Real-time locating system

The term RTLS was created (circa 1998) at the ID EXPO trade show by Tim Harrington (WhereNet), Jay Werb, (PinPoint), and Bert Moore, (Automatic Identification Manufacturers, Inc.(AIM)). It was created to describe and differentiate an emerging technology that not only provided the automatic identification capabilities of active RFID tags, but also added the ability to view the location on a computer screen. It was at this show that the first examples of a commercial radio based RTLS system were shown by PinPoint and WhereNet. Although this capability had been utilized previously by military and government agencies, the technology had been too expensive for commercial purposes. In the early 1990s, the first commercial RTLS were installed at three healthcare facilities in the United States, and were based on the transmission and decoding of infrared light signals from actively transmitting tags. Since then, new technology has emerged that also enables RTLS to be applied to passive tag applications.

RTLS are generally used in indoor and/or confined areas, such as buildings, and do not provide global coverage like GPS. RTLS tags are affixed to mobile items to be tracked or managed. RTLS reference points, which can be either transmitters or receivers, are spaced throughout a building (or similar area of interest) to provide the desired tag coverage. In most cases, the more RTLS reference points that are installed, the better the location accuracy, until the technology limitations are reached.

A number of disparate system designs are all referred to as "real-time locating systems", but there are two primary system design elements:

RTLS can be used numerous logistical or operational areas such as:

• locate and manage assets within a facility, such as finding a misplaced tool cart in a warehouse or medical equipment
• notification of new locations, such as an alert if a tool cart improperly has left the facility
• to combine identity of multiple items placed in a single location, such as on a pallet
• to locate customers, for example in a restaurant, for delivery of food or service
• to maintain proper staffing levels of operational areas, such as ensuring guards are in the proper locations in a correctional facility
• to quickly and automatically account for all staff after or during an emergency evacuation
  • Toronto General Hospital is looking at RTLS to reduce quarantine times after an infectious disease outbreak.[3] After a recent SARS outbreak, 1% of all staff were quarantined, and more accurate data regarding who had been exposed to the virus could have reduced the need for quarantines.[3]
• to automatically track and time stamp the progress of people or assets through a process, such as following a patient's emergency room wait time, time spent in the operating room, and total time until discharge. Such a system can be used for process improvement
• clinical-grade locating to support acute care capacity management

RTLS may be seen as a threat to privacy when used to determine the location of people. The newly declared human right of informational self-determination gives the right to prevent one's identity and personal data from being disclosed to others, and also covers disclosure of locality, though this does not generally apply to the workplace.

Several prominent labor unions have come out against the use of RTLS systems to track workers calling them "the beginning of Big Brother" and "an invasion of privacy".[4]

There is a wide variety of systems concepts and designs to provide real-time locating.[5]

• Active radio frequency identification (Active RFID)
• Active radio frequency identification - infrared hybrid (Active RFID-IR)
• Infrared (IR)
• Optical locating[6][7]
• Low-frequency signpost identification
• Semi-active radio frequency identification (semi-active RFID)
• Passive RFID RTLS locating via Steerable Phased Array Antennae[8]
• Radio beacon,[9][9]
• Ultrasound Identification (US-ID)[10]
• Ultrasonic ranging (US-RTLS)[11]
• Ultra-wideband (UWB)[12]
• Wide-over-narrow band[13]
• Wireless Local Area Network (WLAN, Wi-Fi)[14]
• Bluetooth,[15][16]
• Clustering in noisy ambience,[17][18]
• Bivalent systems[19]

A general model for selection of the best solution for a locating problem has been constructed at the Radboud University of Nijmegen.[20] Many of these references do not comply with the definitions given in international standardization with ISO/IEC 19762-5[21] and ISO/IEC 24730-1.[22] However, some aspects of real-time performance are served and aspects of locating are addressed in context of absolute coordinates.

Depending on the physical technology used, at least one and often some combination of ranging and/or angulating methods are used to determine location:

• Angle of Arrival (AoA)
• Angle of Departure (AoD) (e.g. Bluetooth Direction Finding[23], features a mobile-centric RTLS architecture[24])
• Line-of-sight (LoS)
• Time of arrival (ToA)
• Multilateration (Time difference of arrival) (TDoA)
• Time-of-flight (ToF)
• Two-way ranging (TWR) according to Nanotron’s patents
• Symmetrical Double Sided – Two Way Ranging (SDS-TWR)
• Near-field electromagnetic ranging (NFER)

Real-time locating is affected by a variety of errors. Many of the major reasons relate to the physics of the locating system, and may not be reduced by improving the technical equipment.

