
  • B781-93a(2006) Standard Guide for Silver-Cadmium Oxide Contact Material
  • B783-04 Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts
  • B784-01(2006) Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
  • B786-08 Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
  • B787/B787M-04 Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
  • B788/B788M-04 Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
  • B789/B789M-99(2005) Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
  • B790/B790M-00(2006) Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
  • B792-08 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
  • B793-08 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
  • B794-97(2009) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
  • B795-07 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
  • B796-07 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (PF) Applications
  • B797-93(2007) Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts
  • B798-95(2005) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
  • B799-95(2005) Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
  • B800-05 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
  • B801-07 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
  • B802/B802M-08 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
  • B803-08 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
  • B804-02(2007) Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
  • B805-06 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
  • B806-08a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
  • B806-08a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications CHINESE TRANSLATION
  • B807/B807M-06 Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
  • B808-05 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
  • B809-95(2008) Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (「Flowers-of-Sulfur」
  • B810-01a(2006) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
  • B811-02(2007) Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
  • B812-96(2008) Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
  • B813-00(2009) Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
  • B814-06 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
  • B815-02(2006) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
  • B816-00(2004)e1 Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
  • B817-08 Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components
  • B818-03(2008) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
  • B819-00(2006) Standard Specification for Seamless Copper Tube for Medical Gas Systems
  • B820-09 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
  • B821-02(2007) Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
  • B822-02 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
  • B823-01 Standard Specification for Materials for Nonferrous Powder Metallurgy (P/M) Structural Parts
  • B824-09 Standard Specification for General Requirements for Copper Alloy Castings
  • B824-04 Standard Specification for General Requirements for Copper Alloy Castings CHINESE TRANSLATION
  • B825-02(2008) Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
  • B826-03 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
  • B827-05 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
  • B828-02 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
  • B829-04a(2009) Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
  • B830-97(2003) Standard Specification for Uniform Test Methods and Frequency
  • B831-05 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
  • B832-93(2008) Standard Guide for Electroforming with Nickel and Copper
  • B833-06 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
  • B834-95(2003) Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
  • B835-04 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
  • B836-00(2005) Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
  • B837-01 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems
  • B839-04 Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod—Inclined Wedge Method
  • B840-99(2004) Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
  • B841-99(2004) Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
  • B842-99(2005) Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
  • B843-07 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
  • B844-98(2004) Standard Guide for Silver-Tin Oxide Contact Material
  • B845-97(2008)e1 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
  • B846-06a Standard Terminology for Copper and Copper Alloys
  • B846-06a Standard Terminology for Copper and Copper Alloys CHINESE TRANSLATION
  • B848-05 Specification for Powder Forged (P/F) Ferrous Materials
  • B849-02(2007) Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
  • B850-98(2004) Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
  • B851-04 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
  • B852-08 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
  • B853-07 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
  • B854-98(2004) Standard Guide for Measuring Electrical Contact Intermittences
  • B855-06 Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
  • B856-03 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
  • B857-09 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
  • B858-06 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
  • B859-03(2008)e1 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
  • B860-09 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
  • B861-08a Standard Specification for Titanium and Titanium Alloy Seamless Pipe
  • B862-09 Standard Specification for Titanium and Titanium Alloy Welded Pipe
  • B863-09 Standard Specification for Titanium and Titanium Alloy Wire
  • B864/B864M-08 Standard Specification for Corrugated Aluminum Box Culverts
  • B865-04 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
  • B866-95(2008) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
  • B867-95(2008) Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
  • B868-96(2008) Standard Practice for Contact Performance Classification of Electrical Connection Systems
  • B869-07 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
  • B870-08 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
  • B871-01(2007) Standard Test Method for Tear Testing of Aluminum Alloy Products
  • B872-06 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
  • B873-01(2007) Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
  • B874-96(2008) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
  • B875-96(2008) Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
  • B877-96(2008) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
  • B878-97(2009) Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
  • B879-97(2008)e1 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
  • B880-03(2008) Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
  • B881-05 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
  • B882-05 Specification for Pre-Patinated Copper for Architectural Applications
  • B883-05 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials
  • B884-05 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
  • B885-09 Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
  • B886-03(2008) Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
  • B887-03(2008)e1 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
  • B888-08 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
  • B890-07 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
  • B891-98(2004) Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins
  • B892-03 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
  • B893-98(2008) Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
  • B894-03 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
  • B895-05 Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (P/M) Parts/Specimens by Immersion in a Sodium Chloride Solution
  • B896-99(2005) Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
  • B897-03 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo and Block Ingot
  • B898-05e1 Standard Specification for Reactive and Refractory Metal Clad Plate
  • B899-06 Standard Terminology Relating to Non-ferrous Metals and Alloys
  • B900-04 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
  • B901-04 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
  • B902-04a Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
  • B903-00(2005) Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
  • B904-00(2004) Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
  • B905-00(2005) Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
  • B906-02(2006) Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
  • B907-05 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
  • B908-03(2008) Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
  • B909-00(2006) Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
  • B910/B910M-07 Standard Specification for Annealed Copper-Clad Steel Wire
  • B911/B911M-05 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
  • B912-02(2008)e1 Standard Specification for Passivation of Stainless Steels Using Electropolishing
  • B913-05 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
  • B914-03(2008) Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
  • B915-01(2007) Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating
  • B916-01(2007) Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
  • B917/B917M-08 Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
  • B918/B918M-09 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
  • B919-01(2006) Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
  • B920-01(2006)e1 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
  • B921-08 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
  • B922-02(2008) Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
  • B923-02(2008) Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
  • B924-02(2006) Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
  • B925-08 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
  • B926-03 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
  • B927/B927M-08a Standard Specification for Brass Rod, Bar, and Shapes
  • B928/B928M-07 Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments
  • B929-05 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
  • B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
  • B931-09 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts
  • B932-04 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip
  • B933-09 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
  • B934-04a Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
  • B935-05 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials
  • B936-08 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
  • B937-04 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
  • B938-04 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510)
  • B939-05 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials
  • B940-05 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
  • B941-05 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
  • B942-05 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
  • B943-05 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
  • B944-06 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
  • B945-06 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
  • B946-06 Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products
  • B947-06 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
  • B949-08 Standard Specification for General Requirements for Zinc and Zinc Alloy Products
  • B950-06 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
  • B951-08 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
  • B952-08 Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
  • B953-07 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
  • B954-07 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
  • B955/B955M-08 Standard Specification for Aluminum-Alloy Centrifugal Castings
  • B956-07e2 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
  • B957-08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors
  • B958-08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
  • B960-08 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
  • B961-08 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application
  • B962-08 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes' Principle
  • B963-08 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes' Principle
  • B964-09 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
  • B965-09 Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
  • B967/B967M-09 Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
  • B994/B994M-15 Standard Specification for Nickel-Cobalt Alloy Coating

