Lewis and Clark Bridge (Columbia River)

The Lewis and Clark Bridge is a cantilever bridge that spans the Columbia River between Longview, Washington and Rainier, Oregon. At the time of completion, it had the longest cantilever span in the United States.[1]

The construction of the bridge, 1930

Lewis and Clark Bridge
Coordinates	46°06′17″N 122°57′42″W
Carries	SR 433[1]
Crosses	Columbia River
Locale	Longview, Washington to Rainier, Oregon
Maintained by	Washington State DOT
Characteristics
Design	Cantilever through-truss
Total length	2,722 feet (830 m)[1]
Longest span	1,200 ft (366 m)[1]
History
Designer	Joseph Strauss
Opened	March 29, 1930
Longview Bridge
U.S. National Register of Historic Places
Location	Spans Columbia River, Longview, Washington
Coordinates	46°6′16.8″N 122°57′42.6″W
Area	7.2 acres (2.9 ha)
Built	1929–30
Built by	J.H. Pomeroy & Co.
Architect	Strauss Engineering Corp.
Architectural style	cantilever bridge
MPS	Historic Bridges/Tunnels in Washington State TR
NRHP reference No.	82004208[2]
Added to NRHP	July 16, 1982

The bridge was opened on March 29, 1930, as a privately owned bridge named the Longview Bridge. The $5.8 million cost was recovered by tolls, $1.00 for cars and $.10 for pedestrians. At the time it was the longest and highest cantilever bridge in the United States. The state of Washington purchased the bridge in 1947 and the tolls were removed in 1965 after the bridge was paid for. In 1980, the bridge was rededicated as the Lewis and Clark Bridge in honor of the Lewis and Clark Expedition. The deck was replaced in 2003–04 at a cost of $29.2 million.

The bridge is 8,288 ft (2.5 km) long with 210 ft (64 m) of vertical clearance. The main span is 1,200 ft (366 m) long and the top of the bridge is 340 ft (104 m) above the river. It was designed by Joseph Strauss, engineer of the Golden Gate Bridge.

In 1982, the bridge was entered on the National Register of Historic Places, as the Longview Bridge.[3]