Tonic 23

The Tonic 23 is a French trailerable sailboat, that was designed by Philippe Harlé as a coastal cruising sailboat and first built in 1985.[1][2][3][4][5]

Tonic 23
Development
DesignerPhilippe Harlé
LocationFrance
Year1985
No. built750
Builder(s)Jeanneau
Boat
Boat weight2,932 lb (1,330 kg)
Draft4.5 ft (1.4 m)
Hull
TypeMonohull
ConstructionFiberglass
LOA24 ft (7.3 m)
LWL20.3 ft (6.2 m)
Beam8.1 ft (2.5 m)
Engine typeOutboard motor
Hull appendages
Keel/board typefin keel
Ballast1,058 lb (480 kg)
Rudder(s)transom-mounted rudder
Rig
Rig typeBermuda rig
I (foretriangle height)23.6 ft (7.2 m)
J (foretriangle base)7.9 ft (2.4 m)
P (mainsail luff)27.9 ft (8.5 m)
E (mainsail foot)10.0 ft (3.0 m)
Sails
SailplanFractional rigged sloop
Mainsail area157 sq ft (14.6 m2)
Jib/genoa area140 sq ft (13 m2)
Total sail area316 sq ft (29.4 m2)


Production

The design was built by Jeanneau in France from 1985 until 1992, but it is now out of production. During its production run about 750 boats were completed.[1][2]

Design

Tonic 23

The Tonic 23 is a small recreational keelboat, built predominantly of monolithic polyester fiberglass, with wood trim. The deck includes a balsawood core. It has a fractional sloop rig with a deck-stepped aluminium mast with a single set of swept-back spreaders, a raked stem, a vertical transom, a transom-hung rudder controlled by tiller and a fixed fin keel or optionally a stub keel and centerboard. The fixed keel version displaces 2,866 lb (1,300 kg) and carries 992 lb (450 kg) of cast iron ballast, while the stub keel and centerboard version displaces 2,932 lb (1,330 kg) and carries 1,058 lb (480 kg) of cast iron exterior ballast with the centerboard made from steel.[1][2][4][5]

The keel-equipped version of the boat has a draft of 3.67 ft (1.12 m), while the centerboard-equipped version has a draft of 4.50 ft (1.37 m) with the centerboard extended and 2.33 ft (0.71 m) with it retracted, allowing ground transportation on a trailer.[1][2][4][5]

For downwind sailing the boat can be equipped with a spinnaker of 364 sq ft (33.8 m2).[1][2]

The boat is normally fitted with a small outboard motor for docking and maneuvering or optionally an inboard motor could be installed. The design has a hull speed of 6.04 kn (11.19 km/h) and the fresh water tank has a capacity of 5.3 U.S. gallons (20 L; 4.4 imp gal)[1][2][3]

See also

Similar sailboats

References

  1. "Tonic 23 fin keel". boat-specs.com. 2018. Retrieved 30 September 2018.
  2. "Tonic 23 keel and centerboard". boat-specs.com. 2018. Retrieved 30 September 2018.
  3. "Jeanneau Tonic 23". yachtsnet.co.uk. Retrieved 30 September 2018.
  4. McArthur, Bruce (2019). "Tonic 23 (Jeanneau)". sailboatdata.com. Retrieved 29 July 2019.
  5. McArthur, Bruce (2019). "Tonic 23 CB (Jeanneau)". sailboatdata.com. Retrieved 29 July 2019.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.