C

  • ASTM C 31 Standard Practice for Making and Curing Concrete Test Specimens in the Field
  • ASTM C 33 Standard Test Method for Fine and coarse aggregates
  • ASTM C 39 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
  • ASTM C 91 Cement Standards and Concrete Standards
  • ASTM C 91 - 05 Standard Specification for Masonry Cement
  • ASTM C 150 Standard Specification for Portland Cement
  • ASTM C 309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
  • ASTM C 618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
  • ASTM C 876 Standard Test Method for Half-Cell Potential of uncoated reinforcing steel in concrete
  • ASTM C 813-90 Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
  • ASTM C 857-14 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
  • ASTM C 926 Standard Specification for Application of Portland Cement-Based Plaster
  • ASTM C 955 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
  • ASTM C 1112 Standard Guide for Application of Radiation Monitors to the Control and Physical Security of Special Nuclear Material
  • ASTM C 1130-17 Standard Practice for Calibration of Thin Heat Flux Transducers
  • ASTM C1155 Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
  • ASTM C 1202 Standard Test Method for Electrical Indication of Chloride's Ability to Resist Chloride Ion Penetration
  • ASTM C 1270 Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
  • ASTM C 1271 Standard Test Method for X-Ray Spectrometric Analysis of Lime and Limestone
  • ASTM C 1321 - 04 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
  • ASTM C0141 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducer
  • ASTM C 1349 Standard Specification for Architectural Flat Glass Clad Polycarbonate

