International System of Quantities

The International System of Quantities (ISQ) is a system based on seven base quantities: length, mass, time, electric current, thermodynamic temperature, amount of substance, and luminous intensity. Other quantities such as area, pressure, and electrical resistance are derived from these base quantities by clear, non-contradictory equations. The ISQ defines the quantities that are measured with the SI units^[1] and also includes many other quantities in modern science and technology.^[2] The ISQ is defined in the international standard ISO/IEC 80000, and was finalised in 2009 with the publication of ISO 80000-1.^[3]

The 14 parts of ISO/IEC 80000 define quantities used in scientific disciplines such as mechanics (e.g., pressure), light, acoustics (e.g., sound pressure), electromagnetism, information technology (e.g., storage capacity), chemistry, mathematics (e.g., Fourier transform), and physiology.

Base quantities

A base quantity is a physical quantity in a subset of a given system of quantities that is chosen by convention, where no quantity in the set can be expressed in terms of the others. The ISQ defines seven base quantities. The symbols for them, as for other quantities, are written in italics.^[4]

The dimension of a physical quantity does not include magnitude or units. The conventional symbolic representation of the dimension of a base quantity is a single upper-case letter in roman (upright) sans-serif^[5] type.

Base quantity	Symbol for quantity^[6]	Symbol for dimension	SI unit	SI unit symbol^[6]
length	$l$	${\mathsf {L}}$	metre	m
mass	$m$	${\mathsf {M}}$	kilogram	kg
time	$t$	${\mathsf {T}}$	second	s
electric current	$I$	${\mathsf {I}}$	ampere	A
thermodynamic temperature	$T$	${\mathsf {\Theta }}$	kelvin	K
amount of substance	$n$	${\mathsf {N}}$	mole	mol
luminous intensity	$I_{\text{v}}$	${\mathsf {J}}$	candela	cd

Derived quantities

A derived quantity is a quantity in a system of quantities that is a defined in terms of the base quantities of that system. The ISQ defines many derived quantities.

Dimensions of derived quantities

The conventional symbolic representation of the dimension of a derived quantity is the product of powers of the dimensions of the base quantities according to the definition of the derived quantity. The dimension of a quantity is denoted by ${\mathsf {L}}^{a}{\mathsf {M}}^{b}{\mathsf {T}}^{c}{\mathsf {I}}^{d}{\mathsf {\Theta }}^{e}{\mathsf {N}}^{f}{\mathsf {J}}^{g}$ , where the dimensional exponents are positive, negative, or zero. The symbol may be omitted if its exponent is zero. For example, in the ISQ, the quantity dimension of velocity is denoted ${\mathsf {LT}}^{-1}$ . The following table lists some quantities defined by the ISQ.

A quantity of dimension one is historically known as a dimensionless quantity (a term that is still commonly used); all its dimensional exponents are zero and its dimension symbol is $1$ . Such a quantity can be regarded as a derived quantity in the form of the ratio of two quantities of the same dimension.

Derived quantity	Symbol for dimension
plane angle	$1$
solid angle	$1$
frequency	${\mathsf {T}}^{-1}$
force	${\mathsf {LMT}}^{-2}$
pressure	${\mathsf {L}}^{-1}{\mathsf {MT}}^{-2}$
velocity	${\mathsf {LT}}^{-1}$
area	${\mathsf {L}}^{2}$
volume	${\mathsf {L}}^{3}$
acceleration	${\mathsf {LT}}^{-2}$

Logarithmic quantities

Level

While not included as a SI Unit in the International System of Quantities, several ratio measures are included by the International Committee for Weights and Measures (CIPM) as acceptable in the "non-SI unit" category. The level of a quantity is a logarithmic quantification of the ratio of the quantity with a stated reference value of that quantity. It is differently defined for a root-power quantity (also known by the deprecated term field quantity) and for a power quantity. It is not defined for ratios of quantities of other kinds.

The level of a root-power quantity ${\textstyle F}$ with reference to a reference value of the quantity ${\textstyle F_{0}}$ is defined as

L_{F}=\ln {\frac {F}{F_{0}}},

where $\ln$ is the natural logarithm. The level of a power quantity quantity ${\textstyle P}$ with reference to a reference value of the quantity ${\textstyle P_{0}}$ is defined as

L_{P}=\ln {\sqrt {\frac {P}{P_{0}}}}={\frac {1}{2}}\ln {\frac {P}{P_{0}}}.

When the natural logarithm is used, as it is here, use of the neper (symbol Np) is recommended, a unit of dimension 1 with Np = 1. The neper is coherent with SI. Use of the logarithm base 10 in association with a scaled unit, the bel (symbol B), where ${\textstyle {\text{B}}=({\frac {1}{2}}\ln 10){\text{ Np}}\approx {\text{1.151293 Np}}}$ .

An example of level is sound pressure level. Within the ISQ, all levels are treated as derived quantities of dimension 1 and thus are not approved SI units per se, but rather are included in Table 8 of non-SI units that are approved for use in Chapter 4 - Non-SI Units of the BIPM (https://www.bipm.org/en/publications/si-brochure/chapter4.html).

Information entropy

The ISQ recognizes another logarithmic quantity: information entropy, for which the coherent unit is the natural unit of information (symbol nat).

References

↑ "1.16". International vocabulary of metrology – Basic and general concepts and associated terms (VIM) (PDF) (3rd ed.). International Bureau of Weights and Measures (BIPM):Joint Committee for Guides in Metrology. 2012. Retrieved 28 March 2015.
↑ ISO 80000-1 Quantities and units. Part 1: General (1st ed.). Switzerland: ISO (the International Organization for Standardization). 2009-11-15. p. vi. Retrieved 23 May 2015.
↑ S. V. Gupta, Units of Measurement: Past, Present and Future. International System of Units, p. 16, Springer, 2009 ISBN 3-642-00738-4.
↑ ISO 80000-1:2009
↑ The status of the requirement for sans-serif is not as clear, since ISO 80000-1:2009 makes no mention of it ("The conventional symbolic representation of the dimension of a base quantity is a single upper case letter in roman (upright) type.") whereas the secondary source BIPM JCGM 200:2012 does ("The conventional symbolic representation of the dimension of a base quantity is a single upper case letter in roman (upright) sans-serif type.").
1 2 The associated symbol and SI unit are given here for reference only; they do not form part of the ISQ.