Lake Manchester Dam

Lake Manchester Dam
Location of the Lake Manchester Dam
in Queensland
Country Australia
Location South East Queensland
Coordinates 27°29′17″S 152°45′5″E / 27.48806°S 152.75139°E / -27.48806; 152.75139Coordinates: 27°29′17″S 152°45′5″E / 27.48806°S 152.75139°E / -27.48806; 152.75139
Purpose
Status Operational
Construction began 1912 (1912)
Opening date
  • 1916 (1916)
  • 2008 (2008) (upgrade)
Operator(s) SEQ Water
Dam and spillways
Type of dam Gravity dam
Impounds Cabbage Tree Creek
Height 38 m (125 ft)[1]
Length 277 m (909 ft)[1]
Dam volume 45×10^3 m3 (1.6×10^6 cu ft)[1]
Spillway type Uncontrolled
Spillway capacity 450 m3/s (16,000 cu ft/s)[1]
Reservoir
Creates Lake Manchester
Total capacity 26,000 ML (5.7×109 imp gal; 6.9×109 US gal)[2][3]
Catchment area 74 km2 (29 sq mi)[1][2]
Surface area 318 ha (790 acres)[2][3]
Website
www.seqwater.com.au

The Lake Manchester Dam is a concrete gravity dam with an un-gated spillway across the Cabbage Tree Creek that is located in the South East region of Queensland, Australia. The main purpose of the dam is for potable water supply of Brisbane.[1][3] The impounded reservoir is called Lake Manchester.

Location and features

The dam is located in the area surrounding the suburb of the same name, approximately 15 kilometres (9.3 mi) north of Ipswich. The primary inflow of the reservoir is the Cabbage Tree Creek, not far above its confluence with the Brisbane River.[3] Its original purpose was to supplement supplies when the flow of the Brisbane River was low. Today it is one of a number of dams connected to the South East Queensland Water Grid.

The concrete dam structure is 38 metres (125 ft) high and 227 metres (745 ft) long. The 45-thousand-cubic-metre (1.6×10^6 cu ft) dam wall holds back the 26,000-megalitre (5.7×109 imp gal; 6.9×109 US gal) reservoir when at full capacity. From a catchment area of 74 square kilometres (29 sq mi) that includes much of the western slopes of the D'Aguilar Range, the dam creates Lake Manchester, with a surface area of 318 hectares (790 acres). The uncontrolled un-gated spillway has a discharge capacity of 450 cubic metres per second (16,000 cu ft/s).[1] Initially managed by the Metropolitan Water Supply and Sewerage Board, and then the Brisbane City Council, management of the dam was transferred to Seqwater in July 2008.

History

The Enoggera Dam, the Gold Creek Dam and the Mount Crosby Weir were built to supply water to Brisbane but could not meet growing demand. A site 2.8 kilometres (1.7 mi) upstream from the creek's confluence with the Brisbane River was selected as this was the next catchment to the west in the D'Aguilar Range. The designer was Allan Hazen, an American engineer.[4] Construction of the Lake Manchester Dam commenced in 1912 and when it was completed in 1916,[5][6] it was the fourtholdest dam in Queensland[1] and was originally called the Cabbage Tree Creek Dam.[4] The dam was renamed in 1916 in honour of E. J. T. Manchester, the president of the Metropolitan Water Supply and Sewerage Board.[4] In 1924 the elevation of the bywash was raised which added to the dams capacity.[4]

In October 2005 the dam was reactivated as drought reduced the region's water supply to a critical point.[5] The same year a report claimed that due to leaks and cracks the structure could break in a severe rain storm event.[6] In 2007 the dam's capacity was again raised and connection to the regional water grid was re-established. The Lake Manchester Dam Flood Security Upgrade was a Brisbane City Council project to ensure that the dam met the Australian National Committee on Large Dams (ANCOLD) guidelines for large dams.[5] The project involved strengthening and raising the dam wall for flood security purposes. Work began in early 2007[5] and was completed in 2008.[2]

Recreational

Recreational activities which are permitted around the dam include barbecuing, camping, horse riding, mountain biking, picnicking and bushwalking.[2]

See also

References

  1. 1 2 3 4 5 6 7 8 9 "Register of Large Dams in Australia" (Excel (requires download)). Dams information. Australian National Committee on Large Dams. 2010. Retrieved 4 July 2014.
  2. 1 2 3 4 5 "Lake Manchester Dam". Water supply: Dams and weirs. Seqwater. 2014. Retrieved 4 July 2014.
  3. 1 2 3 4 Harrison, Rod; James, Ernie; Sully, Chris; Classon, Bill; Eckermann, Joy (2008). Queensland Dams. Bayswater, Victoria: Australian Fishing Network. ISBN 978-1-86513-134-4.
  4. 1 2 3 4 Horton, Helen (1988). Brisbane's Back Door: The story of the D'Aguilar Range. Bowen Hills, Queensland: Boolarong Publications. p. 79. ISBN 0-86439-036-X.
  5. 1 2 3 4 "Lake Manchester Dam Flood Security Upgrade". Brisbane City Council. Archived from the original on 23 September 2009. Retrieved 2009-10-06.
  6. 1 2 "Lake Manchester leaks a risk". International Water Power and Dam Construction. Global Trade Media. 21 December 2005. Retrieved 6 October 2009.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.