Indoor rower

Chabrias, an Athenian admiral of the 4th century BC, introduced the first rowing machines as supplemental military training devices. "To train inexperienced oarsmen, Chabrias built wooden rowing frames on shore where beginners could learn technique and timing before they went on board ship."[2]

Early rowing machines are known to have existed from the mid-1800s, a US patent being issued to W.B. Curtis in 1872 for a particular hydraulic based damper design. Machines using linear pneumatic resistance were common around 1900—one of the most popular was the Narragansett hydraulic rower, manufactured in Rhode Island from around 1900–1960.[3] However they did not simulate actual rowing very accurately nor measure power output.[4]

In the 1950s and 1960s, coaches in many countries began using specially made rowing machines for training and improved power measurement. One original design incorporated a large, heavy, solid iron flywheel with a mechanical friction brake, developed by John Harrison of Leichhardt Rowing Club in Sydney, later to become a professor of mechanical engineering at the University of New South Wales. Harrison, a dual Australian champion beach sprinter who went on to row in the coxless four at the 1956 Melbourne Olympics, had been introduced to rowing after a chance meeting with one of the fathers of modern athletic physiological training and testing, and the coach of the Leichhardt Guinea Pigs, Professor Frank Cotton. Cotton had produced a rudimentary friction-based machine for evaluating potential rowers by exhausting them, without any pretence of accurately measuring power output. Harrison realised the importance of using a small braking area with a non-absorbent braking material, combined with a large flywheel. The advantage of this design (produced by Ted Curtain Engineering, Curtain being a fellow Guinea Pig) was the virtual elimination of factors able to interfere with accurate results—for instance ambient humidity or temperature. The Harrison-Cotton machine represents the very first piece of equipment able to accurately quantify human power output; power calculation within an accuracy range as achieved by his machine of less than 1% remains an impressive result today. The friction brake was adjusted according to a rower's weight to give an accurate appraisal of boat-moving ability (drag on a boat is proportional to weight). Inferior copies of Harrison's machine were produced in several countries utilising a smaller flywheel and leather straps—unfortunately the leather straps were sensitive to humidity, and the relatively large braking area made results far less accurate than Harrison's machine. The weight correction factor tended to make them unpopular among rowers of the time. Harrison, arguably the father of modern athletic power evaluation, died in February 2012.[5]

Gjessing-Nilson rowing ergometer, showing helical pulley and flywheel

In the 1970s, the Gjessing-Nilson ergometer from Norway used a friction brake mechanism with industrial strapping applied over the broad rim of the flywheel. Weights hanging from the strap ensured that an adjustable and predictable friction could be calculated. The cord from the handle mechanism ran over a helical pulley with varying radius, thereby adjusting the gearing and speed of the handle in a similar way to the changing mechanical gearing of the oar through the stroke, derived from changes in oar angle and other factors. This machine was for many years the internationally accepted standard for measurement.

The first air resistance ergometers were introduced around 1980 by Repco.

In 1981, Peter and Richard Dreissigacker, and Jonathan Williams, filed for U.S. patent protection, as joint inventors of a "Stationary Rowing Unit". The patent was granted in 1983 (US 4396188A). The first commercial embodiment of the Concept2 "rowing ergometer" (as it came to be known) was the Model A, a fixed-frame sliding-seat design using a bicycle wheel with fins attached for air resistance. The Model B, introduced in 1986, introduced a solid cast flywheel (now enclosed by a cage) and the first digital performance monitor, which proved revolutionary. This machine's capability of accurate calibration combined with easy transportability spawned the sport of competitive indoor rowing, and revolutionised training and selection procedures for watercraft rowing. Later models were the C (1993) and D (2003).[3][6]

In 1995, Casper Rekers, a Dutch engineer, was granted a U.S. patent for a (US 5382210A) "Dynamically Balanced Rowing Simulator". This device differed from the prior art in that the flywheel and footrests are fixed to a carriage, the carriage being free to slide fore and aft on a rail or rails integral to the frame. The seat is also free to slide fore and aft on a rail or rails integral to the frame. From the patent Abstract: "During exercise, the independent seat and energy dissipating unit move apart and then together in a coordinated manner as a function of the stroke cycle of the oarsman."[7]

All rowing-machine designs consist of an energy damper or braking mechanism connected to a chain, strap, belt and/or handle. Footrests are attached to the same mounting as the energy damper. Most include a rail which either the seat or the mechanism slide upon. Different machines have a variety of layouts and damping mechanisms, each of which have certain advantages and disadvantages.

