BETiC

BETIC (Biomedical Engineering and Technology (incubation) Centre) based at Indian Institute of Technology Bombay is an inter-disciplinary multi-institution initiative for medical device innovation.[1] Established in 2014 with support from the government of Maharashtra, it comprises a network of 14 engineering and medical institutes across the state.[2] The BETIC team have developed 50 medical devices as of 2019, and licensed 16 of them to startup companies or industry for mass production.

Biomedical Engineering and Technology Innovation Centre
BETIC Lab at IIT Bombay
AbbreviationBETIC
Established2014
Location
  • IIT Bombay, Mumbai, India
Websitebetic.org

History

BETIC has its origins in a study conducted by Maharashtra University of Health Sciences, which concluded with a brainstorming meeting at Sahyadri Guest House, Mumbai in Dec 2009. This was attended by about 25 representatives of government, academia and medical community, who unanimously recommended setting up a center for indigenous development of affordable medical devices.

The study was funded by Rajiv Gandhi Science & Technology Commission, government of Maharashtra. Its chairperson Dr. Anil Kakodkar invited IIT Bombay to develop a proposal for incubating a biomedical engineering and technology centre based on hub-and-spoke model.[3] This was approved in April 2014 as a five-year project, with a mandate to develop 12 different medical devices and train 50 innovators. BETIC started functioning from OrthoCAD lab in IIT Bombay in early 2015, followed by two satellite centers established at Visvesvaraya National Institute of Technology, Nagpur and College of Engineering, Pune.

In the next three years (2016-2018), another four engineering institutes and four medical institutes set up self-funded BETIC cells in collaboration with the first three centers. The Medical Education and Drug Department of Maharashtra approached IIT Bombay to set up three more BETIC cells in government hospitals; this agreement was exchanged in the presence of Chief Minister of Maharashtra, Devendra Fadanavis in February 2019 at Sahyadri guest house, the same place where the first meeting took place ten years earlier.[4] Andhra Pradesh Med Tech Zone, Visakhapatnam and Gujarat Technological University, Ahmedabad also signed agreements with IIT Bombay for collaboration with BETIC.

At the 5th annual review, symposium and expo of BETIC held at IIT Bombay on 12–13 April 2019[5], over 100 stakeholders representing the government, academia, medical community, startups, industry and investors discussed how to sustain, replicate and scale up the healthcare innovation eco-system.

Centres and key people

BETIC network comprises one main center, two satellite centers, four cells in engineering institutes and seven cells in medical institutes. The centers and their respective founders are listed here.

Main center

The center has facilities for 3D scanning, CAD/CAM, 3D printing in biocompatible plastic and metal, printed circuit board design and fabrication, and basic mechanical testing. It is managed by Dr. Rupesh Ghyar, Senior Executive Officer.

Satellite centers

Engineering institute cells

Medical institute cells

Innovation process

BETIC uses a collaborative innovation model comprising four stages: defining an unmet clinical need where doctors play a critical role, developing a novel solution by researchers, delivering a well-tested product by entrepreneurs, and deploying it in clinical practice supported by investors.[6] The goal is to take new ideas through invention and innovation to impact. This process is referred to as 'bedside to bench to business to bedside', enabling creation of affordable, effective, reliable and suitable products for healthcare in India and other developing countries.

The Centre organizes Medical Device Hackathon (MEDHA) during weekends in July, and week-long Medical Device Innovation Camp (MEDIC) in September.[7] Participants include final year students, entrepreneurs, working professionals, teachers and incubation managers. Inter-disciplinary teams of four people are formed, one each from medical, design, electronics and mechanical backgrounds. They select problems from a curated list prepared in consultation with hospitals, evolve novel solution concepts, fabricate proof-of-concepts, and present them to a jury panel. Eight MEDHA and five MEDIC organized during 2015-2019 had more than 700 participants in total. Several winners joined BETIC full-time for developing and commercializing the products; most of them incubated startup companies.

The innovation process of BETIC received ISO 13485 certification of quality management system for medical devices, in 2018.

Products and partners

Medical devices developed by BETIC researchers span different medical specialties and risk classes, including medical diagnosis devices, surgical instruments, implants and prostheses. Seven products were licensed to startup companies incubated by the innovators, and five to industry partners.

Startup companies

  • Orthopedic surgery planner - AlgoSurg Products (Dr. Vikas Karade)
  • Smart stethoscope module - Ayu Devices (Adarsha K, Tapas Pandey)
  • Diabetic foot screening device - Ayati Devices (Nishant Kathpal)
  • Stance-controlled knee ankle foot orthosis - Aumeesh Tech (Aneesh Karma)
  • Endo-tracheal blockage detector - Atmen Technovention (Abhijeet Bhagat)
  • Hybrid plaster splint - MediAsha Technologies (Mayur Sanas)
  • Silicone implants - NU OSSA Mediquip (Piyush Ukey)
  • Patient-specific custom implants - Lucid Implants (Pranav Sapkal)
  • Glaucoma screener - OKO Icare Solutions (Neha Lande)
  • Maxillofacial surgery guides - Precisurg (Sandeep Dahake)
  • Skin spray gun - Pacify Medical (Saiprasad Poyarekar)
  • Jaw relation recorder - Prosthocentric (Dr. Jayant Palaskar)

