BESYS

The system was developed because Bell recognized a "definite mismatch…between the 704's internal speed, the sluggishness of its on-line unit-record equipment, and the inherent slowness of manual operations associated with stand-alone use."[1]

The goals of the system were:

• Flexible use of hardware, nonstop operation.
• Efficient batch processing, tape-to-tape operation with offline spooling of unit-record data.
• Use of control cards to minimize the need for operator intervention.
• Allow user programs access to input/output functions, system control and program libraries.
• Core dump facilities for debugging.
• Compatility with the IBM 650.[1]

The initial version of the system BESYS-1 was in use by October 16, 1957.[1] It was created by George H. Mealy and Gwen Hansen with Wanda Lee Mammel under the guidance of Victor A. Vyssotsky and utilized IBM's FORTRAN and United Aircraft's Symbolic Assembly Program (SAP) programming languages. It was designed to efficiently deal with a large number of jobs originating on punched cards and producing results suitable for printing on paper and punched cards. The system also provided processing capabilities for data stored on magnetic tapes and magnetic disk storage units. Typically punched card and print processing was handled off line by peripheral Electronic Accounting Machines, IBM 1401 computers, and eventually direct coupled computers.

The first system actually used at Bell Labs was BESYS-2. The system was resident on magnetic tape, and occupied the lowest 64 (36-bit) words and the highest 4 K words of memory. The upper 4 K words held the resident portion of the monitor, and could be partially swapped to magnetic drum to free up additional core for the user program if needed.[1]

"BESYS was a complex software package that provided convenient input/output and integrated disk file storage facilities."[2]

BESYS was used extensively by many departments of Bell Labs for over a decade. It was made available through the SHARE organization to others without charge or formal technical support.

Versions of the BESYS environment (BESYS-3 (1960), BESYS-4 (1962), BESYS-5 (1963), BESYS-7 (1964), and BE90 (1968)[1]) were implemented as the underlying computers transitioned through the IBM 709X family. BESYS development was discontinued when Bell Labs moved to the IBM System/360 in 1969. Throughout this period the head of the BESYS development project was George L. Baldwin.