Diffuse optical mammography

Biological tissues are diffusive media, which means that light attenuation during propagation is due not only to absorption, but also to scattering. The former is related to the chemical composition of the medium and induces photon annihilation, whereas the latter depends on the microscopic inhomogeneities of its refractive index and determines deviations in photon's trajectory.[5] The absorption coefficient ${\displaystyle \mu _{a}}$ represents the probability per unit length that an absorption event takes place, while the scattering coefficient ${\displaystyle \mu _{s}}$ denotes the probability per unit length that a scattering event occurs.[16] However, many studies refer to the reduced scattering coefficient ${\displaystyle \mu _{s}^{'}=\mu _{s}(1-g)}$ rather than the simple scattering coefficient, in order to take into account the medium's anisotropy. The medium's anisotropy is represented by the factor ${\displaystyle g}$, which is the average cosine of the angular deflection.[5]

Light propagation through highly diffusive media is typically described through the heuristic approach of the radiative transport theory, sided by the so called “diffusion approximation”: scattering is assumed to be isotropic and strongly dominant over absorption. This is fairly accurate for example for the breast tissue, in the red and near infrared spectral range (between 600 and 1100 nm), known also as "therapeutic window". In the therapeutic window, light can penetrate a few centimetres, so that it can explore the volume at exam. This is the reason why photon migration in biological tissues is known also as "diffuse optics".[5]

The relation between reduced scattering coefficient and wavelength (${\displaystyle \lambda }$) derives from the Mie theory:[17]

${\displaystyle \mu '_{s}=a\left({\frac {\lambda }{\lambda _{0}}}\right)^{-b}}$

Experimental breast constituent's normalized absorption spectra. Hb stands for deoxy-hemoglobin, HbO2 for oxy-hemoglobin.[6]

where ${\displaystyle \lambda _{0}}$ is the reference wavelength and ${\displaystyle b}$ and ${\displaystyle a}$ refer to the size of the scattering centres and their density, respectively.

Regarding the absorption coefficient, the relation with ${\displaystyle \lambda }$ is mediated by the so-called “extinction coefficient” ${\displaystyle \epsilon _{i}(\lambda )}$,[18] that in combination with the Lambert-Beer law gives

${\displaystyle \mu _{a}=\sum _{i}\epsilon _{i}(\lambda )C_{i}}$

where ${\displaystyle C_{i}}$ is the concentration of the i^th breast constituent. Measuring ${\displaystyle \mu _{a}}$ at different wavelengths, the breast constituents’ concentrations can be extrapolated.

The main breast constituents are oxy and deoxy-hemoglobin, water, lipids and collagen.[6] In particular, collagen has been recognized as an indepedent risk factor for developing breast cancer.[19]

Blood strongly absorbs in the red spectral range, whereas collagen, water and lipids have their absorption peaks at wavelengths longer than 900 nm. The distinction between oxy and deoxy-haemoglobin is due to the presence of a second large peak in the case of oxy-haemoglobin. Lipids are characterized by absorption maxima at 930 nm and 1040 nm, while the wavelength 975 nm is sensitive to water. Finally, an absorption peak for collagen takes place at 1030 nm.[16][6]

In time-domain measurements, short light pulses of the order of hundreds of picoseconds are delivered to the breast and its optical properties are retrieved from the features of the re-emitted pulses, which have undergone delay, broadening and attenuation.[25][30] Time-correlated single photon counting is fundalmental to cope with the low-level output signal.[28]

In frequency-domain measurements, an intensity-modulated signal is injected into the breast and its optical properties are deduced from the dephasement and the demodulation of the output signal with respect to the input one. The measurement is repeated for different values of the frequency modulation.[29][31]

In continuous wave (CW) measurements, the light source is a continuous wave laser, which hinders the separation of the absorption and scattering contributions with a single measurement. A possible solution is to perform space or angle-resolved measurements. In general, the CW approach is combined with the frequency domain one, in order to reinforce the strenghts of both.[27]

A denser breast is more likely to develop breast cancer.[19] A dense breast is characterized by a meaningful amount of fibrous tissue, relatively to the adipose one. The main constituents of a fibrous tissue are water, collagen and hemoglobin and optical mammography is able to discriminate and quantify tissues' components.[1] Therefore, by measuring breast constituents' concentrations, optical mammography could assess breast cancer risk.[1][32][33]

Tumours are generally made of fibrous tissue and could be recognized in the constituents' maps as local spots with higher concentrations of water, collagen and hemoglobin with respect to the surrounding, mostly adipose, healthy tissues. Studies demonstrate that the variation in concentration with respect to the healthy tissue is statistically more marked in the case of malignant tumours than benign ones.[34][35] In addition, the scattering coefficient is generally higher for benign lesions. Such distinctions suggest that optical mammography could characterize breast lesions.[34][35][36][37]

Breast cancer management depends on the characteristics of the tumour and the patient's condition. One of the possible strategies is the administration of neoadjuvant therapy, whose goal is to shrink the tumour size before surgery.[38] Studies show that if the therapy is efficient, then the water, collagen and hemoglobin contents of the lesion show a decreasing behaviour over time, which suggests that the initially fibrous tissue acquires features similar to the adipose one.[3][39] Optical measurements in correspondence with therapy sessions could track its evolution, so to assess the patient's response to it. Moreover, it is believed that therapy effectiveness could be predicted even on the first day of treatment on the base of initial breast constituents' concentrations.[40][41]