Bobbin lace

Bobbin lace is a lace textile made by braiding and twisting lengths of thread, which are wound on bobbins to manage them. As the work progresses, the weaving is held in place with pins set in a lace pillow, the placement of the pins usually determined by a pattern or pricking pinned on the pillow.

Bobbin lace in progress at the Musée des Ursulines de Québec

Bobbin lace is also known as pillow lace, because it was worked on a pillow, and bone lace, because early bobbins were made of bone[1] or ivory.

Bobbin lace is one of the two major categories of handmade laces, the other being needlelace, derived from earlier cutwork and reticella.[2]

Origin
Early bobbin lace in gold and silver thread, c. 1570.

A will of 1493 by the Milanese Sforza family mentions lace created with twelve bobbins.[3]

Bobbin lace evolved from passementerie or braid-making in 16th-century Italy.[2] Genoa was famous for its braids, hence it is not surprising to find bobbin lace developed in the city. It traveled along with the Spanish troops through Europe.[4] Coarse passements of gold and silver-wrapped threads or colored silks gradually became finer, and later bleached linen yarn was used to make both braids and edgings.[5]

The making of bobbin lace was easier to learn than the elaborate cutwork of the 16th century, and the tools and materials for making linen bobbin lace were inexpensive. There was a ready market for bobbin lace of all qualities, and women throughout Europe soon took up the craft which earned a better income than spinning, sewing, weaving or other home-based textile arts. Bobbin lace-making was established in charity schools, almshouses, and convents.[2]

In the 17th century, the textile centers of Flanders and Normandy eclipsed Italy as the premiere sources for fine bobbin lace, but until the coming of mechanization hand-lacemaking continued to be practiced throughout Europe, suffering only in those periods of simplicity when lace itself fell out of fashion.[2]

Structure

Bobbin lace may be made with coarse or fine threads. Traditionally it was made with linen, silk, wool, or, later, cotton threads, or with precious metals. Today it is made with a variety of natural and synthetic fibers and with wire and other filaments.

Elements of bobbin lace may include toile or toilé (clothwork), réseau (the net-like ground of continuous lace), fillings of part laces, tapes, gimp, picots, tallies, ribs and rolls. Not all styles of bobbin lace include all these elements.

  • The close up of the back shows the fillings are sewn onto the ribs and tied off
  • A single plait can choose a clever path to construct a filling with sewings but without tying off
  • mesh (or ground) with a solitary gimp
  • Picots. Top: double threaded, bottom single threaded.
  • Raised work, a rib on top of the left section, a roll on top of the right section
  • Rectangular tallies
  • Another common shape of tallies arranged as flower petals
  • Mesh ground motif; toilé with a gimp, corner of half stitch, petals of cloth stitch
  • part lace motifs, before being assembled
  • completed part lace
  • A Tape (or braid) with footside on the left and a headside on the right
  • top headside bottom footside

Traditional types

Many styles of lace were made in the heyday of lacemaking (approximately the 16th–18th centuries) before machine-made lace became available.

Contemporary laces
Contemporary handmade woollen bobbin lace articles, Wool Expo, Armidale NSW. Pale green lace is made of 2 ply wool.

The advent of machine-made lace at first pushed lace-makers into more complicated designs beyond the capabilities of early machines, then simpler designs so they could compete on price, and finally pushed them out of business almost entirely.

The resurgence of lace-making is a recent phenomenon and is mostly done as a hobby. Lacemaking groups still meet in regions as varied as Devonshire, England and Orange County, California.[7] In the European towns where lace was once a major industry, especially in Belgium, England, Spain (Camariñas and Almagro), northern and centre Portugal, France and Slovenia lacemakers still demonstrate the craft and sell their wares, though their customer base has shifted from the wealthy nobility to the curious tourist.

Still new types of lace are being developed such as the 3D Rosalibre[8] and a colored version of Milanese lace by borrowing rolls from Duchesse lace to store various shades and colors.[9] Other artists are giving grounds a major role by distorting and varying stitches, pin distances and thread sizes or colours. The variations are explored by experimentation[10][11][12] and mathematics and algorithms.[13] The lace maintaining its shape without stiffening is no longer a requirement.[10] Inspiring journals, guilds and foundations show that old techniques with a new twist can challenge young people to create works that can definitely classify as art.[14] A Dutch design graduate in 2006 discovered bobbin lace was a technique to make a fancy fence. The first fences became museum pieces. The fences are now produced in Bangalore by concrete rebar plaiters.[15]

Tools
prickings for various types of lace and a very fine hook

The major tools to make bobbin lace are a pillow, bobbins, pins and prickings. The part laces also require a crochet hook, very fine types of lace require very fine hooks. There are different types of pillows and bobbins linked to areas, eras and type of lace.

Bobbins

Bobbins, which are traditionally made of wood or bone, are used to hold the thread. They come in different shapes, often associated with certain types of lace. The parts of a bobbin are the neck, which is where the thread is wound, a head, where thread is hitched to keep it from coming unwound, and the shank, which is used as a handle. Bobbins from England may also have a beaded spangle at the end of the shank, which makes the bobbin heavier and helps with tensioning the thread.[16] Bobbins are usually 3 1/2 - 4 inches long, though they may be shorter or longer.[17] Bobbins are wound and used in pairs.

