List of floppy disk formats

8-inch, ​5 1⁄4-inch, and ​3 1⁄2-inch floppy disks

This is a list of different floppy disk formats.

IBM 8-inch formats

This is a list of 8-inch floppy diskette formats as introduced by IBM.

Category Drive designation 23FD 33FD 43FD 53FD
Media designation N/A (read only) Type 1 Type 2 Type 2D
App. size 80 KB 242 KB 284 KB 303 KB 492 KB 568 KB 985 KB 1,136 KB 1,212 KB
Drive Heads (sides) 1 1 1 1 2 2 2 2 2
Spindle motor
speed (rpm)		 90 360 360 360 360 360 360 360 360
Controller Transfer rate (kbit/s) 33.333 250 250 250 250 250 500 500 500
Encoding FM FM FM FM FM FM MFM MFM MFM
Media Track density (tpi) 32 48 48 48 48 48 48 48 48
Bit density (bpi) 1,594 3,268 3,268 3,268 3,408 3,408 6,816 6,816 6,816
Density designation SS SD SS SD SS SD SS SD DS SD DS SD DS DD DS DD DS DD
Geometry of the
index cylinder (0)		 Sectors N/A 26 26 26 26 26 26 26
Sector size (bytes) 128 128 128 128 (side 0:128
1:256)		 (side 0:128
1:256)		 (side 0:128
1:256)
Size (bytes) N/A N/A 3,328 3,328 6,656 6,656 9,984 9,984 9,984
Geometry of
remaining cylinders		 Usable cylinders 32 73 74 74 74 74 74 74 74
Sectors per track 8 26 15 8 26 15 26 15 8
Sector size (bytes) 319 128 256 512 128 256 256 512 1024
Number of sectors 256 1,898 1,110 592 3,848 2,220 3,848 2,220 1,184
Capacity Formatted (bytes) 81,664 242,944 284,160 303,104 492,544 568,320 985,088 1,136,640 1,212,416
Formatted (KB) 79.75 237.25 277.5 296 481 555 962 1,110 1,184
SS = Single Sided; DS = Double Sided; SD = Single Density; DD = Double Density; N/A = Not Applicable; tpi = Tracks per inch; bpi = Bits per inch

DEC 8-inch formats

Digital Equipment Corporation used the following formats on 8-inch disks:

Category Drive designation DEC RX01 DEC RX02
App. size 250 KB 500 KB
Drive Heads (data surfaces) 1 1
Spindle motor speed (rpm) 360 360
Controller Transfer rate (kbit/s) 250 500
Encoding FM FM/MFM
Media Track density (tpi) 48 48
Bit density (bpi) 3,200 6,400
Density designation SS SD SS DD
Geometry Cylinders 77 77
Sectors per track 26 26
Total sectors per disk 2,002 2,002
Sector size (bytes) 128 256
Capacity Formatted (bytes) 256,256 512,512
Formatted (KB) 250.25 500.5
SS = Single Sided; SD = Single Density; DD = Double Density; tpi = Tracks per inch; bpi = Bits per inch

Note: "RX02 8-inch Floppy Drive Information". David Gesswein. Retrieved 2007-09-21.

The RX02 mode is not compatible with other standard drives since the headers are always in single density mode but the data is written in double density mode. Also in double density mode the standard MFM encoding was modified from the standard to prevent false header detection in data.