None or no direct response

Many RTLS systems require direct and clear line of sight visibility. For those systems, where there is no visibility from mobile tags to fixed nodes there will be no result or a non valid result from locating engine. This applies to satellite locating as well as other RTLS systems such as angle of arrival and time of arrival. Fingerprinting is a way to overcome the visibility issue: If the locations in the tracking area contain distinct measurement fingerprints, line of sight is not necessarily needed. For example, if each location contains a unique combination of signal strength readings from transmitters, the location system will function properly. This is true, for example, with some Wi-Fi based RTLS solutions. However, having distinct signal strength fingerprints in each location typically requires a fairly high saturation of transmitters.

False location

The measured location may appear entirely faulty. This is a generally result of simple operational models to compensate for the plurality of error sources. It proves impossible to serve proper location after ignoring the errors.

Locating backlog

Real time is no registered branding and has no inherent quality. A variety of offers sails under this term. As motion causes location changes, inevitably the latency time to compute a new location may be dominant with regard to motion. Either an RTLS system that requires waiting for new results is not worth the money or the operational concept that asks for faster location updates does not comply with the chosen systems approach.

Temporary location error

Location will never be reported exactly, as the term real-time and the term precision directly contradict in aspects of measurement theory as well as the term precision and the term cost contradict in aspects of economy. That is no exclusion of precision, but the limitations with higher speed are inevitable.

Steady location error

Recognizing a reported location steadily apart from physical presence generally indicates the problem of insufficient over-determination and missing of visibility along at least one link from resident anchors to mobile transponders. Such effect is caused also by insufficient concepts to compensate for calibration needs.

Location jitter

Noise from various sources has an erratic influence on stability of results. The aim to provide a steady appearance increases the latency contradicting to real time requirements.

Location jump

As objects containing mass have limitations to jump, such effects are mostly beyond physical reality. Jumps of reported location not visible with the object itself generally indicate improper modeling with the location engine. Such effect is caused by changing dominance of various secondary responses.

Location creep

Location of residing objects gets reported moving, as soon as the measures taken are biased by secondary path reflections with increasing weight over time. Such effect is caused by simple averaging and the effect indicates insufficient discrimination of first echoes.

In RTLS application in the Healthcare industry, various studies were issued discussing the limitations of the currently adopted RTLS. Currently used technologies RFID, Wi-fi, UWB, all RFID based are hazardous in the sense of interference with sensitive equipment. A study carried out by Dr Erik Jan van Lieshout of the Academic Medical Centre of the University of Amsterdam published in JAMA (Journal of the American Medical Equipment)[25] claimed "RFID and UWB could shut down equipment patients rely on" as "RFID caused interference in 34 of the 123 tests they performed". The first Bluetooth RTLS provider in the medical industry is supporting this in their article: "The fact that RFID cannot be used near sensitive equipment should in itself be a red flag to the medical industry".[26] The RFID Journal responded to this study not negating it rather explaining real-case solution: "The Purdue study showed no effect when ultrahigh-frequency (UHF) systems were kept at a reasonable distance from medical equipment. So placing readers in utility rooms, near elevators and above doors between hospital wings or departments to track assets is not a problem".[27] However the case of ”keeping at a reasonable distance” might be still an open question for the RTLS technology adopters and providers in medical facilities.

In many applications it is very difficult and at the same time important to make a proper choice among various communication technologies (e.g., RFID, WiFi, etc.) which RTLS may include. Wrong design decision made at early stages can lead to catastrophic results for the system and a significant loss of money for fixing and redesign. To solve this problem a special methodology for RTLS design space exploration was developed. It consists of such steps as modelling, requirements specification and verification into a single efficient process.[28]

• Context awareness
• Indoor positioning system
• Location awareness
• Positioning technologies
• Track and trace
• Vehicle tracking system
• Wireless triangulation

• Malik, Ajay (2009). RTLS For Dummies. Wiley. p. 384. ISBN 978-0-470-39868-5.
• Indoor Geolocation Using Wireless Local Area Networks (Berichte Aus Der Informatik), Michael Wallbaum (2006)
• Local Positioning Systems: LBS applications and services, Krzysztof Kolodziej & Hjelm Johan, CRC Press Inc (2006)