D

  • ASTM D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
  • ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester \
  • ASTM D97 Pour Point
  • ASTM D149 Dielectric Strength
  • ASTM D150 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • ASTM D256 Impact Strength
  • ASTM D421 - 85(2007) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
  • ASTM D422 - 63(2007)e2 Standard Test Method for Particle-Size Analysis of Soils
  • ASTM D531 -00(2010) Standard Test Method for Rubber Property-Pusey and Jones Indentation
  • ASTM D543 Chemical Resistance
  • ASTM D570 Water Absorption
  • ASTM D698 - 12e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
  • ASTM D854 - 14 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
  • ASTM D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
  • ASTM D1044 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
  • ASTM D1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
  • ASTM D1140 - 14 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
  • ASTM D1193 Standard Specification for Reagent Water [2]
  • ASTM D1457 Elongation
  • ASTM D1556 / D1556M - 15 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
  • ASTM D1557 - 12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
  • ASTM D1708 Tensile Strength
  • ASTM D1746 Standard Test Method for Transparency of Plastic Sheeting
  • ASTM D1883 - 14 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
  • ASTM D1894 Coefficient of Friction
  • ASTM D2156 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
  • ASTM D2166 / D2166M - 13 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
  • ASTM D2216 - 10 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
  • ASTM D2240 Hardness
  • ASTM D2244 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
  • ASTM D2412 Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
  • ASTM D2434-68(2006) Standard Test Method for Permeability of Granular Soils (Constant Head) (Withdrawn 2015)
  • ASTM D2435 / D2435M - 11 Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
  • ASTM D2487 - 11 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
  • ASTM D2488 - 09a Standard Practice for Description and Identification of Soils (Visual-Manual Procedure) [ds/D2488.htm
  • ASTM D3039 / D3039M Standard Test Method for Tensile Properties for Polymer Matrix Composite Materials
  • ASTM D3080 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
  • ASTM D3566 Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
  • ASTM D3740 - 12a Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
  • ASTM D3786 Bursting strength for Knit fabric and non woven material
  • ASTM D4123-82(1995) Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures
  • ASTM D4220 / D4220M - 14 Standard Practices for Preserving and Transporting Soil Samples
  • ASTM D4236 - 94(2005) Standard Practice for Labeling Art Materials for Chronic Health Hazards
  • ASTM D4318 - 10e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  • ASTM D4356 Standard Practice for Establishing Consistent Test Method Tolerances
  • ASTM D5084 - 10 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • ASTM D5116 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products
  • ASTM D5162-08 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
  • ASTM D5375 Standard Test Methods for Liner removal at High Speeds from Pressure-Sensitive Label Stock
  • ASTM D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D6252 Standard Test Method for Peel Adhesion of Pressure Sensitive Label Stocks at 90° Angle
  • ASTM D6284 Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
  • ASTM D6484 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • ASTM D6624 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV)
  • ASTM D6712 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
  • ASTM D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
  • ASTM D6938 - 10 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
  • ASTM D6913 - 04(2009)e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
  • ASTM D7240 Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)
  • ASTM D7264-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
  • ASTM D7298-06 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
  • ASTM D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • ASTM D7490 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
  • ASTM D7547 Aviation fuel U91
  • ASTM D7913 / D7913M Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing

