Turbo51

Turbo51 is a compiler for the programming language Pascal, for the Intel MCS-51 (8051) family of microcontrollers. It features Borland Turbo Pascal 7 syntax, support for inline assembly code, source-level debugging, and optimizations, among others. The compiler is written in Object Pascal and produced with Delphi.

Turbo51
Turbo51 command line output
Developer(s)Igor Funa
Stable release
0.1.3.12 / February 1, 2012 (2012-02-01)
Operating systemWin32
TypeCompiler
LicenseFreeware
Websiteturbo51.com

In the 1980s, Intel introduced the 8051 as the first member of the MCS-51 processor family. Today, hundreds of cheap derivatives are available from tens of manufacturers. This makes the architecture very interesting for professionals and hobbyists. It is surprising that this 8-bit architecture is still in use today, and is still so popular. Of all 8051 compilers, several widely used C compilers exist, but only a few Pascal compilers. Turbo51 is available as freeware and was created with the goal to make a Pascal compiler for MCS-51 processors that will be as fast as Turbo Pascal, will use the same syntax and will generate high quality optimized code.

Language dialect

Turbo51 uses Borland Turbo Pascal 7 dialect. The syntax was extended with some constructs to support specific features of MCS-51 processors.

Var   RS485_TX: Boolean absolute P3.2;
      I2C.SDA:   Boolean absolute P3.7;
      I2C.SCL:   Boolean absolute P3.4;

      EEPROM_Data:    TEEPROM_Data XDATA absolute 0;

      ModuleAddress:  Byte;
      RX_LedTimer:    Byte;
      TX_LedTimer:    Byte;

      SavedOutput:    TOutputData IDATA;
      OutputsAuxData: Array [1..8] of Byte IDATA;

Features

  • Win32 console application
  • Fast single pass optimizing compiler
  • Borland Turbo Pascal 7 syntax
  • Full floating point support
  • Mixed Pascal and assembly programming
  • Full use of register banks
  • Advanced multi-pass optimizer
  • Smart linker
  • Generates compact high quality code
  • Output formats: Binary, Intel HEX, OMF51 Object Module Format
  • Assembly source code generation

"Hello World" example

Program HelloWorld;

Const
 Osc      = 22118400;
 BaudRate = 19200;

 BaudRateTimerValue = Byte (- Osc div 12 div 32 div BaudRate);

Var SerialPort: Text;

Procedure WriteToSerialPort; Assembler;
Asm
  CLR   TI
  MOV   SBUF, A
@WaitLoop:
  JNB   TI, @WaitLoop
end;

Procedure Init;
begin
  TL1  := BaudRateTimerValue;
  TH1  := BaudRateTimerValue;
  TMOD := %00100001;    { Timer1: no GATE, 8 bit timer, autoreload }
  SCON := %01010000;    { Serial Mode 1, Enable Reception }
  TI   := True;         { Indicate TX ready }
  TR1  := True;         { Enable timer 1 }

  Assign (SerialPort, WriteToSerialPort)
end;

begin
  Init;
  Writeln (SerialPort, 'Hello world!')
end.

See also

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.