Other manufacturers
Disk Form factor[NB 1] Year introduced Formatted
Storage capacity
(in KB = 1024 bytes if not stated)		 Marketed
capacity¹
IBM 23FD[1] 8-inch 1971 79.75 ?
Memorex 650[2] 8-inch 1972 175 1.5 megabit[2] unformatted
Memorex 651[3] 8-inch 1972 264 2.5 megabit[3] unformatted
IBM 33FD / Shugart 901 8-inch - SSSD 1973 237.25[4][5] 3.1 Mbits unformatted
IBM 43FD / Shugart 850 8-inch - DSSD 1976 500.5[6] 6.2 Mbits unformatted
Shugart SA 400 5​1⁄4-inch (35 track) 1976[7] 87.5[8] 110 KB
IBM 53FD / Shugart 850 8-inch DSDD 1977 980 (CP/M)
- 1200 (FAT)		 1.2 MB
5​1⁄4-inch DD 1978 360 or 800 360 KB
HP single sided 3​1⁄2-inch 1982 280 264 KB
3-inch 1982 360 ?
3​1⁄2-inch DD 1984 720 720 KB
5​1⁄4-inch QD 720 720 KB
5​1⁄4-inch HD 1982 YE Data YD380[9] 1200 1.2 MB
3-inch DD 1984 720 ?
Mitsumi Quick Disk 3-inch 1985 128 to 256 ?
5​1⁄4-inch Perpendicular 1986 100 MB ?
3​1⁄2-inch HD 1987 1440 1.44 MB (2 MB unformatted)
3​1⁄2-inch ED 1987[10] 2880 2.88 MB (4 MB unformatted)
2TD drive in NEC PC-88 VA3 3​1⁄2-inch TD 1988 ca. 9.3 MB 12.5 MB[11] (13 MB unformatted)[12]
Fujifilm LT-1 in Zenith Minisport 2-inch 1989 ? 720 KB (245 tpi, 80 tracks/side, double-sided, double-density)
Flextra BR3020 3​1⁄2-inch 1990 21040 KB 21.4 MB (25 MB unformatted), double-sided, 526 cylinders × 40 sectors × 512 bytes
Floptical 3​1⁄2-inch 1990 20385? 21 MB,DS, 755 cylinders x 27 sectors per side x 512 bytes
Flextra BR3225 3​1⁄2-inch 1992? ? 50 MB unformatted, double-sided
LS-120 3​1⁄2-inch 1996 120.375 MB 120 MB, 1736 cylinders, 51-93 sectors, 26K to 47KB/track,
UHD144 3​1⁄2-inch 1997/1998 144 MB 144 MB, 1960 cylinders, 50-90 sectors, RLL, 281,504 sectors
HiFD 150 3​1⁄2-inch 1998 150 MB 150 MB
HiFD 200 3​1⁄2-inch 1999 200 MB 200 MB
LS-240[13] 3​1⁄2-inch 2000/2001 240.75 MB 240 MB
Abbreviations: DD = Double Density; QD = Quad Density; HD = High Density; ED = Extra-high Density; TD = Triple Density;

LS = Laser Servo; HiFD = High capacity Floppy Disk; SS = Single Sided; DS = Double Sided

The formatted capacities of floppy disks is less than the unformatted capacity, which does not include the sector and track headings required for use of the disk. The amount of capacity lost to this overhead depends on the application of the drive and is beyond the manufacturer's control. Mixtures of decimal SI-style prefixes and binary record lengths required care to properly calculate total capacity. Unlike semiconductor memory, which doubled in size each time an address pin was added to an integrated circuit package and so naturally favored counts that were powers of two, the capacity of a disk drive was the product of the sector size, number of sectors per track, number of tracks per side, (and in hard drives, the number of disk platters in the drive). Individual formatted sector lengths are arbitrarily set as powers of 2 (256 bytes, 512 bytes, etc.), and disk capacity is naturally calculated as multiples of the sector size. This led to an impure combination of decimal multiples of sectors and binary sector sizes. The "1.44 MB" value for the 3​1⁄2-inch HD floppies is the most widely known example; where the "M" prefix is peculiar to the context of the disk drive and represents neither a decimal million nor a mebibyte 2 ^20. See Ultimate capacity and speed.

Dates and capacities marked ? are of unclear origin and need source information; other listed capacities refer to:

Formatted Storage Capacity is total size of all sectors on the disk. Marketed Capacity is the capacity, typically unformatted, by the original media OEM vendor or in the case of IBM media, the first OEM thereafter. Other formats may get more or less capacity from the same drives and disks.