E

  • ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials.
  • ASTM E18 Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
  • ASTM E21 Test Methods for Elevated Temperature Tension Tests of Metallic Materials
  • ASTM E31 Healthcare Informatics
  • ASTM E45 Standard Test Methods for Determining the Inclusion Content of Steel
  • ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials
  • ASTM E96 Standard Test Methods for Water Vapor Transmission of Materials
  • ASTM E112 Test Methods for Determining Average Grain Size
  • ASTM E119 Standard Test Methods for Fire Tests of Building Construction and Materials
  • ASTM E139 Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
  • ASTM E150 Practice for Conducting Creep and Creep-Rupture Tension Tests of Metallic Materials Under Conditions of Rapid Heating and Short Times
  • ASTM E151 Practice for Tension Tests of Metallic Materials at Elevated Temperatures with Rapid Heating and Conventional or Rapid Strain Rates
  • ASTM E155 Reference Radiographs for Inspection of Aluminum and Magnesium Castings
  • ASTM E165 Standard Practice for Liquid Penetrant Examination
  • ASTM E290 Standard Test Methods for Bend Testing of Material for Ductility
  • ASTM E292 Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
  • ASTM E328 Methods for Stress-Relaxation Tests for Materials and Structures
  • ASTM E313 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
  • ASTM E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
  • ASTM E407 Standard Practice for Microetching Metals and Alloys [3]
  • ASTM E446 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
  • ASTM E460 Practice for Determining Effect of Packaging on Food and Beverage Products During Storage
  • ASTM E566 Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals
  • ASTM E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
  • ASTM E779 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
  • ASTM E903 Standard Test Method for Solar Absorbance, Reflectance and Transmittance of Materials Using Integrating Spheres
  • ASTM E1155 Standard Test Method for Determining FF Flatness and FL Levelness Numbers, pertaining primarily to cast-in-place concrete floors
  • ASTM E1169 Standard Guide for Conducting Ruggedness Tests
  • ASTM E1316: "Standard Terminology for Nondestructive Examinations"
  • ASTM E1417 Standard Practice for Liquid Penetrant Testing
  • ASTM E1444 Standard Practice for Magnetic Particle Testing
  • ASTM E1488 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
  • ASTM E1558 Standard Guide for Electrolytic Polishing of Metallographic Specimens
  • ASTM E1714
  • ASTM E1751 Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations
  • ASTM E1870 Test Method for Odor and Taste Transfer from Polymeric Packaging Film
  • ASTM E2369 Standard Specification for Continuity of Care Record (CCR)
  • ASTM E2395
  • ASTM E2500 Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment
  • ASTM E2691 Standard Practice for Job Productivity Measurement

F

  • ASTM F86 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
  • ASTM F136 Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications
  • ASTM F432 Standard Specification for Roof and Rock Bolts and Accessories
  • ASTM F436 Standard Specification for Hardened Steel Washers
  • ASTM F436M Standard Specification for Hardened Steel Washers (Metric)
  • ASTM F568M Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners. Withdrawn January 2012 due to ISO 898-1.[4]
  • ASTM F 571
  • ASTM F 606 Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets
  • ASTM F 626
  • ASTM F 756-08 Standard Practice for Assessment of Hemolytic Properties of Materials
  • ASTM F 792 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
  • ASTM F 876 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
  • ASTM F 877 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
  • ASTM F 883
  • ASTM F 899-12 Standard Specification for Wrought Stainless Steels for Surgical Instruments
  • ASTM F 963 Standard Consumer Safety Specification for Toy Safety. See ASTM F 963
  • ASTM F 1450
  • ASTM F 1575 Test Method for Determining Bending Yield Moment of Nails[5]
  • ASTM F 1577
  • ASTM F 1592
  • ASTM F 1643
  • ASTM F 1667 Standard Specification for Driven Fasteners: Nails, Spikes and Staples [6]
  • ASTM F 1712
  • ASTM F 1807 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
  • ASTM F 1915
  • ASTM F 1929 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
  • ASTM F 2080 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water
  • ASTM F 2043 Standard Classification for Bicycle Usage
  • ASTM F 2080 Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe[7]
  • ASTM F 2159 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
  • ASTM F 2248
  • ASTM F 2322
  • ASTM F 2348
  • ASTM F 2412 - 05 Standard Test Methods for Foot Protection. See ASTM F 2412
  • ASTM F 2413 - 05 Standard Specification for Performance Requirements for Foot Protection. See ASTM F 2413
  • ASTM F 2761 - 09 Essential safety requirements for equipment comprising the patient-centric integrated clinical environment (ICE) — Part 1: General requirements and conceptual model
  • ASTM F3125 Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions. This is a combination of previous specifications A325, A325M, A490, A490M, F1852, and F2280.[8]
  • ASTM F 3159 - 15 Standard Safety Specification for Liquid Laundry Packets. See ASTM F 3159