Industry partners

  • Clubfoot brace monitor - Metwiz Materials (Lokap Sahu)
  • Multi-use biopsy gun - Tenon Meditech (Jaydip Deshpande)
  • Laparoscopy instrument - Eclipse Instrumentation (Priyal Nagare)
  • Nasal osteotomy forceps - Om Surgicals (Rashmikant Gangar)
  • Above knee prosthetic leg - Ratna Nidhi Charitable Trust (Rajiv Mehta)

Awards

Biotechnology Ignition Grant (BIG) instituted by Biotechnology Industry Research Assistance Council, under the Ministry of Science and Technology, Delhi, was won ten times by BETIC innovators.[8] Other awards include Gandhian Young Technological Award (twice), DST India Innovation Growth Programme Medal (thrice), Google Impact Challenge for Disabilities Award, Dr. Albert Schweitzer International Health Award, Dr. B.C. Roy International Award, Emerging Startup of the Year, American Bazaar StartUp Competition, Young Entrepreneur Award, SICOT Research Award, SKB Seva Samaj Award, Maharashtra AI Innovation Challenge Award, NCPEDP-Mphasis Universal Design Award and IET IOT Challenge Award - Healthcare track.

References

  1. "BETiC". www.betic.org. Retrieved 2019-04-20.
  2. DelhiMarch 28, Roshni Chakrabarty New; March 28, 2019UPDATED; Ist, 2019 14:22. "How IIT Bombay's healthcare innovation centre BETiC is solving India's massive doctor shortage". India Today. Retrieved 2019-04-20.CS1 maint: numeric names: authors list (link)
  3. Anonymous (2017-02-18). "Sanctioned Projects". rgstc.maharashtra.gov.in. Retrieved 2019-04-20.
  4. "Haffkine And IITB-BETiC Join Hands To Promote Medical Device Innovation". Sakshipost. Retrieved 2019-04-20.
  5. "IIT-B & BETiC unveils 20 low-cost medical device innovations". businessfortnight.com. 2019-04-14. Retrieved 2019-04-21.
  6. Ravi, B. (2018-05-23). The Essence of Medical Device Innovation. The Write Place.
  7. India, Press Trust of (2018-09-28). "Doctors, engineers innovate for low-cost healthcare at". Business Standard India. Retrieved 2019-04-20.
  8. "List of Beneficiaries". birac.nic.in. Retrieved 2019-04-20.
  1. Biomedical Engineering and Technology incubation Centre, IIT Bombay, Mumbai
  2. Biotechnology Industry Research Assistance Council, New Delhi
  3. Ravi, B., The Essence of Medical Device Innovation, The Write Place, Crossword, Mumbai, 2018
  4. "Low-cost portable diabetic foot screener makes debut at IIT-Bombay innovation camp,” Indian Express, 1 Nov 2019
  5. "15 novel medical devices conceived within 100 hours at camp in IIT Bombay,” India Today, 7 Oct 2019
  6. "15 innovations at centre of BETiC IIT Bombay med-tech camp,” Economic Times Health World, 1 Oct 2019
  7. "IIT-B’s BETiC making a difference in healthcare industry" Medical Equipment & Automation, 1 Aug 2019
  8. "IIT Bombay professor pens medical device innovation book", NDTV, 24 Oct 2018
  9. "BETiC IIT-B launches Medical Device Hackathon - MEDHA 2019", India Today, 25 June 2019
  10. "Hybrid plaster splint, biopsy gun among 20 new products," Hindustan Times, 19 Apr 2019
  11. "3 best medical devices innovations at IIT-B get Rs 50 lakh grant" Free Press Journal, 16 April 2019
  12. "Portable surgery tent of 20 medical innovations at IIT-Bombay" Times of India, Mumbai, 14 April 2019
  13. How IIT Bombay’s healthcare innovation centre BETiC is solving India’s massive doctor shortage,” India Today Online, 28 March 2019
  14. Haffkine Institute, IIT to Start Biomedical Incubation Centre,” The Hindu, 15 Feb 2019
  15. We need more screening devices for specific diseases,” Express Healthcare, 7 Feb 2019
  16. New low-cost device to diagnose glaucoma in time, prevent blindness,” The Hindustan Times, 11 Jan 2019
  17. "Poonam Mahajan invites IIT-B BETiC to conduct low cost medical device camps in her adopted villages," Mid-Day, 9 Dec 2018
  18. "Doctors, engineers innovate for low-cost healthcare at MEDIC," Business Standard, 28 Sep 2018
  19. How IIT-Bombay’s MEDIC initiative is making a difference: new technology for smarter medical aids,” Mumbai Mirror, 29 Aug 2018
  20. More Than Just A Heart Beat” Outlook Business, 22 June 2018, pp. 22–25
  21. The Frugal Innovators at IIT Bombay,” Forbes India, 11 May 2018, pp. 42–44
  22. IIT-B researchers develop steth that can filter noises,” Free Press Journal, 3 May 2018
  23. CoEP develops instant splint for injured limbs”, Times of India, Pune, 10 Feb 2017
  24. Jaipur foot gets a leg-up, 3D-printed version ready”, Times City, Times of India, Mumbai, Monday 7 Nov 2016
  25. Meet produces prototypes for 20 new medical devices”, Times of India, Nagpur, Saturday, 24 Sep 2016
  26. Google.org announces grant funding of Rs 54 million for three Indian non-profits" Economic Times, 4 March 2016
  27. High-quality low-cost indigenous medical devices created at IIT-B lab,” Hindustan Times, 24 April 2015
  28. IIT-B scholar develops software to convert 2D X-ray into 3D," Times of India, 26 Feb 2015.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.