Physical composition
Floppy disk physical characteristics
(capacity and tracks are nominal, per side)
SizeDensityTrackstpibpiCoercivityUnformatted capacity per side
2​1⁄2-inch[14][15]Single16[14][15]48[14]64 KB[14][15]
3​1⁄2-inchDouble[16]40[16]67.5[16]8650[16]600 Oe250 KB
801358717600-665 Oe500 KB
High8013517434720-750 Oe1000 KB
Extended8013534868900 Oe2000 KB
Triple[12]240[11]406.5[11]36700[11]6500 KB
5​1⁄4-inchSingle/Double40485876300 Oe250 KB
Double8062.5(Apple FileWare)
Quad77100300 Oe500 KB (Micropolis-compatible)
Quad80965922300 Oe500 KB
High80969646600 Oe833 KB
8-inchSingle/Double7748300 Oe1000 KB

Logical formats

Throughout the 1970s and 1980s, many different logical disk formats were used, depending on the hardware platform.

Common floppy disk formats, logical characteristics by platform
PlatformSizeDensityBytes/ sectorSectors/ trackTracks/ sideSidesCapacityrpmEncodingNote
Acorn 5​1⁄4-inch Single 256 10 40 1 100 KB 300 FM
80 200 KB
Double 256 16 40 1 160 KB MFM
80 320 KB
2 640 KB
3​1⁄2-inch (90 mm) Double 256 16 80 2 640 KB 300 MFM
1024 5 800 KB
High 10 1600 KB
Agat 5​1⁄4-inch Double 256 21 80 2 840 KB 300 MFM [NB 2]
Amstrad CPC/PCW 3-inch Single 512 9 40 1 180 KB 300 MFM Single head drive, but double sided floppy discs (total of 360Kb per floppy)
Amstrad PCW8512/9512 3-inch Double 512 9 80 2 720 KB 300 MFM 720 KB mode uses both sides - ensure disc inserted correct way up.
Apple II 5​1⁄4-inch Double 256 13 35 1 113.75 KB 300 GCR [17]
16 1 140 KB
3​1⁄2-inch (90 mm) Double 512 Variable (8-12) 80 1 400 KB 394 - 590 GCR [NB 3]
2 800 KB
High 512 18 80 2 1440 KB 300 MFM [NB 4]
Apple Lisa 5​1⁄4-inch FileWare Double 512 Variable (15-22) 46 2 851 KB 218 - 320 GCR
Apple Lisa 2/Macintosh XL 3​1⁄2-inch (90 mm) Double 512 Variable (8-12) 80 1 400 KB 394 - 590 GCR
Apple Macintosh 2 800 KB
High 512 18 80 2 1440 KB 300 MFM
Atari 8-bit 5​1⁄4-inch Single 128 18 40 1 90 KB 288 FM [NB 5]
Enhanced 128 26 130 KB MFM
Double 256 18 180 KB