G

  • G1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
  • G2/G2M Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360°C) or in Steam at 750°F (400°C)
  • G3 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
  • G4 Standard Guide for Conducting Corrosion Tests in Field Applications
  • G5 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
  • G6 Standard Test Method for Abrasion Resistance of Pipeline Coatings
  • G7/G7M Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
  • G8 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
  • G9 Standard Test Method for Water Penetration into Pipeline Coatings
  • G10 Standard Test Method for Specific Bendability of Pipeline Coatings
  • G11 Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings
  • G12 Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel (Withdrawn 2013, replaced by D7091)
  • G13/G13 Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test)
  • G14 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
  • G15 Standard Terminology Relating to Corrosion and Corrosion Testing (Withdrawn 2010, replaced by ASTM NACE / ASTMG193)
  • G16 Standard Guide for Applying Statistics to Analysis of Corrosion Data
  • G17 Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
  • G18 Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
  • G19 Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial (Withdrawn 2010, no replacement)
  • G20 Standard Test Method for Chemical Resistance of Pipeline Coatings
  • G21 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
  • G24 Standard Practice for Conducting Exposures to Daylight Filtered Through Glass
  • G28 Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
  • G29 Standard Practice for Determining Algal Resistance of Plastic Films
  • G30 Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
  • G31 (ASTM/NACE) Standard Guide for Laboratory Immersion Corrosion Testing of Metals
  • G32 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
  • G33 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
  • G34 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
  • G35 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
  • G36 Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
  • G37 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys
  • G38 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
  • G39 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
  • G40 Standard Terminology Relating to Wear and Erosion
  • G41 Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
  • G42 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
  • G44 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution
  • G46 Standard Guide for Examination and Evaluation of Pitting Corrosion
  • G47 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
  • G48 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
  • G49 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
  • G50 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
  • G51 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
  • G52 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
  • G55 Standard Test Method for Evaluating Pipeline Coating Patch Materials
  • G56 Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials
  • G57 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
  • G58 Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
  • G59 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
  • G60 Standard Practice for Conducting Cyclic Humidity Exposures
  • G61 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
  • G62 Standard Test Methods for Holiday Detection in Pipeline Coatings
  • G63 Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
  • G64 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
  • G65 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
  • G66 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
  • G67 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
  • G69 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
  • G70 Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test) (Withdrawn 2013, no replacement)
  • G71 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
  • G72/G72M Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
  • G73 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
  • G74 Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
  • G75 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
  • G76 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
  • G77 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
  • G78 Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
  • G80 Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings (Withdrawn 2013, no replacement)
  • G81 Standard Test Method for Jaw Crusher Gouging Abrasion Test
  • G82 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
  • G84 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
  • G85 Standard Practice for Modified Salt Spray (Fog) Testing
  • G86 Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
  • G87 Standard Practice for Conducting Moist SO2 Tests
  • G88 Standard Guide for Designing Systems for Oxygen Service
  • G90 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
  • G91 Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation
  • G92 Standard Practice for Characterization of Atmospheric Test Sites
  • G93 Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
  • G94 Standard Guide for Evaluating Metals for Oxygen Service
  • G95 Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
  • G96 Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
  • G97 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
  • G98 Standard Test Method for Galling Resistance of Materials
  • G99 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
  • G100 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
  • G101 Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
  • G102 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
  • G103 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution
  • G105 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
  • G106 Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
  • G107 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
  • G108 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
  • G109 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
  • G110 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
  • G111 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
  • G112 Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
  • G113 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
  • G114 Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
  • G115 Standard Guide for Measuring and Reporting Friction Coefficients
  • G116 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
  • G117 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests (Withdrawn 2016, no replacement)