Currently available ergometer (flywheel-type) rowing machines use a spring or elastic cord to take up the pull chain/strap and return the handle. Advances in elastic cord and spring technology have contributed to the longevity and reliability of this strategy, but it still has disadvantages. With time and usage, an elastic element loses its strength and elasticity. Occasionally it will require adjustment, and eventually it will no longer take up the chain with sufficient vigour, and will need to be replaced. The resilience of an elastic cord is also directly proportional to temperature. In an unheated space in a cold climate, an elastic cord equipped rowing ergometer is unusable because the chain take-up is too sluggish. Thus, as the result of several factors, the force required to stretch the elastic cord is a variable, not a constant. This is of little consequence if the exercise device is used for general fitness, but it is an unacknowledged problem, the "dirty little secret", of indoor rowing competitions. The electronic monitor only measures the user input to the flywheel. It does not measure the energy expenditure to stretch the elastic cord. A claim of a "level playing field" cannot be made when a resistance variable exists (that of the elastic cord) which is not measured or monitored in any way (see more on this in "Competitions" section).

In the patent record, means are disclosed whereby the chain/cable take-up and handle return are accomplished without the use of a spring or elastic cord, thereby avoiding the stated disadvantages and defects of this broadly used method. One example is the Gjessing-Nilson device described above. Partially discernable in the thumbnail photo, it utilizes a cable wrapped around a helical pulley on the flywheel shaft, the ends of this cable being connected to opposite ends of a long pole to which a handle is fixed. The obvious disadvantage of this system is the forward space requirement to accommodate the extension of the handle pole at the "catch" portion of the stroke. The advantage is that, except for small transmission losses, all of the user's energy output is imparted to the flywheel, where it can be accurately measured, not split between the flywheel and an elastic cord of variable, unmeasured resistance. If a similar system were installed on all rowing ergometers used in indoor rowing competitions, consistency between machines would be guaranteed because the variability factor of elastic cord resistance would be eliminated, and this would therefore ensure that the monitor displayed actual user energy input.

In a 1988 US patent (US 4772013A), Elliot Tarlow discloses another non-elastic chain/cable take-up and handle return strategy. Described and depicted is a continuous chain/cable loop that passes around the flywheel sprocket and around and between fixed pulleys and sprockets positioned fore and aft on the device. The handle is secured in the middle of the exposed upper horizontal section of the chain/cable loop. Although somewhat lacking in aesthetics, the Tarlow device does eliminate the stated disadvantages and defects of the ubiquitous elastic cord handle return. Tarlow further argues that the disclosed method provides an improved replication of rowing because in actual rowing the rower is not assisted by the contraction of a spring or elastic cord during the "recovery" portion of the stroke. The rower must push the oar handle forward against wind and oarlock resistance in preparation for the next stroke. Tarlow asserts that the invention replicates that resistance.

A third non-elastic handle return strategy is disclosed in US patent, "Gravity Return Rowing Exercise Device" (US9878200 B2, 2018) granted to Robert Edmondson. As stated in the patent document, the utilization of gravity (i.e.: a weight) to take up the chain and return the handle eliminates the inevitable variability of handle return force associated with an elastic cord system and thereby ensures consistency between machines.

Machines with a digital display calculate the user's power by measuring the speed of the flywheel during the stroke and then recording the rate at which it decelerates during the recovery. Using this and the known moment of inertia of the flywheel, the computer is able to calculate speed, power, distance and energy usage. Some ergometers can be connected to a personal computer using software, and data on individual exercise sessions can be collected and analysed. In addition, some software packages allows users to connect multiple ergometers either directly or over the internet for virtual races and workouts.