Atari ST/TT/Falcon 3​1⁄2-inch (90 mm) Double 512 9 80 1 360 KB 300 MFM
2 720 KB
High 18 1440 KB
Coleco ADAM 5​1⁄4-inch Double 512 8 40 1 160 KB 300 MFM
Commodore (8-bit) 5​1⁄4-inch Double 256 Variable (17-21) ZCAV 35 1 170 KB 300 GCR [NB 6]
2 340 KB
Quad Variable (23-29) ZCAV 77 1 521 KB
2 1042 KB
3​1⁄2-inch (90 mm) Double 512 10 80 2 800 KB MFM  
Commodore Amiga 5​1⁄4-inch Double 512 11 40 2 440 KB[NB 7] 300 MFM [NB 8]
Quad 80 880 KB[NB 9]
3​1⁄2-inch (90 mm) Double 880 KB
High 19 1520 KB GCR [NB 10]
22 1760 KB 150 MFM [NB 8]
IBM 3740 8-inch Single 128 26 73 1 237.25 KB 360 FM [NB 11]
DEC RX50 5​1⁄4-inch Double 512 10 80 1 400 KB 300 MFM
IBM PC compatibles[18] 8-inch Single 128 26 77 1 250.25 KB[NB 12][19][20][21] 360 MFM [NB 13]
2 500.5 KB[NB 12][22][20][21]
Double 1024 8 1 616 KB[NB 12][20][21]
2 1232 KB[NB 12][22][20][21]
5​1⁄4-inch Double 512 8 40 1 160 KB[NB 12] 300 MFM  
2 320 KB[NB 12]
9 1 180 KB[NB 12]
2 360 KB[NB 12]
Quad[NB 14] 8 80 1 320 KB[NB 12] 300
2 640 KB[NB 12]
High 15 80 2 1200 KB[NB 12] 360
3​1⁄2-inch (90 mm) Double 512 8 80 1 320 KB[NB 12] 300 MFM
9 360 KB[NB 12]
8 2 640 KB[NB 12]
9 720 KB[NB 12]
High 18 1440 KB[NB 12]
21 1680 KB[NB 12] DMF[NB 15]
82 1720 KB[NB 12]
Extended 36 80 2880 KB[NB 12]
MGT SAM Coupé 3​1⁄2-inch (90 mm) Double 512 10 80 2 800 KB 300 MFM  
NEC PC98 8-inch Single 128 26 77 1 250.25 KB[NB 12] 360 FM  
Double 1024 8 77 2 1232 KB[NB 12] MFM
5​1⁄4-inch Double 512 8 80 2 640 KB[NB 12] 360 MFM
9 720 KB[NB 12]
High 15 1200 KiB[NB 12]
1024 8 77 (80)[NB 16] 1232 (1280) KB[NB 12][NB 16] [NB 16]
3​1⁄2-inch (90 mm) Double 512 8 80 2 640 KB[NB 12] 360 MFM
9 720 KB[NB 12]
High 15 1200 KB[NB 12] 3-mode[NB 17][NB 16]
1024 8 77 (80)[NB 16] 1232 (1280) KB[NB 12][NB 16]
512 18 80 1440 KB[NB 12] 300
Triple 512 38 240 9120 KB 360 NEC PC-88 VA3 2TD drive only[11][12]
Osborne 1[23] 5​1⁄4-inch Single 256 10 40 1 100 KB 300 FM
Double 1024 200 KB MFM
Sega SF-7000 3-inch Single 256 16 40 2 160 KiB ? ? Expansion unit for SC-3000 home computer. Capacity is per side.