  • G118 Standard Guide for Recommended Format of Wear Test Data Suitable for Databases (Withdrawn 2016, no replacement)
  • G119 Standard Guide for Determining Synergism Between Wear and Corrosion
  • G120 Standard Practice for Determination of Soluble Residual Contamination in by Soxhlet Extraction
  • G121 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
  • G122 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
  • G123 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
  • G124 Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
  • G125 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
  • G126 Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
  • G127 Standard Guide for the Selection of Cleaning Agents for Oxygen Systems
  • G128/G128M Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems
  • G129 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
  • G130 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • G131 Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
  • G132 Standard Test Method for Pin Abrasion Testing
  • G133 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
  • G134 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
  • G135 Standard Guide for Computerized Exchange of Corrosion Data for Metals
  • G136 Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
  • G137 Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
  • G138 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
  • G139 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
  • G140 Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
  • G141 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
  • G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
  • G143 Standard Test Method for Measurement of Web/Roller Friction Characteristics
  • G144 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
  • G145 Standard Guide for Studying Fire Incidents in Oxygen Systems
  • G146 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
  • G147 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
  • G148 Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique
  • G150 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
  • G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
  • G152 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • G153 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • G154 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
  • G155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
  • G156 Standard Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test
  • G157 Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries
  • G158 Standard Guide for Three Methods of Assessing Buried Steel Tanks
  • G160 Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials by Laboratory Soil Burial
  • G161 Standard Guide for Corrosion-Related Failure Analysis
  • G162 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
  • G163 Standard Guide for Digital Data Acquisition in Wear and Friction Measurements (Withdrawn 2016, no replacement)
  • G164 Standard Test Method for Determination of Surface Lubrication on Flexible Webs
  • G165 Standard Practice for Determining Rail-to-Earth Resistance
  • G166 Standard Guide for Statistical Analysis of Service Life Data
  • G167 Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer
  • G168 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
  • G169 Standard Guide for Application of Basic Statistical Methods to Weathering Tests
  • G170 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
  • G171 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
  • G172 Standard Guide for Statistical Analysis of Accelerated Service Life Data
  • G173 Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface
  • G174 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
  • G175 Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications
  • G176 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method
  • G177 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
  • G178 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
  • G179 Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
  • G180 Standard Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete
  • G181 Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
  • G182 Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings
  • G183 Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
  • G184 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
  • G185 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
  • G186 Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
  • G187 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
  • G188 Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
  • G189 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
  • G190 Standard Guide for Developing and Selecting Wear Tests
  • G192 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
  • G193 (ASTM/NACE) Standard Terminology and Acronyms Relating to Corrosion
  • G194 Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
  • G195 Standard Guide for Conducting Wear Tests Using a Rotary Platform, Double-Head Abraser
  • G196 Standard Test Method for Galling Resistance of Material Couples
  • G197 Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces
  • G199 Standard Guide for Electrochemical Noise Measurement
  • G200 Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
  • G201 Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation
  • G202 Standard Test Method for Using Atmospheric Pressure Rotating Cage
  • G203 Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
  • G204 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
  • G205 Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
  • G206 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
  • G207 Standard Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers
  • G208 Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
  • G209 Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
  • G210 Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus
  • G211 Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
  • G213 Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
  • G214 Standard Test Method for Integration of Digital Spectral Data for Weathering and Durability Applications
  • G215 Standard Guide for Electrode Potential Measurement
  • G217 Standard Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method

See also

References

  1. ↑ "ASTM A255 - 10(2014) Standard Test Methods for Determining Hardenability of Steel". ASTM. 2014. Retrieved August 29, 2017.
  2. ↑ https://www.astm.org/Standards/D1193.htm
  3. ↑ http://www.astm.org/Standard/alpha-lists/E.html
  4. ↑ ASTM.org - F568M
  5. ↑ ASTM F16.05 subcommittee on driven fasteners
  6. ↑ ASTM F16.05 subcommittee on driven fasteners
  7. ↑ https://www.astm.org/Standards
  8. ↑ "Structural Bolting Specification Change", GlaserBolt, Retrieved March 11, 2016
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.