There are many types of bobbins, including:

  • Belgian bobbins: They have a single head and a bulbous rounding near the end of the shank that helps with tensioning threads.[18]
  • Binche bobbins: The bulbous rounding need the end of the shank is small, making these bobbins good for fine, straight laces.
  • East Midlands bobbins: These double-headed bobbins are slender and spangled. They are also called Bucks or Midlands bobbins.[18]
  • Honiton bobbins: Honiton bobbins are straight below the single head, and the end of the shank comes to a blunt point, which helps with sewing. They may be called a lace stick.[18]
  • Square bobbins: Square bobbins have a shank with flattened sides, which makes it easier to keep them from rolling on the pillow.
  • Cat tails, the points are convenient for sewing
  • Danish bobbins
  • Spangled bobbins
  • Hooded bobbins
  • Large bulbs to throw every now and then, Cogne
  • winding schemes with a single hitch

Types of pillow

The pillows must be firm, or otherwise the pins will wobble. The pillows were traditionally stuffed with straw, but nowadays polystyrene (styrofoam) is generally used.[19]

An early type of pillow can be seen in The Lace-Maker by Caspar Netscher. The pillow has a wooden frame, and is slightly sloping. The lace-maker rests it on her lap.

The bolster or cylindrical pillow was much cheaper to make as it is just a fabric bag stuffed with straw. It was used in Bedfordshire lace. It needs a stand as it does not have a flat bottom.[20] Usually the bolster had the pattern pinned round the cylinder, so by turning the pillow, the lace could be as long as was needed. However, Maltese lacemakers used the pillow the other way. They had a long thin pillow, which they rested against something. Then they worked the lace down the length of the pillow.[21]

This problem (of the lace needing to be longer than the pillow) is solved in a different way by the roller pillow, which has a small roller, for working the lace, set into a larger area, where the bobbins are laid. This means that the pattern can be pinned round the roller, but the pillow has a flat bottom.

The cheapest modern pillow is domed and made of polystyrene (styrofoam). It is often called a cookie pillow, because of its shape. Another modern pillow is a block pillow, with a frame which holds covered polystyrene blocks. The blocks can be moved around as the lace progresses, to keep the lace being worked on at the centre of the pillow.

Lacemaking organizations

Lacemaking is considered a folk art with technique and materials varying widely across the globe. Most lacemakers belong to regional guilds within their country of origin. Guilds can be devoted to one kind of lace, often that which developed locally, or may include makers of all kinds. In the United States, most guilds are organized within chapters of the International Organization of Lace, which also includes Canadian lace guilds. Internationally, the Organisation Internationale de la Dentelle au Fuseau et à l'Aiguille (International Bobbin and Needle Lace Organization) is the primary governing and networking body for lacemakers. OIDFA organizes annual global congresses, regional fairs, and local gatherings to promote the appreciation and knowledge of lacemaking.

References
  1. Oxford English Dictionary definition of "bone lace"
  2. Santina M. Levey (2003). "Lace in the Early Modern Period c. 1500-1780". In D.T. Jenkins (ed.). Cambridge History of Western Textiles. Cambridge University Press. pp. 585–580.
  3. Verhaegen, Pierre (1912). La Dentelle Belge. Brussel: L. Lebègue. p. 10.
  4. Reigate, Emily (1986). An Illustrated Guide to Lace (1988 ed.). Antique Collers' Club Ltd. p. 44. ISBN 1-85149-003-5.
  5. Janine Montupet, Ghislaine Schoeller (1988). Fabuleuses dentelles. Robert Laffont. pp. 16–18. ISBN 9782221057544.
  6. Earnshaw, Pat (1985). The Identification of Lace. De Bilt: Cantecleer. ISBN 9021302179.
  7. "Lacemaking: Associations and Guilds". Fibre Arts Online Web. Archived from the original on February 3, 2012. Retrieved 8 August 2011.
  8. Belleville, Cathleen (2002). Introducing Rosalibre Bobbin Lacle.
  9. Woods, Sandy (2003). Special Effects in Bobbin Lace. Batsford. ISBN 0713480718.
  10. Wanzenried, Esther (2014). "Moderne Gronden". Kantbrief (2014–4): 24–25.
  11. Voelcker-Löhr, Ulrike (2003). Viele Gute Gründe. Bochum.
  12. Ulrich, Uta (2009). Gründe mit System. Gammelby: Fay, Barbara Verlag. ISBN 978-3925184086.
  13. Irvine, Veronika; Ruskey, Frank (2014). "Developing a Mathematical Model for Bobbin Lace". Journal of Mathematics and the Arts. 8 (3–4): 95–110. arXiv:1406.1532. Bibcode:2014arXiv1406.1532I. doi:10.1080/17513472.2014.982938.
  14. Dings, Marcella (2014). "Schatgraven - Uitdaging" [Treasure Hunt - Challenge]. Kantbrief (2014–4): 34.
  15. de Vries-de Graaf, Tonny (2011). "Lace Fence (1)" (PDF). Kantbrief (in Dutch) (2011–3): 18–20. Retrieved 26 December 2014.
  16. Dye, Gilian; Thunder, Adrienne (2007). Beginner's guide to bobbin lace. Tunbridge Wells: Search. pp. 8–9. ISBN 9781844481088. OCLC 163617814.
  17. Hopewell, Jeffery (1984). Pillow lace and bobbins (Third ed.). Aylesbury: Shire Publications Ltd. p. 15. ISBN 0852636598. OCLC 12516276.
  18. Stillwell, Alexandra (1996). Cassell illustrated dictionary of lacemaking. London: Cassell. ISBN 0304341452. OCLC 34597563.
  19. The Lace Guild. "Bobbin Lace". Archived from the original on 9 December 2014. Retrieved 4 December 2014.
  20. Elizabeth Mincoff (1981). Pillow Lace. Ruth Bean. ISBN 0-903585-10-3.
  21. "Maltese Crafts". VassaloMalta. 2013-04-18. Retrieved 21 November 2014.

Further reading
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.