ZF 5HP transmission

This article describes automobile transmission. For heavy-duty 5 speed automatic transmission, see ZF Ecomat.

The ZF 5HP is a five-speed automatic transmission for longitudinal engine applications, designed and built by ZF Friedrichshafen AG's subsidiary in Saarbrücken.

5HP18

Introduced in 1991 on the BMW E36 320i/325i and E34 5 Series.

Applications
  • 1992-1993 BMW E32 — 730i M60B30
  • 1992-1995 BMW E34 — 530i M60B30
  • 1992-1995 BMW E34 — 525tds M51D25
  • 1995-2000 BMW E38 — 725tds M51D25
  • 1994-1996 BMW E38 — 730I M60B30
  • 1993-1996 BMW E36 — M3 S50B30us
  • 1995-1999 BMW E36 — 328i M52B28 - BMW Part No A5S 310Z
  • 1997-1999 BMW E36 — M3 3.2 S52B32
  • 1995-1999 BMW E39 — 528i M52B28
  • 1995-1999 BMW E39 — 525tds

5HP19

Introduced in 1996, it is still in production, and has been used in a variety of cars from Audi, BMW, Porsche, and Volkswagen Passenger Cars.

Applications

BMWlongitudinal engine, rear wheel drive

5HP19FL

Porschemid engine transaxle 5-speed tiptronic #1060, rear-wheel drive A87.01-xxx, A87.02-xxx, A87.21-xxx

Volkswagen Grouplongitudinal engine transaxle, front-wheel drive

5HP19FLA

Volkswagen Grouplongitudinal engine, transaxle permanent four-wheel drive

1999 (DRN/EKX) transmissions used Induction speed sensors and 2000+ (FAS) transmissions used Hall Effect sensors. These transmissions are mechanically the same, but are not interchangeable.

5HP19HL

Porschelongitudinal engine rear engine transaxle

5HP19HLA

Porschelongitudinal engine rear engine transaxle

5HP24

Introduced in 1996, it is still in production, and has been used in a variety of cars from Audi, BMW, Jaguar, and Land Rover – all with a front mounted longitudinal engine.

Input torque maximum is 440 newton metres (320 lb⋅ft)

Gear ratios:

1 2 3 4 5 R
3.57 2.20 1.51 1.00 0.80 4.68
  • Weight: ~95 kilograms (209 lb)
  • Oil capacity: ~9.9 litres (2.2 imp gal; 2.6 US gal)
Applications

5HP24A

Four-wheel drive version used in Audi (quattro) and Volkswagen Passenger Cars (4motion) marques of the Volkswagen Group:

Input torque maximum is 430 newton metres (320 lbf⋅ft)

Gear ratios:

1 2 3 4 5 R R R
3.57 2.20 1.51 1.00 0.80 4.10
  • Weight: ~142 kilograms (313 lb)
  • Oil capacity: ~11 litres (2.4 imp gal; 2.9 US gal)

5HP30

Introduced in 1992, it was produced through 2003, and has been used in a variety of cars from Aston Martin, Bentley, BMW, and Rolls Royce.

Input torque maximum is 560 newton metres (410 lb⋅ft)

Gear ratios:

1 2 3 4 5 R
3.55 2.24 1.54 1.00 0.79 3.68
Applications

See also

References

  1. "ZF Parts Catalog" (PDF). zf.com. Archived from the original on 2012-09-06.
  • "ZF North America Application Chart (automatic)" (PDF). ZF-Group.com. Archived from the original (PDF) on 6 November 2016.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.