Lamb vector

In fluid dynamics, Lamb vector is the cross product of vorticity vector and velocity vector of the flow field, named after the physicist Horace Lamb[1][2][3][4][5]. The Lamb vector is defined as

\mathbf {l} ={\boldsymbol {\omega }}\times \mathbf {u}

where $\mathbf {u}$ is the velocity field and ${\boldsymbol {\omega }}=\nabla \times \mathbf {u}$ is the vorticity field of the flow. It appears in the Navier–Stokes equations through the material derivative term, specifically via convective acceleration term,

\mathbf {u} \cdot \nabla \mathbf {u} ={\boldsymbol {\omega }}\times \mathbf {u} +{\frac {1}{2}}\nabla \mathbf {u} ^{2}=\mathbf {l} +{\frac {1}{2}}\nabla \mathbf {u} ^{2}.

In irrotational flow, Lamb vector is zero, as in Beltrami flow. The concept of Lamb vector is widely used in turbulent flows. The Lamb vector is analogous to electric field, when the Navier–Stokes equation is compared with Maxwell's equations.

Properties of Lamb vector

The divergence of the lamb vector can be derived from vector identities,

\nabla \cdot \mathbf {l} =\mathbf {u} \cdot \nabla \times {\boldsymbol {\omega }}-{\boldsymbol {\omega }}\cdot {\boldsymbol {\omega }}.

At the same time, the divergence can also be obtained from Navier–Stokes equation by taking its divergence. In particular, for incompressible flow, where $\nabla \cdot \mathbf {u} =0$ , with body forces given by $-\nabla U$ , the Lamb vector divergence reduces to

\nabla \cdot \mathbf {l} =-\nabla ^{2}\Phi ,

where

\Phi ={\frac {p}{\rho }}+{\frac {1}{2}}\mathbf {u} ^{2}+U.

In regions where $\nabla \cdot \mathbf {l} \geq 0$ , there is tendency for $\Phi$ to accumulate there and vice versa.

References

Lamb, H. (1932). Hydrodynamics, Cambridge Univ. Press,, 134–139.
Truesdell, C. (1954). The kinematics of vorticity (Vol. 954). Bloomington: Indiana University Press.
Sposito, G. (1997). On steady flows with Lamb surfaces. International journal of engineering science, 35(3), 197–209.
Hamman, C. W., Klewicki, J. C., & Kirby, R. M. (2008). On the Lamb vector divergence in Navier–Stokes flows. Journal of Fluid Mechanics, 610, 261–284.
Marmanis, H. (1998). Analogy between the Navier–Stokes equations and Maxwell’s equations: Application to turbulence. Physics of fluids, 10(6), 1428–1437.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[1] Lamb, H. (1932). Hydrodynamics, Cambridge Univ. Press,, 134–139.

[2] Truesdell, C. (1954). The kinematics of vorticity (Vol. 954). Bloomington: Indiana University Press.

[3] Sposito, G. (1997). On steady flows with Lamb surfaces. International journal of engineering science, 35(3), 197–209.

[4] Hamman, C. W., Klewicki, J. C., & Kirby, R. M. (2008). On the Lamb vector divergence in Navier–Stokes flows. Journal of Fluid Mechanics, 610, 261–284.

[5] Marmanis, H. (1998). Analogy between the Navier–Stokes equations and Maxwell’s equations: Application to turbulence. Physics of fluids, 10(6), 1428–1437.