An extremely efficient method of exercise, rowing uses 86% of muscles when done with correct form.[13] Its health benefits are often contrasted with those of spinning,[14][15][16] since both are dually categorized as static and dynamic exercises.[17] Indoor rowing primarily works the cardiovascular systems with typical workouts consisting of steady pieces of 20–40 minutes, although the standard trial distance for record attempts is 2000 m, which can take from five and a half minutes (best elite rowers) to nine minutes or more. Like other forms of cardio focused exercise, interval training is also commonly used in indoor rowing. While cardio-focused, rowing also stresses many muscle groups throughout the body anaerobically, thus rowing is often referred to as a strength-endurance sport.

The standard measurement of speed on an ergometer is generally known as the "split", or the amount of time in minutes and seconds required to travel 500 metres (1,600 ft) at the current pace — a split of 2:00 represents a speed of two minutes per 500 metres, or about 4.17 m/s (15.0 km/h).

Although ergometer tests are used by rowing coaches to evaluate rowers and are part of athlete selection for many senior and junior national rowing teams, "the data suggest that physiological and performance tests performed on a rowing ergometer are not good indicators of on water performance".[18]

Rowing technique on the erg broadly follows the same pattern as that of a normal rowing stroke on water, but with minor modifications: it is not necessary to "tap down" at the finish, since there are no blades to extract from water; but many who also row on water do this anyway. Also, the rigid, single-piece handle enables neither a sweep nor a sculling stroke. The oar handle during a sweep stroke follows a long arc, while the oar handles during a sculling stroke follow two arcs. The standard handle does neither. But regardless of this, to reduce the chance of injury, an exercise machine should enable a bio-mechanically correct movement of the user. The handle is the interface between the human and the machine, and should adapt to the natural movement of the user, not the user to the machine, as is now the case. During competitions an exaggerated finish is often used, whereby the hands are pulled further up the chest than would be possible on the water, resulting in a steep angulation of the wrists - but even with a normal stroke, stop-action images show wrist angulation at the finish, evidence that the standard rigid, single-piece handle does not allow the user to maintain a bio-mechanically correct alignment of hands, wrists, and forearms in the direction of applied force. On the Concept 2 website "Forum", many regular users of the indoor rower have complained of chronic wrist pain. Some have rigged handgrips with flexible straps to enable their hands, wrists, and forearms to maintain proper alignment, and thereby reduce the possibility of repetitive strain injury. Rowing machine manufacturers have ignored this problem.

Rowing on an ergometer requires four basic phases to complete one stroke; the catch, the drive, the finish and the recovery. The catch is the initial part of the stroke. The drive is where the power from the rower is generated while the finish is the final part of the stroke. Then, the recovery is the initial phase to begin taking a new stroke. The phases repeat until a time duration or a distance is completed.

The first indoor rowing competition was held in Cambridge, MA in February 1982 with participation of 96 on-water rowers who called themselves the "Charles River Association of Sculling Has-Beens".[19] Thus the acronym, "CRASH-B". A large number of indoor rowing competitions are now held worldwide, including the indoor rowing world championships (still known as CRASH-B Sprints) held in Boston, Massachusetts, United States in February and the British Indoor Rowing Championships held in Birmingham, England in November, or in more recent years the Lee Valley VeloPark London in December; both are rowed on Concept2s. The core event for most competitions is the individual 2000-m; less common are the mile (e.g., Evesham), the 2500 meter (e.g., Basingstoke—also the original distance of the CRASH-B Sprints). Many competitions also include a sprint event (100–500m) and sometimes team relay events.

Most competitions are organized into categories based on sex, age, and weight class. While the fastest times are generally achieved by rowers between 20 and 40 years old, teenagers and rowers over 90 are common at competitions. There is a nexus between performance on-water and performance on the ergometer, with open events at the World Championships often being dominated by elite on-water rowers. Former men's Olympic single scull champions Pertti Karppinen and Rob Waddell and five-time gold medalist Sir Steven Redgrave have all won world championships or set world records in indoor rowing. The British Graham Benton and the Italian Emanuele Romoli are two of the main "non-rower" that won several indoor rowing competitions.

In addition to live venue competitions, many erg racers compete by internet, either offline by posting scores to challenges, or live online races facilitated by computer connection. Online Challenges sponsored by Concept2 include the annual ultra-rowing challenge, the Virtual Team Challenge.[20]

• Rowbike
• Rowing
• Rowing tank

[1]