[24]

SHARP X68000 5​1⁄4-inch High 1024 8 77 2 1232 KB[NB 12] 360 MFM  
3​1⁄2-inch (90 mm)
SHARP CE-1600F,[14] CE-140F[15] 2​1⁄2-inch (63.5 mm)[14][15] Single (250 kbit/s, 48 tpi[14]) 512[14][15] 8[14][15] 16 (tracks 00..15)[14][15] drive: 1, diskette: 2 (turnable)[14][15] 2× 64 KB[14][15] 270[14] GCR (4/5)[14][15] Internally based on FDU-250 Micro Floppy Disk Drive Unit[14]
Thomson 5​1⁄4-inch Single 128 16 40 1 80 KB 300 FM Thomson UD90.070
Double 256 2 320 KB MFM Thomson DD90-320[NB 18]
3​1⁄2-inch (90 mm) Double 256 16 80 1 320 KB 300 MFM Thomson TO9, Thomson DD09-350
Double 2 640 KB Thomson TO8D, TO9+, Thomson DD90-352[NB 19]

See also

Notes
  1. Floppy disk sizes are almost universally referred to in inch measurements, even in countries where metric is the standard, and even when the size is in fact defined in SI; for instance, the 3​1⁄2-inch floppy is defined as 90 mm.
  2. Custom controller with unique track layout.
  3. Apple II double-density 3​1⁄2-inch (90 mm) drives use variable sectors sizes (tracks 00-15: 12 sectors, tracks 16-31: 11 sectors, tracks 32-47: 10 sectors, tracks 48-63: 9 sectors, tracks 64-79: 8 sectors), 394 rpm to 590 rpm.
  4. Apple II high-density 3​1⁄2-inch (90 mm) drives require a compatible disk controller and ProDOS 8.
  5. Atari XF551 uses 360 KB, 300 rpm, MFM, Double Side/Double Density.
  6. Commodore floppy drives used a fixed rotation speed with variable sector density (see: Zone bit recording).
  7. This format was used by the Amiga 1020 external floppy drive and some third-party drives connected to the normal Amiga floppy drive bus.
  8. Though the Amiga used MFM, the format places sectors too close together for a standard IBM PC compatible floppy disk controller to read (appearing as one 5632-byte physical sector per track).
  9. Format used by rare third-party drives with quad density disks; such drives were usually switchable between 80-track and 40-track (A1520/PC-compatible) operation.
  10. Format used by third-party gcrdisk.device driver in order to use PC-standard HD floppy drives (which rotated at a fixed 300 rpm) via the Amiga floppy drive bus. The Amiga's floppy controller could not keep up with the data rate needed for MFM recording on HD floppies without reducing rotational speed, so the third party driver used an alternate GCR mode.
  11. They have 73 data tracks, 1 index track, 2 spare tracks, 1 reserved track.
  12. The calculated formatted capacity is based on FAT12 format.
  13. While IBM didn't include an 8-inch floppy drive option on any of their PCs and PC DOS, MS-DOS 1.25 supported 8-inch disks and added support for higher capacities in version 2.0. MS-DOS' predecessor 86-DOS used 8-inch diskettes as well.
  14. Rare format appearing on some early PC/XT clones using quad-density disks.
  15. These variations are known as DMF diskettes, used for a time to pack more data on to each disk for software distribution.
  16. Inner 3 tracks of 8 sectors/track format are unused.
  17. The PC98 3​1⁄2-inch (90 mm) formats are also known as "3 Mode" floppy disks, usable on IBM PC compatibles with a 3-mode floppy drive.
  18. The two sides are managed as two independent 160 KB disks
  19. The two sides are managed as two independent 320 KB disks

