Churchill Barriers

The Churchill Barriers are four causeways in the Orkney Islands (at 58.8929°N 2.8963°W / 58.8929; -2.8963 (Churcill Barrier 1), 58.8820°N 2.9028°W / 58.8820; -2.9028 (Churcill Barrier 2), 58.8708°N 2.9144°W / 58.8708; -2.9144 (Churcill Barrier 3), and 58.8411°N 2.9047°W / 58.8411; -2.9047 (Churcill Barrier 4)), with a total length of 2.3 kilometres (1.4 mi). They link the Orkney Mainland in the north to the island of South Ronaldsay via Burray and the two smaller islands of Lamb Holm and Glimps Holm.

The barriers were built in the 1940s, primarily as naval defences to protect the anchorage at Scapa Flow, but now serve as road links. The two southern barriers, Glimps Holm to Burray and Burray to South Ronaldsay, are Category A listed.[1][2]

History

On 14 October 1939, the Royal Navy battleship HMS Royal Oak was sunk at her moorings within the natural harbour of Scapa Flow, by the German U-boat U-47 under the command of Günther Prien. U-47 had entered Scapa Flow through Holm Sound, one of several eastern entrances to Scapa Flow.

The eastern passages were protected by measures including sunken block ships, booms and anti-submarine nets, but the U-47 entered at night at high tide by navigating between the block ships.

To prevent further attacks, the First Lord of The Admiralty Winston Churchill ordered the construction of permanent barriers. Work began in May 1940 and the barriers were completed in September 1944 but were not officially opened until 12 May 1945, four days after Victory in Europe Day.

Construction

The contract for building the barriers was awarded to Balfour Beatty, although part of the southernmost barrier (between Burray and South Ronaldsay) was sub-contracted to William Tawse & Co. The first Resident Superintending Civil Engineer was E K Adamson, succeeded in 1942 by G Gordon Nicol.

Preparatory work on the site began in May 1940, while experiments on models for the design were undertaken at Whitworth Engineering Laboratories at the University of Manchester.

The bases of the barriers were built from gabions enclosing 250,000 tonnes of broken rock, from quarries on Orkney. The gabions were dropped into place from overhead cableways into waters up to 18 metres (59 ft) deep. The bases were then covered with 66,000 locally cast concrete blocks in five-tonne and ten-tonne sizes. The five-tonne blocks were laid on the core, and the ten-tonne blocks were arranged on the sides in a random pattern to act as wave-breaks.

Labour

A project of this size required a substantial labour force, which peaked in 1943 at over 2,000.

Much of the labour was provided by over 1,300 Italian prisoners of war who had been captured in the desert war in North Africa; they were transported to Orkney from early 1942 onwards.

The prisoners were accommodated in three camps, 600 at Camp 60 on Little Holm and the remaining 700 at two camps on Burray. Those at Camp 60 built an ornate Italian Chapel, which still survives and has become a tourist attraction.

References
  1. Historic Environment Scotland. "Churchill Barrier No 3, Glimps Holm to Burray... (LB52392)". Retrieved 7 June 2020.
  2. Historic Environment Scotland. "Churchill Barrier No 4, Burray to South Ronaldsay... (LB52417)". Retrieved 7 June 2020.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.