References
  1. Engh, James T. (September 1981). "The IBM Diskette and Diskette Drive" (PDF). IBM Journal of Research and Development. 25 (5): 701–710. doi:10.1147/rd.255.0701. Archived (PDF) from the original on 2006-09-08. Retrieved 2008-07-14.
  2. Memorex 650 Flexible Disc File OEM Manual
  3. Memorex 651 Flexible Disc File OEM Manual
  4. The IBM Diskette and Diskette Drive, James T. Engh, 1981 - "The user capacity of the diskette was established at 242 944 bytes on 73 tracks with 26 sectors on each track."
  5. The Evolution of Magnetic Storage, L. D. Stevens, 1981 - "This drive, with a capacity of 243 Kbytes"
  6. The IBM Diskette and Diskette Drive, James T. Engh, 1981 - "This would double the capacity to approximately 0.5 megabytes (Mbytes)."
  7. Sollman, George (July 1978). "Evolution of the Minifloppy Product Family". IEEE Transactions on Magnetics. 14 (4): 160–166. doi:10.1109/TMAG.1978.1059748. "In September, 1976, the first minifloppy disk drive was introduced by Shugart Associates."
  8. Shugart SA 400 Datasheet Formatted with 256 byte sectors and 10 sectors per track the capacity is 89.6 Kbytes (256 x 10 x 35 = 89,600), or 87.5 KB
  9. per 1986 Disk/Trend Report, Flexible Disk Drives
  10. Mueller, Scott: "Upgrading and Repairing PCs", p. 656, Que Publishing, 2002.
  11. http://www.pc88.gr.jp/va/va-hard.html
  12. NEC μPD72070 - Floppy Disk Controller Specification Version 2.0 (PDF). 2.0 preliminary. NEC Corporation. October 1991. Archived from the original (PDF) on 2017-03-20. Retrieved 2017-03-20.
  13. https://www.theregister.co.uk/2000/10/23/32mb_on_a_humble_floppy/
  14. "Model CE-1600F". Sharp PC-1600 Service Manual (PDF). Yamatokoriyama, Japan: Sharp Corporation, Information Systems Group, Quality & Reliability Control Center. July 1986. pp. 98–104. Archived (PDF) from the original on 2017-03-23. Retrieved 2017-03-23.
  15. Sharp Service Manual Model CE-140F Pocket Disk Drive (PDF). Sharp Corporation. 00ZCE140F/SME. Archived (PDF) from the original on 2017-03-11. Retrieved 2017-03-11.
  16. http://electrickery.xs4all.nl/comp/px8/doc/PF-10Manual.pdf Epson PF-10 Manual for PX-8
  17. 16 sector filesystems require a compatible disk controller (PROM update) and Apple DOS 3.3 or later.
  18. Standard Floppy Disk Formats Supported by MS-DOS
  19. "Standard Floppy Disk Formats Supported by MS-DOS". 2.0. Microsoft Help and Support. 2000-12-17. Retrieved 2020-02-05.
  20. Zbikowski, Mark; Allen, Paul; Ballmer, Steve; Borman, Reuben; Borman, Rob; Butler, John; Carroll, Chuck; Chamberlain, Mark; Chell, David; Colee, Mike; Courtney, Mike; Dryfoos, Mike; Duncan, Rachel; Eckhardt, Kurt; Evans, Eric; Farmer, Rick; Gates, Bill; Geary, Michael; Griffin, Bob; Hogarth, Doug; Johnson, James W.; Kermaani, Kaamel; King, Adrian; Koch, Reed; Landowski, James; Larson, Chris; Lennon, Thomas; Lipkie, Dan; McDonald, Marc; McKinney, Bruce; Martin, Pascal; Mathers, Estelle; Matthews, Bob; Melin, David; Mergentime, Charles; Nevin, Randy; Newell, Dan; Newell, Tani; Norris, David; O'Leary, Mike; O'Rear, Bob; Olsson, Mike; Osterman, Larry; Ostling, Ridge; Pai, Sunil; Paterson, Tim; Perez, Gary; Peters, Chris; Petzold, Charles; Pollock, John; Reynolds, Aaron; Rubin, Darryl; Ryan, Ralph; Schulmeisters, Karl; Shah, Rajen; Shaw, Barry; Short, Anthony; Slivka, Ben; Smirl, Jon; Stillmaker, Betty; Stoddard, John; Tillman, Dennis; Whitten, Greg; Yount, Natalie; Zeck, Steve (1988). "Technical advisors". The MS-DOS Encyclopedia: versions 1.0 through 3.2. By Duncan, Ray; Bostwick, Steve; Burgoyne, Keith; Byers, Robert A.; Hogan, Thom; Kyle, Jim; Letwin, Gordon; Petzold, Charles; Rabinowitz, Chip; Tomlin, Jim; Wilton, Richard; Wolverton, Van; Wong, William; Woodcock, JoAnne (Completely reworked ed.). Redmond, Washington, USA: Microsoft Press. ISBN 1-55615-049-0. LCCN 87-21452. OCLC 16581341. (xix+1570 pages; 26 cm) (NB. This edition was published in 1988 after extensive rework of the withdrawn 1986 first edition by a different team of authors. )
  21. Xerox (1983-11). Xerox 16/8 Professional Computer - MS-DOS OS Handbook for 8" Floppy Disks. 1983-11, MS-DOS 2.0 ()
  22. "Standard Floppy Disk Formats Supported by MS-DOS". 2.0. Microsoft Help and Support. 2003-05-12. Retrieved 2012-09-11.
  23. Thom Hogan, Mike Iannamico, Osborne 1 Technical Manual, Osborne Computer Corporation, 1982, page 39
  24. "Sega SF-7000 Super Control Station User Guide". Sega Enterprises Ltd. Retrieved 2020-02-10.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.